VisionNet M504 Manuale utente
M504
ADSL2+ Ethernet Broadband Gateway
4 Port Ethernet USB 2.0
End User Manual
Manual Ver1.0
- 2 -
Table of Contents
1. INTRODUCTION.........................................................................................................................................................................4
1.1 FEATURES............................................................................................................................................................................4
1.2 SYSTEM REQUIREMENTS......................................................................................................................................................4
2. INSTALLATION...........................................................................................................................................................................5
FRONT PANEL.....................................................................................................................................................................................5
REAR PANEL.......................................................................................................................................................................................6
CONNECTING THE HARDWARE...........................................................................................................................................................6
Step 1. Connect the ADSL cable and optional telephone ..............................................................................................................6
Step 2. Connect the Ethernet cable ...............................................................................................................................................6
Step 3. Attach the power connector...............................................................................................................................................7
Step 4. Turn on the M504 and power up your systems..................................................................................................................7
Step 5. Configure the M504 through the WEB interface................................................................................................................7
Step 6. Save the configurations and Reboot ..................................................................................................................................7
3. CONFIGURATION......................................................................................................................................................................8
3.1 SETUP..................................................................................................................................................................................8
3.2 ESTABLISH THE CONNECTION ..............................................................................................................................................8
4. QUICK VIEW...............................................................................................................................................................................9
5. LAN..............................................................................................................................................................................................10
5.1 LAN..................................................................................................................................................................................10
6. SECURITY....................................................................................................................................................................................12
6.1 IPFILTERING .....................................................................................................................................................................12
6.2 URLFILTERING .................................................................................................................................................................14
6.3 PORT FORWARDING............................................................................................................................................................15
6.4 PORT TRIGGERING..............................................................................................................................................................16
6.5 DMZ HOST .......................................................................................................................................................................17
6.6 WANACCESS CONTROL.....................................................................................................................................18
7. DNS ..............................................................................................................................................................................................20
Manual Ver1.0
- 3 -
7.1 DYNAMIC DNS..................................................................................................................................................................20
8. USB STORAGE (DLNA)............................................................................................................................................................21
9. IPSEC........................................................................................................................................................................22
10.SYSTEM DIAGNOSTIC............................................................................................................................................................24
10.1 SYSTEM DIAGNOSTICS .......................................................................................................................................................24
10.2 INBOUND TOOLKIT.............................................................................................................................................................25
10.3 OUTBOUND TOOLKIT..........................................................................................................................................................25
11.GATEWAY STATISTICS...........................................................................................................................................................26
11.1 xDSL................................................................................................................................................................................26
11.2 ATM .................................................................................................................................................................................26
11.3 WAN.................................................................................................................................................................................27
11.4 LAN..................................................................................................................................................................................28
11.5 HOSTS.............................................................................................................................................................................28
11.6 ROUTE...............................................................................................................................................................................28
11.7 DHCP...............................................................................................................................................................................29
12.MANAGEMENT.........................................................................................................................................................................30
12.1 RUNNING CONFIGURATION.................................................................................................................................................30
12.2 NTPCLIENT ......................................................................................................................................................................30
12.3 MANAGEMENT ACCOUNTS .................................................................................................................................................32
12.4 WARM REBOOT................................................................................................................................................................32
13.APPENDIX A –SPECIFICATIONS .........................................................................................................................................33
14.APPENDIX B –WARRANTIES................................................................................................................................................35
15. APPENDIX C –REGULATIONS .............................................................................................................................................36
16. CONTACT INFORMATION.....................................................................................................................................................38
Manual Ver1.0
- 4 -
1. Introduction
Congratulations on becoming the owner of the VisionNet M504 ADSL2+ Broadband Gateway.
You will now be able to access the Internet using your high-speed ADSL/2+ connection. The
Master series of ADSL2+ modems has the following major features.
Features
ADSL/2/2+ modem for high speed Internet access
USB Storage for Media share across your Local Network
Network Address Translation (NAT) and IP filtering functions to provide
network sharing and firewall protection for your computers
Easy configuration via a WEB browser
SPI firewall to protect you from outside intruders and attacks
TR-069 compliant for automatic modem update through your high speed
Internet access
This End User Manual will guide you through the installation and configuration of your M504
modem.
System Requirements
Before installing your M504 modem, make sure that you have the following:
ADSL service up and running on your telephone line, with at least one public Internet
address for your LAN
Computer containing an Ethernet 10Base-T/100Base-T network interface card (NIC)
For system configuration, use the web-based (HTTP) user interface.
Note: Make sure that your computer has a web browser such as Internet Explorer v7.0 or
later, or Firefox v3.0 or later.
Manual Ver1.0
- 5 -
2. Installation
In addition to this document, your M504 should arrive with the following:
One power adapter
One Ethernet cable with RJ-45 connector
One Telephone cable with RJ-11 connector
Product Installation CD
Installation Guide
Front Panel
The Front panel LED light indicates the status of the unit. (Left to Right)
M504
Label
Color
Function
Power
Green
On –Solid Green
Off –The Modem is Off
Red –Power on self test/ Device Malfunction (not
bootable) and device malfunction
Malfunction is any state which would prevent
syncing or passing of data
DSL
Green
Green –DSL Good Sync
Off - Powered off
Flashing Green - DSLAttempting sync
Internet
Green
Solid Green –IP connected –no traffic passing
Device has a public IP via either static/ DHCP/
or IPCP If PPP is used it has been authenticated
If IP or PPPOE session is idle and dropped,
light to remain green as long asADSL is still
present. Light to turn red if upon attempting
new session it fails.
Off –Modem Power Off.
LED Should remain off if modem is in bridged
mode
Ethernet 1-4
Green
Off - Power Off –or –No Device Detected on any LAN
port
Solid Green –Device connected including wake on LAN
on any LAN port
Flashing Green –LAN activity present
DLNA
Green
Green –USB storage connected
Off - No device detected
Manual Ver1.0
- 6 -
Rear Panel
The connectors located at the rear panel have the following functions.
M504
Interface
Function
Switch(Push Button)
Power switch on/off
Power
Connects to the power adapter cable
Reset Button
Resets unit’s configuration to factory default
DLNA
USB 2.0/1.1 connection: Connects external storage
device to gateway
Ethernet 1-4
RJ-45 connector: Connects to your PC’s Ethernet port,
or to the uplink port on your LAN’s hub/switch
ADSL
RJ-11 connector: Connects to your ADSLline
Connecting the Hardware
Connect the M504 to the phone jack, the power outlet, and your computer or network.
WARNING
Before you begin, turn the power off for all devices. These include your
computer(s), your LAN hub/switch (if applicable), and the M504.
Step 1. Connect theADSLcable and optional telephone
Connect one end of the phone cable to the RJ-11 connector on the rear panel of the M504. Connect
the other end to the ADSL outlet provided by your service provider (normally MODEM port of the
included splitter).
Step 2. Connect the Ethernet cable
Connect one end of the Ethernet cable to the RJ-45 connectors on the rear panel of the M504 and
connect the other end to your PCs network adaptor (NIC). If you are connecting a LAN to the
Master series, attach one end of the Ethernet cable to a regular hub port and the other end to the
LAN port on the M504.
Step 3.Attach the power connector
Connect the AC power adapter to the power connector on the M504 and plug in the adapter to a
Manual Ver1.0
- 7 -
wall outlet or power extension.
Step 4. Turn on the M504 and power up your systems
Press the Power switch on the back panel of the M504 to the ON position.
Boot up your computer(s) and any LAN devices such as hubs or switches.
Step 5. Configure the M504 through the WEB interface
Please refer to Chapter 3.
Step 6. Save the configurations and Reboot
Save the changes you made on the M504 and it will automatically reboot to make the settings
permanent.
Manual Ver1.0
- 8 -
3. Configuration
3.1 - Setup
Connect your M504 and PC with an RJ-45 Ethernet cable.
Turn on the M504.
The default IP address of M504 is 192.168.1.254.
3.2 - Establish the Connection
Enter the IP address (default: 192.168.1.254) of M504 in the address line of your
web browser.
A Dialogue Box will pop up to request the user to login. (Figure 1)
Figure 1. Login dialogue box
Please enter the management username/password into the fields then click on the
OK button (Please contact your ISP for login information).
Manual Ver1.0
- 9 -
4. Quick View
Quick View allows you to view all the major statistics and information of your VisionNet M504
Gateway from one easy location on the WEB interface.
The following information is provided:
1. Device Info –Information such as Software revision and Driver version
2. DSL Status –Sync Rate (DSL Connection speed for Downstream and Upstream)
3. WAN Overview –WAN service information
4. ARP –Client connected to the VisionNet M504 Gateway
Manual Ver1.0
- 10 -
5. LAN
The LAN (Local Area Network) section allows the following settings to be configured
on the VisionNet M504 Gateway:
LAN Setup
IPv6 LAN Settings
5.1 - LAN
Input the IPAddress and Subnet Mask of your M504. (Default: 192.168.1..254)
Check the box if you want to enable IGMP Snooping.
Disable/Enable DHCP Server, and change the starting and ending IP address of your
server pool if needed.
Altri manuali per M504
2
Indice
Altri manuali VisionNet Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
