VisionNet M505N Manuale utente
Product Manual
Model: M504 / M505N R3
Product Description: Broadband Gateway
W N: DSL2+ / Ethernet W N
Ethernet: Qty 4 - 10/100 Ethernet
USB: 2.0 (Media Share / Wireless Uplink)
WiFi: 802.11 b/g/n 2T2R 2.4Ghz with Internal irgain ntenna
Manual Version: 0.1c
Manual Date: July 2014
VisionNet M504 / M505N R3 Page 1 of 62 User Manual Rev 0.1c
Table of Contents
SECTION 1: M N GEMENT CCESS
1.1 UNDERSTANDING YOUR DOCUMENTATION 6
1.2 MANAGEMENT ACCOUNTS 7
1.3 SERVICE SECURITY CONSIDERATIONS 8
1.4 GUI ACCESS 9
1.5 CLI ACCESS 10
SECTION 2: W N CONFIGUR TION
2.1 WAN LOGIC OVERVIEW 11
2.2 X DSL LOGIC 14
2.3 CUSTOMIZING X DSL ARAMETERS 16
2.4 DEFINING HYSICAL WAN ORT O ERATION 17
2.5 CREATING AN ATM INTERFACE 18
2.6 CREATING A TM INTERFACE 20
2.7 CREATING AN ETHERNET INTERFACE 21
2.8 CREATE/MODIFY A BRIDGED WAN SERVICE 22
2.9 CREATE/MODIFY AN I OE WAN SERVICE 24
2.10 CREATE/MODIFY A WAN SERVICE 28
SECTION 3: QU LITY OF SERVICE
3.1 QUALITY OF SERVICE ENABLE/DISABLE 32
3.2 INTERFACE CONFIGURATION 33
3.3 QOS CLASSIFICATION TABLE 34
SECTION 4: SERVICE GROUPS
4.1 SERVICE GROU LOGIC 35
4.2 SERVICE GROU CREATION 36
SECTION 5: IPv4 L N CONFIGUR TION
5.1 I v4 CONFIGURATION 37
5.2 IGM MULTICAST 38
SECTION 6: IPv4 ROUTE CONFIGUR TION
6.1 GATEWAY RIORITIZATION 39
VisionNet M504 / M505N R3 Page 2 of 62 User Manual Rev 0.1c
6.2 STATIC ROUTE TABLE 40
6.3 OLICY ROUTE TABLE 41
SECTION 7: IPv4 DNS CONFIGUR TION
7.1 GLOBAL DNS RIORITIZATION 42
7.2 STATICALLY ASSIGNED GLOBAL DNS 43
SECTION 8: IPv4 N T TR VERS L
8.1 U n 42
8.2 MULTI-NAT 43
8.3 ORT FORWARDING 46
8.4 ORT TRIGGERING 47
8.5 DMZ HOSTS 48
8.6 NAT TRAVERSAL ALGORITHM 49
SECTION 9: WIFI CONFIGUR TION
9.1 ENABLE/DISABLE WIFI 50
9.2 CONFIGURE SSID S ECIFIC SETTINGS 51
9.3 WIFI SECURITY 52
9.4 WIFI RADIO SETTINGS 53
SECTION 10: PRODUCT SPECIFIC TION
10.1 RODUCT S ECIFICATION 54
10.2 RODUCT DE ICTION 55
10.3 LED FUNCTIONALITY 56
10.4 REGULATORY ADVISORIES 57
10.5 M504 / M505N DISTINCTIONS 60
10.6 OUI / MAC ADDRESS ALLOCATIONS 61
VisionNet M504 / M505N R3 Page 3 of 62 User Manual Rev 0.1c
This page intentionally left blank
VisionNet M504 / M505N R3 Page 4 of 62 User Manual Rev 0.1c
This page intentionally left blank
VisionNet M504 / M505N R3 Page 5 of 62 User Manual Rev 0.1c
SECTION 1: MANAGEMENT ACCESS
SECTION 1.1 UNDERSTANDING YOUR DOCUMENTATION
Item 1 Obtaining the most recent documentation from your VisionNet Sales Engineer
Only pre-approved ILEC/CLEC representatives may receive documentation . If you are not recognized on that list,
please ask the authorized company representative to add you to our list.
Item 2 You will receive the following files:
Configuration File This is the generic xml file, used at the time of customization,
sans device unique parameters
Customer Configuration Form
This is the explanatory form that summarizes the contents of the
configuration, and includes passwords in plain-text.
This form should only be distributed to authorized employees
Optional: Logo The VisionNet Logo may be replaced by a custom .png or gif file
Optional: DNS Redirect Branding
The custom DNS Redirect, used for DSL Sync and
Troubleshooting, may be over-written with a custom html file
including contact information and instructions.
Item 3 Types of configurations kept for records:
Shipping Configurations
These configurations are approved for shipping, and may be
referenced by Os, for use. Shipping configuration changes
must be requested by authorized technical representatives
lternate Configurations
These configurations are not used for shipping, but are
recognized as approved for deployment. These may be provided
to technicians upon request.
Testing Configurations
These configurations are not used for shipping, or recognized for
deployment. They are for testing, development, or are being
considered for final approval.
VisionNet M504 / M505N R3 Page 6 of 62 User Manual Rev 0.1c
SECTION 1.2 MANAGEMENT ACCOUNTS
Item 1 Management ccounts
It has been common practice, in the past, for in-field technicians, and lower level remote support, to receive full
admin access.
As of “Solution Suite 3” , 5 accounts are utilized for department appropriate access to VisionNet modems.
Item 2 Security dvisory
Strict adherence to the following account access restrictions is advised:
High Level ccess Limited to Engineering and NOC departments
Medium Level ccess Limited to in-field technicians and IS employed customer
support
Low Level ccess ONLY THIS LEVEL ACCESS SHOULD BE ROVIDED TO END
USERS
Item 3 Types of configurations kept for records:
ccess ccount Name GUI Privilege CLI Privilege
Local engineering High High
Local technician Medium Medium
Local enduser Low None
Remote networkops High High
Remote techsupport Medium Medium
VisionNet M504 / M505N R3 Page 7 of 62 User Manual Rev 0.1c
SECTION 1.3 SERVICE SECURITY CONSIDERATIONS
Item 1 Default use of Non-Standard Ports
Use of Non-Standard ports help ensure consistency in an environment where U n , and customer port forwarding,
may re-map standard ports for personal use.
The following ports are used as VisionNet defaults:
Service L N Port / Status W N Port - Status
HTT 80 - Enabled 6080 - Enabled
TELNET 23 - Enabled 6023 - Disabled
SSH 22 - Enabled 6022 - Enabled
FT 21 - Disabled 21 - Disabled
TFT 69 - Enabled 69 - Disabled
ICM N/A - Enabled N/A - Enabled
SNM 161 - Disabled 161 - Disabled
SAMBA 445 - Enabled N/A
Item 2 W N Interface Restrictions
Dedicated PVC / VL Ns are an effective method of isolating management services to privately managed
networks; thus removing potential security threats.
IP based CLs are suggested for public facing W N services.
VisionNet M504 / M505N R3 Page of 62 User Manual Rev 0.1c
SECTION 1.4 GUI ACCESS
STEP 1 Verify IP Information
1.A Determine the I and ort of the service
interface.
If you are accessing the unit remotely:
Determine the WAN I and Service ort.
Verify that your local I will not be blocked by any
gateway, or network, ACLs.
If you are accessing the unit locally:
Determine the LAN I of the gateway.
In a NAT, or Routed configuration, this will be your
Gateway I , assigned by DHC .
In a Bridged configuration, you will need to statically
assign an I , to your device, within the same subnet
as the gateway’s unadvertised LAN I .
Step 2 Connect via Web Browser
2.A In your browser’s address bar, enter the I
Address and, if remote, port number used for
access.
Example of W N ccess:
http://172.20.100.18:6080
Example of L N ccess:
http://192.168.6.1
2.B When Challenged, enter the username and
password associated with your account.
VisionNet M504 / M505N R3 Page 9 of 62 User Manual Rev 0.1c
SECTION 1.5 CLI ACCESS
STEP 1 Verify IP Information
1.A Determine the I and ort of the service
interface.
If you are accessing the unit remotely:
Determine the WAN I and Service ort.
Verify that your local I will not be blocked by any
gateway, or network, ACLs.
If you are accessing the unit locally:
Determine the LAN I of the gateway.
In a NAT, or Routed configuration, this will be your
Gateway I , assigned by DHC .
In a Bridged configuration, you will need to statically
assign an I , to your device, within the same subnet
as the gateway’s unadvertised LAN I .
Step 2 Connect via Client
2.A Via your OS Terminal, or Console rogram,
you may enter the I and ort information
Example of W N ccess:
172.20.100.18 port 6022
Example of L N ccess:
192.168.6.1 port 22
2.B When Challenged, enter the username and
password associated with your account.
VisionNet M504 / M505N R3 Page 10 of 62 User Manual Rev 0.1c
Altri manuali per M505N
4
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali VisionNet Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
