Volt Belladonna LED Path/Area Manuale utente

VOLT®Low Voltage Landscape Lighting

Belladonna LED Path/Area

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

VOLT®Belladonna LED Path/Area

VL-1024

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

This xture is intended for installation in accordance with local codes and

the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation, oper-

ation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing

this xture.

2. Warning: this xture is not intended to be installed within 10 feet [3

meters] of a pool, spa or fountain.

3. This xture is intended to be used only with a power supply (trans-

former) rated maximum of 50 watts (25 AMPS) at 12 volts.

4. Underground Low Energy Cable must not be buried over 6” (15.2 cm)

in order to connect to the main low voltage cable.

5. Wiring connections must be made with wire connectors that is suitable

for outdoor use.

6. Position the wire connector so that it is located within 6 inches (15.2

cm) from a building structure, a luminaire, or tting.

www.voltlighting.com

Important Safety Instructions

LIGHTED LAMP IS HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before reducing lamp.

2. Lamp gets HOT quickly!

3. Do not touch the hot lens, guard or cowl.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time.

6. Use a soft cloth.

7. Oil from skin may damage lamp.

8. Do not operate the xture with a damaged or missing lens or shield.

Package Contents

Product Dimensions

A. (1) Fixture Body

B. (1) LED Bulb

customersupport@voltlighting.com • 813.978.3700

11.25”

8”

3.5”

26.5”

C. (1) Diuser

Parts Required

A. (1) Stake (Sold Separately) B. (1) Base (Sold Separately)

Install Stake

Determine desired location for mounting

xture. Hammer stake into ground until

ange of stake is ush to grade. To avoid

damage to stake, place a board on top of

stake while hammering.

NOTE: If ground is hard and stake is dicult

to install, make a crosscut in ground using a

at shovel.

Board

Stake (Sold

Separately)

Soil

Ground

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT®Belladonna LED Path/Area

VL-1024

Install Fixture Body to Stake

Clear away area in ground at wireway

slot in top of stake. Align the wireway

slots on base and stake. Lay luminaire

pigtail into wireway slots and thread

the nipple at the bottom end of the

xture body into stake. Tighten until

snug to secure base.

Wire Connection

Fixture Body

Base

Stake

Pigtail

Wireway Slot

Strip two leads from luminaire pigtail. Using two wire connectors (not

provided), connect leads from luminaire to main supply cable leads.

Pigtail

Main Supply Cable

Wire Connectors

Install Bulb

Install Diuser

Insert bulb with correct wattage and

type marked on xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle bulb.

Remove screws from the shade. Attach

the diuser onto the shade and secure

with the screws previously removed.

customersupport@voltlighting.com • 813.978.3700

Socket

Shade

Bulb

Diffuser

Screw

Install/Replace Bulb

Please reverse Step 5 - Step 4 to expose the Bulb and replace it with correct

wattage and type marked on xture label. Reinstall Diuser.

IMPORTANT: LED Bulb must be protected from moisture and dust at all

times. Always re-install diuser when moved.

IS-VL1024.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Indice

Altri manuali Volt Illuminazione del paesaggio

Volt

Volt VAL-1811-40-BBZ Manuale utente

Volt

Volt 310 Series Manuale utente

Volt

Volt VWL-705-BBZ Manuale utente

Volt

Volt VAL-2103-0-BBZ Manuale utente

Volt

Volt VAL-2002 Manuale utente

Volt

Volt VPL-3025 Series Manuale utente

Volt

Volt VPL-1012-4-BBZ Manuale utente

Volt

Volt VAL-1052-BBZ Manuale utente

Volt

Volt VPL-1011-4-BBZ Manuale utente

Volt

Volt VHS-605-4-FPG Manuale utente

Volt

Volt VWL-703 Manuale utente

Volt

Volt VFL-4601-4-BBZ Manuale utente

Volt

Volt 510 Series Manuale utente

Volt

Volt VAL-2044-L-ABK Manuale utente

Volt

Volt VPL-1050-4-BBZ Manuale utente

Volt

Volt VSDL-6013-BBZ Manuale utente

Volt

Volt 3602 Series Manuale utente

Volt

Volt VHS-67 Series Manuale utente

Volt

Volt VAL-1004-4-BBZ Manuale utente

Volt

Volt Atom Mini VAL-2009-4-BBZ Manuale utente

Volt

Volt VAL-2102-0-BBZ Manuale utente

Volt

Volt VDL-6009-4-BBZ Manuale utente

Volt

Volt VWL-705 Manuale utente

Volt

Volt VSM-2407 Manuale utente

Manuali Illuminazione del paesaggio popolari di altre marche

Intex

Intex SL1006 Manuale utente

LED Group

LED Group ROBUS R2IN13W Manuale utente

Patriot Lighting

Patriot Lighting 343-1484 Manuale utente

Hess

Hess SERA G: SERA S Manuale utente

LIGMAN

LIGMAN JET 44 Manuale utente

LIGMAN

LIGMAN MALTA 1 Manuale utente

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuale utente

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuale utente

Saxby Lighting

Saxby Lighting Islay 68784 Manuale

LIGMAN

LIGMAN EU-10016-3 Manuale utente

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuale utente

LIGMAN

LIGMAN KI-60475 Manuale utente

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuale utente

Malibu Boats

Malibu Boats CL905K Manuale utente

LIGMAN

LIGMAN NYB-30161 Manuale utente

LIGMAN

LIGMAN SI-80021 Manuale utente

Malibu Boats

Malibu Boats CM110P Manuale utente

U.S.T.E.

U.S.T.E. VISTA 8202 Manuale utente