Wasp WLS8600 Manuale utente

WLS8600

Quick Reference Guide

Wasp Barcode Technologies

1400 10th Street

Plano, Texas USA 75074

Tel. 214-547-4100

Tel. 214-547-4101

provided under license).

Patents

This product may be covered by one or more of the following patents:

Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK

0602013.5M001; HK 0602013.5M002; JP 1305693; KR 30-0460940; US

D570,843 S; USD588,596 S.

US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2;

7,387,246 B2; 5,367,151; 5,449,893; 5,545,889; 6,098,877; 6,220,514 B1;

6,412,698 B2; 6,607,132 B1; 6,817,529 B2; 6,834,805 B2; 7,948,214 B2.

European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1;

1,396,811 B1; 1,413,971 B1; 1,816,585 B1; 1,942,442 B1.

Additional patents pending.

Table of Contents

Updates and Language Availability ..............................................................................1

Using the WLS8600 .............................................................................................................2

Aiming System ...........................................................................................................2

Setting Up the Reader ........................................................................................................3

Connecting the Cable .............................................................................................3

Connecting to the Host Interface ........................................................................4

Selecting the Interface Type ............................................................................................5

Interface Selection ....................................................................................................5

Keyboard Nationality ...............................................................................................7

PowerScan™ M8300 Default Configuration ...............................................................9

Programming .....................................................................................................................10

Restore Default .......................................................................................................10

Data Format Terminators ....................................................................................10

Operating Test ........................................................................................................10

Technical Features ............................................................................................................11

Default Values ....................................................................................................................12

Compliance .........................................................................................................................13

Laser Safety Compliance .....................................................................................13

LED CLASS ................................................................................................................14

CE Compliance ........................................................................................................14

FCC Compliance .....................................................................................................14

Power Supply ..........................................................................................................14

Wasp Barcode Technologies Limited Factory Warranty ..........................15

Service and Support ........................................................................................................16

NOTES

Quick Reference Guide 1

Updates and Language Availability

UK/US

The latest drivers and documentation updates for this product are available.

Contact WASP Technical Support.

Gli ultimi driver e aggiornamenti della documentazione per questo prodotto sono

disponibili.

Contattare WASP supporto tecnico.

Les derniers pilotes et mises à jour de documentation pour ce produit sont

disponibles.

Contactez le support technique WASP.

Die neuesten Treiber und Dokumentation Updates für dieses Produkt verfügbar sind.

Kontakt WASP Technical Support.

Los últimos controladores y actualizaciones de la documentación para este producto

están disponibles.

Póngase en contacto con soporte técnico de WASP.

Quick Reference Guide 2

WLS8600

Using the WLS8600

WLS8600 readers automatically scan barcodes at a distance. Simply aim and pull

the trigger. Code scanning is performed along the scan line emitted from the read-

ing window. This line must cross the entire code. The best reading angles are indi-

cated in the figure below.:

Aiming System

The WLS8600 provides an aiming system. If enabled, a partial trigger press pro-

duces a red spot, which should be aimed over the code center to get the best reading

performance, see figure (1) above. By completely pressing the trigger the scan line

appears to start code scanning (2).

After setting up the reader, you can enable or disable the aiming system by reading

the codes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Enable Aiming System

Ì$+Bj1$-'Î

Setting Up the Reader

Quick Reference Guide 3

Setting Up the Reader

Follow the steps below to connect and get your reader up and communicating with

its host.

1. Connect the Cable to the reader and the Host.

2. Configure the Interface (see page 5).

3. Program the Reader starting on page 10 (optional, as needed).

Connecting the Cable

A. Rubber gasket

B. Plastic boot

C. Cable spacer

D. Cover

E. Strain relief

1. Slip the cover over the cable.

2. Push the plastic boot into the rub-

ber gasket. Take care that the tab

on the plastic boot is aligned with

the notch in the rubber gasket.

3. Push the plastic boot and gasket

into the handle. Ensure that the

“Front” marking on the plastic

boot is facing out, with the arrow

pointing towards the front of the

scanner.

4. Insert the cable into the socket of

the plastic boot.

5. Insert the cable spacer into the

cable wire and slide it towards the

handle.

6. Push the cover along the cable

towards the reader, and hook it

over the yellow “tooth”.

7. Insert the strain relief into the

cover and tighten the screw to fix

the whole assembly to the reader

handle.

Align

Notch

Tab

Arrow

Setting Up the Reader

4WLS8600

Connecting to the Host Interface

USB

WEDGE

RS-232

PEN

Selecting the Interface Type

Quick Reference Guide 5

Selecting the Interface Type

Upon completing the physical connection between the reader and its host, proceed

directly to Interface Selection below for information and programming for the in-

terface type the reader is connected to (for example: RS-232, Keyboard Wedge,

USB, etc.) and scan the appropriate barcode to select your system’s correct interface

type.

Interface Selection

Select one of the interface codes according to your application.

USB Interface Selection

* When configuring USB-COM, the relevant files and drivers must be installed from the USB

Device Installation software. Contact Wasp Technical Support for information.

USB-KBD

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Hand Held

Ì$+UA01$-.Î

USB-IBM Table top

Ì$+UA00$-(Î

USB KBD-APPLE

Ì$+UA05$-FÎ

Selecting the Interface Type

6WLS8600

Pen Emulation Interface Selection

RS-232 Interface Selection

Wedge Interface Selection

The Interface for IBM XT and IBM Terminals 3151, 347X and 348X can be se-

lected from the WLS8600 Reference Manual available online at www.waspbar-

code.com

PEN

Ì$+CP6$-BÎ

RS-232 Standard

Ì$+CP0$-$Î

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

Wedge IBM AT or PS/2 PCs

Ì$+CP500$-aÎ

PC Notebook

Ì$+CP505$-ÈÎ

PC Notebook - ALT mode

Ì$+CP508$-2Î

IBM AT - ALT mode

Ì$+CP507$-+Î

Altri manuali per WLS8600

Indice

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente