WEEDO F192 Manuale utente
USER MANUAL
3D PRINTER
C
ONTENTS
1.ATTENTIONS
1.1 ABOUT THE INSTRUCTION BOOK
1.2 SAFETY ATTENTIONS
1.3 PRINTING CONSUMABLE ITEMS
1.4 ENVIRONMENTAL REQUIREMENTS
2.PRINTER BRIEF INTRODUCTION
2.1 APPEARANCE INTRODUCTION
2.2 TECHNICAL PARAMETERS
3. INSTALLATION OF SOFTWARE
3.1. INSTALL PYTHON
3.2. THE INSTALLATION OF REPLICATORG AYCE SPECIAL USE VERSION
3.3. THE INSTALLATION OF CURA AYCE SPECIAL USEVERSION
4. PRINT THE FIRST MODEL
4.1. LINKED WITH POWER SUPPLY
4.2. ASSEMBLY OF FILAMENT
4.3. PRINTING PREPARATION
4.4. PRINTING MODEL
4.5. REMOVING MODEL
5. SOFTWARE DETAILED INTRODUCTION
5.1. CURA SOFTWARE INTRODUCTION
5.2. REPLICATORG SOFTWARE INTRODUCTION
6. PERATION PANEL SETTING
6.1. OPERATION PANEL INTRODUCTION
6.2. THE COMMON OPERATION ON THE OPERATION PANEL
6.3. THE PRINT SEETTINGS FOR DUAL-EXTRUDER PRINTER
7.REGULAR REPAIR AND MAINTANCE
7.1. PRINTER DAILY MAINTENANCE GUIDE
7.2. PRINTING EXTRUDER MAINTENANCE AND REPLACEMENT
8. FREQUENTLY ASKED QUESTIONS AND TROUBLESHOOTING(FAQ)
2
2
2
3
3
4
4
6
7
7
8
9
12
12
13
14
15
15
16
16
25
32
32
33
38
41
41
46
49
CO
NTENT
S
1 2 GB
1. ATTENTIONS
1.1 About the instruction book
This instruction book contains 3D printer’s installation, use, maintenance, common
problems and other important information. Please read this instruction book
carefully before use 3D printer. For 3D printer damage and other damages caused
by violation of safety matters and operation procedures given in the instruction
book, it will be borne by the user.
1.2 Safety Attentions
1. In the printing or just after printing of 3D printers, as nozzle temperature reach
up to 200°C, it is forbidden to touch the printing head directly at this moment.
2. 3D printer is equipped with active air filtration system; it can handle the most
irritating gases emitted after heating of filaments in printing. But if printing is
needed for long time, please use the printer under the well-ventilated environment.
3. As 3D printer is complicated for its structure, if there is fault, please refer to the
instruction book to eliminate the faults. If the fault still can’t be solved, please
contact the after-sales department of company. To the printer maintained by user
without authorization, the company would not guarantee maintenance.
4. As 3D printer is equipped with high voltage inside, it is forbidden to disassemble
the printer by the non-professional staff. To any consequence caused by violation of
this matter, it would be borne by users.
5. Please use the power cable (4) and Print cable (3) provided by company. Any
printer failure and other consequences caused by using the power cable (4) and
Print cable (3) provided by third parties , it would be borne by user.
6. There is no memory function of 3D printer, when the 3D printer begin to print
model must to Remain energized.
7. When the printer is connected to ReplicatorG software to print, avoiding
computer appears hibernation, Otherwise, Printing is interrupted.
8. The socket-outlet shall be installed near the equipment and shall be easily
accessible
1.3 Printing Consumable Items
Use the printer, please use the printing consumable items provided by the
company. The printing consumable sold in the retail market is of different
specifications and quality levels, it is very easy to block the printer nozzle and
damage the nozzle and electrical machine. For the printer faults caused by use the
consumables of third party, our company would not guarantee to repair.
1.4 Environmental Requirements
The 3D printer is applied with fully enclosed structure, strongly adaptive to the
environment temperature, and can work normally in the 5℃to 40℃environment.
If the environment temperature exceeds this range, the printing quality of finished
product will be dropped accordingly.
After the printing consumables opened with its package, if they are not used for a
long time, please seal it by sealed package. Especially to the PLA consumables, it
would absorb the moisture in the air to affect the quality of printing finished
products after long time exposure to air.
8
.
The socket-outlet shall be
i
nst
3 4 GB
2. PRINTER BRIEF INTRODUCTION
The printer is applied with FDM (Fused Deposition Modelin) theory, which performs
the slicing conversion for the STL 3D model, and then prints out the real finished
product one by one. The printer is of metal frame, fully closed structure, removable
printing platform, active air filtration system and one series of innovative design,
and is characterized of high printing speed, high quality finished products, easy
maintenance, and high-intensity continuous printing.
2.1 Appearance Introduction
The Front View of Printer
༃
༄
༅
༆༇༈
༊
༉
༃Up Cover
༄Front Decorative Panel
༅Left Side Door
༆Power Switch
༇Touch Screen
༈Front door
༉
Acrylic Platform
༊
Filament Hold
༉
༉
The Right View and Back View of Printer
༃Right Side Door ༄SD Card (7) Socket
༅USB Line Socket
༆
Power Socket
༇
Chassis Fan
༈Air Filtration Fan
Filament External Entreance
༃
༄༅ ༆༇
༈
༃
U
p
C
o
v
e
r
5 6 GB
2.2 Technical Parameters
Printing Parameters Machine Parameters
280 *200*200 mm Display Screen Model English/German/F
rench/Italian
Layer Thickness
0,1 ~ 0,5 mm 490 * 450 * 510mm
Nozzle Diameter 0,4 mm Machine Weight 25 kg
Machine Color Black 230 V ~ 50HZ，2A
Printing Speed 20 ~ 150 mm/s
Positional
Accuracy
Z axis 0.00125mm
XY axis 0.011mm
Filtration System Three Layers of
Mesh Filter
Consumable Parameters Software Parameters
Consumable
Type
PLA/PLA Pro/
PVA /ABS
Printing
Software
Cura WEEDO Version/
ReplicatorG WEEDO
Consumable
Diameter 1,75 mm STL/GCODE/OBJ
Consumable color Optional for
multi-colors Windows/Linux/IOS
Printing
Method USB/SD Card (7)
Machine Size
Power Input
File Format
Operating
System
Print Size
Nozzle Number
2
11
1
Notes: 1:Special needs
*2 *2
3.INSTALLATION OF PRINTING SOFTWARE
3.1. Install Python
Python is an object-oriented、literal-style computer programming language.
ReplicatorG slicing software (skeinforge) is written in Python language. And so
Python must be installed before installing ReplicatorG software,Otherwise,
ReplicatorG software can not start .Open the CD (14) or go to official website to
download the installation package(www.ayce.ch). Runing the python-2.7.6.exe,
execute the installer and follow the directions to install the software. Please choose
the defaultpath as the Destination Directory, otherwise the following ReplicatorG
software could not find the library path.
Software Type Software usage
Weedo _V44EN.exe
(ReplicatorG)
Thisprogramisusedtotransfer"gcode"and"x3g"file
to"stl"file.Whenthe3Dprinterconnectedtocomputer
by a digital wire, youcanuseReplicaterGtocontrolthe
printingfromcomputer.
Python _ 2.7.6.msi Python is a must program for ReplicatorG, and it makes
ReplicatorG can achieve model data format conversion.
Cura _WeedoV1.2.5.exe
Cura is an open source software. It can be used to slice
3D Model.
3 INSTALLATION OF PRIN
T
7 8 GB
Choose the default option to install all the features.
Run the software installation package from CD (14), WEEDO_V42.4_EN, in the
installation wizard window, click “next”→“I Agree” to continue. In the window of
selection installation path window, please use the program default route.
After the installation is complete, click Finish to exit。
3.2. The Installation of ReplicatorG WEEDO Special Use Version
When the print driver installation screen pops up, click "Next" to continue. After the
printer driver installation is complete, click "Finish" to exit.
After the software installation is complete, click "Finish" to exit.
3.3. The Installation of Cura Special Use Version
Run the software installation package from CD (14), Cura-14.07-WEEDO, in the
installation wizard window, click “install”→“Next”→“Finish”. In the window of
selection installation path window, please use the program default route.
When the print driver installation scr
Indice
Altri manuali WEEDO Stampante 3D
