WhatsGPS S288G Manuale utente
User Manual
S288G
3G
(GPS+GPRS+GSM)
1、Product Introduction
288G GPRS/GSM type GPS intelligent terminal
(mobile user terminal) has built-in industrial grade
GPRS/GSM communication module and the latest
high-receiving sensitivity GPS positioning module. It
adopts GPRS and SMS dual-mode communication
mode. The terminal runs stably, reliably and fully
functions. There are many interfaces, which can be
applied to different fields such as leasing, mortgage,
electric car, etc., and can also be customized
according to different industries and different user
needs.
2、Main features
1、Device has a small form factor, a built-in GPS
antenna and a GSM antenna, and is easy to install;
2、Support UDP/TCP communication;
3、Support SMS parameter setting function and
query function;
4、Support low power mode;
5、Support GPS data timing upload and naming
function;
6、Support base station assisted positioning function;
7、Support remote power off and power off function;
8、Support SMS power off and power off function;
9、Support serial port upgrade function;
10、Support blind zone data refill function;
11、Support power off alarm function;
12、 Supports overspeed alarm function;
13、Support mileage statistics function;
14、Support SMS alarm notification function;
15、Support SOS alarm function;
16、 Support fatigue driving alarm function;
17、Supports GEO-fence in and out alarm functions;
18、Support timeout parking alarm function
19、Support mobile phone wap real-time car search,
direct google map display;
3、Detailed Specification
Parameter
Working voltage 8VDC ~ 55VDC
Working current 50mA ~ 160mA
GSM module Global
Protocol UDP/TCP（customization）
GPS module The latest TD chip
Others
GPS sensitivity -167dBm
GPS frequency L1，1575.42 MHz，1561.10MHz
Channel 64 channel
Position accuracy < 3M，2D RMS
Speed accuracy 0.1 M/S
Time accuracy Synchronous GPS time
Default data WGS-84
Re-acquire Average 0.1S
Hot Start Average 1S
Warm start Average 10S
Cold start Average 28S
Height limit 18,000m（60,000F）Max
Speed limit 515KM/S（1000 knots）Max
Acceleration limit 小于4g
Working temperature -20°~ 70°C
Storage temperature -30°~ 85°C
Device size 95mm × 50mm × 16mm
Temperature 5% ~ 95%
Built-in battery Less than 1 hours
4、Interface definition
4.1、Power cable
Pic:
Pin description:
1.Power port
Pin
1
2
3
Color
Red
Black
Yellow ACC;
Functions/Wiring method
The power input is positive, the working voltage is 8VDC
~50VDC, and the positive of the car battery is connected;
The power input is negative, and the negative of the car
battery is connected; (If the relay needs to be connected,
it is connected to the negative terminal of the relay white
line)
2、Locking oil
3、咪头
Pin
1
2
Orange
Grey
1
2
Orange SOS+
SOS—Yellow
Color Functions
Pin Color Functions
Lock the oil circuit positive, connect the relay
yellow line
Lock the oil circuit negative, connect the relay
white wire
Note: There may be minor adjustments to different
batches of line color. Please refer to the actual
product line color.
Preparation and operation of intelligent terminal
before installation
Preparation before installation
1.Contact the relevant person in charge to open the
platform login user name and password.
2.Open the SIM card for GPRS data service. At the
same time, you must apply for a SIM package for
your SIM card. You can apply for 10M or 20M or 50M.
The minimum billing unit of the SIM card shall be in
bytes (BYTE). The traffic used by the device for
normal operation: 5~8M for 1 minute monitoring, 10~
12M for 30 seconds monitoring, and the flow rate unit
is byte.
3.Record the relevant vehicle information such as the
SIM card number and the vehicle license plate
number to be installed, and use the open user name
and password to log in to the online car or CS version
of the client software to add information about the
fleet, vehicle, etc. (Ps: system when loading The
number must be 15 digits starting with 860013, such
as: 860013512345678)
4.Before installing the GPS vehicle terminal on site,
connect the GPS vehicle terminal and the complete
set of accessories (the accessories to be installed to
the customer) in the indoor test environment, and
supply power to the GPS vehicle terminal with the s
tabilized power supply to ensure the GPS vehicle
terminal and all accessories. Can work normally.
4、Installation Precautions
4.1.Firstly check whether the vehicle power supply
voltage is normal and whether its voltage range
meets the power supply voltage range of the GPS
vehicle terminal. When selecting the power supply,
the power supply should try to select the main power
5、
supply of the vehicle (the power cable directly
connected to the battery);
4.2. When selecting the installation position of the
GPS vehicle terminal, try to keep away from the car
electronic equipment and other heat source devices,
especially the wireless equipment and high-power
electronic equipment, and install it firmly to avoid
damage to the GPS vehicle terminal due to long-term
large vibration;
4.3.The antenna is an all-weather product that can be
installed in a suitable position inside and outside the
car. Concealed installation is recommended to be
installed on the back of the front panel plastic cover,
the back of the trunk cover or other plastic products.
Note that the GPS antenna must have a certain visible
sky range, not by the metal casing, coated glass Etc.
4.4.Do not plug in the SIM card with power to avoid
burning the card.
Installation
5.1、Warm tips
The power cable is recommended to be connected
behind the car main switch or on the car battery line.
5.2、Installation steps and parameter settings:
①Disassemble the screws and insert the SIM card
into the SIM card holder on the circuit board. When
taking the circuit board, please be careful not to
touch the components on the circuit board as much
as possible to avoid static damage to the circuit
board.
②Turn on the backup battery switch. Under normal
conditions, the circuit board starts to charge and the
indicator light is on;
③Select the car power access point and connect the
external input power to the terminal;
④After the lights are flashing normally, you can start
the parameters of the SMS setting terminal. The
specific setting instructions are as follows:
SS,*CMNET*,**,**,*IP*,*port*,*device system number
*,*sim card number*,*123456*
*APN：Telecom carrier access address, such as
CMNET;
*PORT：server port;
*IMEI number：device ID，11-digit length number
starting with 13;
*SMS service number: The service short signal will
be applied when the terminal actively reports the
After-sales service
alarm. The national number must be added before
the number. For example, the domestic 13512345678
should be *+8613512345678*. The service SMS
number is the corresponding target number when
the SMS message service is opened.
*SMS verification password: The factory default is
123456, which must be 6 digits;
EG：
S,*CMNET*,*28.60.185.172*,*9999*,*13512345002*,
*+8613418776340*,*123456*
⑤After the terminal normally logs in to the platform,
install the circuit board into the outer casing, fix the
panel with screws, fix the terminal and antenna in the
proper position, and arrange the cable, restore the
car line and the removed part of the panel, and the
installation is basically completed.
Terminal remote restart command: R, *PASSWORD*
Time zone adjustment: Adjust_Time, time zone,
*PASSWORD*
Working interval setting: SET+TIME=T1, T2, *123456*
T1 indicates the ACC open transmission interval, and
T2 indicates the ACC open transmission interval.
Set the SMS response number above to send the
number of the SMS mobile phone.
Indice
Altri manuali WhatsGPS GPS
WhatsGPS
WhatsGPS S709 Manuale utente
WhatsGPS
WhatsGPS S102A Manuale utente
WhatsGPS
WhatsGPS S102 Manuale utente
WhatsGPS
WhatsGPS S5L Manuale utente
WhatsGPS
WhatsGPS S116mini Manuale utente
WhatsGPS
WhatsGPS S116mini Manuale utente
WhatsGPS
WhatsGPS S18 Manuale utente
WhatsGPS
WhatsGPS S100 Manuale utente
WhatsGPS
WhatsGPS W18L Manuale utente
WhatsGPS
WhatsGPS R11 Manuale utente
