WIKA Phase-Out PSD-3 Series Manuale utente
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
EN
DE
FR
ES
Druckschalter Typ PSD-3x
Pressure switch model PSD-30
Pressure switch model PSD-3x
Pressostat type PSD-3x
Presostato modelo PSD-3x
2WIKA operating instructions pressure switch, model PSD-3x
11430486.07 04/2015 EN/DE/FR/ES
EN
DE
FR
ES
Operating instructions model PSD-3x Page 3 - 32
Betriebsanleitung Typ PSD-3x Seite 33 - 62
Mode d'emploi type PSD-3x Page 63 - 92
Manual de instrucciones modelo PSD-3x Página 93 - 122
© 2010 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d'emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta posterior!
3WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
Contents
Contents
Declarations of conformity can be found online at www.wika.com.
1. General information 4
2. Safety 6
3. Specications 9
4. Design and function 18
5. Transport, packaging and storage 18
6. Commissioning, operation 19
7. Maintenance and cleaning 28
8. Faults 29
9. Dismounting, return and disposal 31
Appendix 1: EC Declaration of Conformity for model PSD-3x 32
4WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
1. General information
■
The pressure switch described in the operating instructions has been designed and manufactured
using state-of-the-art technology. All components are subject to stringent quality and environmental
criteria during production. Our management systems are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on handling the instrument.Working
safely requires that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations for the
instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the
instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions, prior to
beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product contrary
to its intended use, non-compliance with these operating instructions, assignment of insuciently
qualied skilled personnel or unauthorised modications to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PE 81.67
- Application consultant: Tel.: (+49) 9372/132-8976
E-mail: [email protected]
1. General information
5WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation which can result in serious injury or death if not
avoided.
CAUTION!
... indicates a potentially dangerous situation which can result in light injuries or damage to
the equipment or the environment if not avoided.
Information
… points out useful tips, recommendations and information for ecient and trouble-free
operation.
Abbreviations
U+Positive power terminal
U- Negative power terminal
S+Analogue output
SP1 Switch point 1
SP2 Switch point 2
C Communication with IO-Link
MBA Start of measuring range
MBE End of measuring range
1. General information
6WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate pressure
switch has been selected in terms of measuring range, design and specic measuring
conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
■
Open the connections only after the system has been depressurised.
■
Observe the working conditions in accordance with Chapter 3 "Specications".
■
Always operate the pressure switch within the overpressure safety range.
Further important safety instructions can be found in the individual chapters of these
operating instructions.
2.1 Intended use
The pressure switch is used to convert pressure into an electrical signal indoors and outdoors.
The instrument has been designed and built solely for the intended use described here, and may only
be used accordingly.
The technical specications contained in these operating instructions must be observed. Improper
handling or operation of the instrument outside of its technical specications requires the instrument to
be taken out of service immediately and inspected by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended
use.
2. Safety
7WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
2.2 Personnel qualication
WARNING!
Risk of injury if qualication is insucient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by skilled
personnel who have the qualications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience and knowledge of country-specic
regulations, current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3 Special hazards
WARNING!
For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids,
and refrigeration plants, compressors, etc., in addition to all standard regulations, the
appropriate existing codes or regulations must also be followed.
WARNING!
Residual media in dismounted pressure switches can result in a risk to persons, the
environment and equipment.
Take sucient precautionary measures.
2. Safety
8WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
2.4 Labelling / safety marks
Product label
If the serial number becomes illegible (e.g. due to mechanical damage or overpainting), traceability will
no longer be possible.
Explanation of symbols
General danger symbol
cULus, Underwriters Laboratories Inc.®
The instrument was inspected in accordance with the applicable US standards and certied
by UL.
Furthermore, instruments bearing this mark comply with the applicable Canadian
standards on safety.
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European directives.
2. Safety
Measuring range
Power supply
Analogue signal Switching output 1 Switching output 2
P# Product No.
S# Serial No.
9WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
3. Specications
3. Specications
3.1 Measuring ranges
Gauge pressure
bar 0 ... 1 1) 0 ... 1.6 1) 0 ... 2.5 0 ... 4 0 ... 6 0 ... 10 0 ... 16 0 ... 25
0 ... 40 0 ... 60 0 ... 100 0 ... 160 0 ... 250 0 ... 400 0 ... 600
psi 0 ... 15 1) 0 ... 25 1) 0 ... 301) 0 ... 50 0 ... 100 0 ... 160 0 ... 200 0 ... 300
0 ... 500 0 ... 1,000 0 ... 1,500 0 ... 2,000 0 ... 3,000 0 ... 5,000 0 ... 8,000
Absolute pressure
bar 0 ... 1 1) 0 ... 1.6 1) 0 ... 2.5 0 ... 4 0 ... 6 0 ... 10 0 ... 16 0 ... 25
psi 0 ... 15 1) 0 ... 25 1) 0 ... 30 1) 0 ... 50 0 ... 100 0 ... 160 0 ... 200 0 ... 300
Vacuum and +/- measuring range
bar -1 ... 0 1) -1 ... 0.6 1) -1 ... 1.5 -1 ... 3 -1 ... 5 -1 ... 9 -1 ... 15 -1 ... 24
psi -14.5 ... 0 -14.5 ... 15 -14.5 ... 30 -14.5 ... 50 -14.5 ... 100 -14.5 ... 160 -14.5 ... 200 -14.5 ... 300
The given measuring ranges are also available in kg/cm2and MPa.
1) Not available for PSD-31.
Overpressure limit
2 times
1.7 times for the relative pressure measuring ranges 160 psi, 1,000 psi and 1,500 psi
3.2 Display
14-segment LED, red, 4-digit, 9 mm character size
Display can be turned electronically through 180°
Update (adjustable): 100, 200, 500, 1,000 ms
10 WIKA operating instructions pressure switch, model PSD-3x
EN
11430486.07 04/2015 EN/DE/FR/ES
3. Specications
3.3 Output signals
Switching output 1 Switching output 2 Analogue signal
PNP - 4 ... 20 mA (3-wire)
PNP - DC 0 ... 10 V (3-wire)
PNP PNP -
PNP PNP 4 ... 20 mA (3-wire)
PNP PNP DC 0 ... 10 V (3-wire)
Alternatively also available with an NPN instead of a PNP switching output.
With the IO-Link option, switching output 1 is always PNP.
IO-Link, revision 1.1 (option)
IO-Link is optionally available for all output signals.
With the IO-Link option, switching output SP1 is always PNP.
Zero oset adjustment
maximum 3 % of span
Switching thresholds
Switch point 1 and switch point 2 are individually adjustable
Switching functions
Normally open, normally closed, window, hysteresis
Freely adjustable
Switching voltage
Power supply - 1 V
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali WIKA Interruttore
WIKA
WIKA PSM-700 Manuale utente
WIKA
WIKA APW SERIES Manuale utente
WIKA
WIKA EGS80 Series Manuale utente
WIKA
WIKA DC Series Manuale utente
WIKA
WIKA RLS-1000 Manuale utente
WIKA
WIKA RLS-7000 Manuale utente
WIKA
WIKA PSD-4 Manuale dell'operatore
WIKA
WIKA DW03 Series Manuale utente
WIKA
WIKA PS-600 Manuale utente
WIKA
WIKA LSD-30 Manuale utente
WIKA
WIKA mw series Manuale utente
WIKA
WIKA TFS135 Manuale utente
WIKA
WIKA PSD-4 Manuale utente
WIKA
WIKA PSD-4 Manuale utente
WIKA
WIKA OLS-C20 Manuale utente
WIKA
WIKA OLS-F1 Manuale utente
WIKA
WIKA TSD-30 Manuale utente
WIKA
WIKA FSM-6100 Manuale utente
WIKA
WIKA PSD-4-ECO Manuale utente
WIKA
WIKA TXS Series Manuale utente
