WIKA R-1 Manuale utente
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
EN
DE
FR
ES
Pressure transmitter, model R-1
Druckmessumformer, Typ R-1
Pressure transmitter, model R-1
Transmetteur de pression, type R-1
Transmisor de presión, modelo R-1
2WIKA operating instructions pressure transmitter, model R-1
EN
DE
FR
ES
14026284.02 09/2018 EN/DE/FR/ES
Operating instructions model R-1 Page 3 - 24
Betriebsanleitung Typ R-1 Seite 25 - 46
Mode d'emploi type R-1 Page 47 - 68
Manual de instrucciones modelo R-1 Página 69 - 91
© 2012 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d'emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
3WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
Contents
Contents
Declarations of conformity can be found online at www.wika.com.
1. General information 4
2. Safety 6
3. Specications 9
4. Design and function 15
5. Transport, packaging and storage 15
6. Commissioning, operation 16
7. Maintenance and cleaning 21
8. Faults 21
9. Dismounting, return and disposal 23
4WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
1. General information
1. General information
■
The pressure transmitter described in the operating instructions has been designed and
manufactured using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certied to ISO 9001 and
ISO 14001.
■
These operating instructions contain important information on handling the instrument.Working
safely requires that all safety instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and general safety regulations for the
instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the
instrument and readily accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood the operating instructions prior to
beginning any work.
■
The manufacturer's liability is void in the case of any damage caused by using the product contrary
to its intended use, non-compliance with these operating instructions, assignment of insuciently
qualied skilled personnel or unauthorised modications to the instrument.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PE 81.45
- Application consultant: Tel.: +49 9372/132-0
Fax: +49 9372/132-406
E-mail: info@wika.de
5WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
1. General information
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death, if not
avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage to the
equipment or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for ecient and trouble-free
operation.
Abbreviations
2-wire The two connection lines are used for the voltage supply.
The measurement signal also provides the supply current.
3-wire Two connection lines are used for the power supply.
One connection line is used for the measurement signal.
UBPositive power supply terminal
0V Negative power supply terminal
S+Positive output terminal
6WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
2. Safety
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate pressure
transmitter has been selected in terms of measuring range, design and specic measuring
conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
■
Open the connections only after the system has been depressurised.
■
Observe the working conditions in accordance with chapter 3 "Specications".
■
Always operate the pressure transmitter within the overpressure limit.
Further important safety instructions can be found in the individual chapters of these
operating instructions.
2.1 Intended use
The pressure transmitter is used to convert pressure into an electrical signal.
The instrument has been designed and built solely for the intended use described here, and may only
be used accordingly.
The technical specications contained in these operating instructions must be observed.
Improper handling or operation of the pressure transmitter outside of its technical specications requires
the instrument to be taken out of service immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
7WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
2. Safety
2.2 Personnel qualication
WARNING!
Risk of injury should qualication be insucient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by skilled
personnel who have the qualications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience and knowledge of country-specic
regulations, current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3 Special hazards
WARNING!
For hazardous media such as oxygen, acetylene, ammable or toxic gases or liquids,
and refrigeration plants, compressors, etc., in addition to all standard regulations, the
appropriate existing codes or regulations must also be followed.
WARNING!
Residual media in dismounted pressure transmitters can result in a risk to persons, the
environment and equipment.
Take sucient precautionary measures.
8WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
2. Safety
2.4 Labelling, safety marks
Product label
If the serial number and the 2D code become illegible due to mechanical damage or overpainting,
traceability will no longer be possible.
Explanation of symbols
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European directives.
cRUus, Underwriters Laboratories Inc.®
The instrument was inspected in accordance with the applicable US standards and
certied by UL. The UL Recognized Component Mark denotes components recognised
by UL that serve as a component of another product.
Output signal
Pin assignment
P# Product no.
S# Serial no.
Measuring range
9WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
3. Specications
3. Specications
3.1 Measuring ranges
Relative pressure
bar Measuring range 0 ... 6 0 ... 10 0 ... 15 0 ... 16 0 ... 20 0 ... 25 0 ... 30
Overpressure limit 20 20 32 32 50 50 80
Burst pressure 100 100 160 160 250 250 400
Measuring range 0 ... 35 0 ... 40 0 ... 45 0 ... 50 0 ... 60 0 ... 100 0 ... 160
Overpressure limit 80 80 120 120 120 200 320
Burst pressure 400 400 550 550 550 800 1,000
psi Measuring range 0 ... 100 0 ... 150 0 ... 200 0 ... 250 0 ... 300 0 ... 350 0 ... 400
Overpressure limit 290 290 460 460 720 720 720
Burst pressure 1,450 1,450 2,300 2,300 3,600 3,600 3,600
Measuring range 0 ... 450 0 ... 500 0 ... 550 0 ... 600 0 ... 650 0 ... 700 0 ... 750
Overpressure limit 1,100 1,100 1,100 1,100 1,100 1,700 1,700
Burst pressure 5,800 5,800 5,800 5,800 5,800 7,900 7,900
Measuring range 0 ... 800 0 ... 850 0 ... 1,500 0 ... 2,400
Overpressure limit 1,700 1,700 2,900 4,600
Burst pressure 7,900 7,900 11,600 14,500
10 WIKA operating instructions pressure transmitter, model R-1
14026284.02 09/2018 EN/DE/FR/ES
EN
3. Specications
Vacuum and +/- measuring range
bar Measuring range -1 ... +7 -1 ... +9 -1 ... +10 -1 ... +15
Overpressure limit 20 20 20 32
Burst pressure 100 100 100 160
Measuring range -1 ... +20 -1 ... +25 -1 ... +29 -1 ... +45
Overpressure limit 50 50 80 120
Burst pressure 250 250 400 550
Measuring range -0.5 ... +7 -0.5 ... +10
Overpressure limit 20 20
Burst pressure 100 100
psi Measuring range -30 inHg ... +100
-30
inHg
... +145 -30
inHg
... +200 -30
inHg
... +250
Overpressure limit 290 290 460 460
Burst pressure 1,450 1,450 2,300 2,300
Measuring range
-30
inHg
... +300 -30
inHg
... +350 -30
inHg
... +400 -30
inHg
... +450
Overpressure limit 720 720 1,100 1,100
Burst pressure 3,600 3,600 5,800 5,800
Measuring range
-30
inHg
... +500 -30
inHg
... +550 -30
inHg
... +600
Overpressure limit 1,100 1,100 1,700
Burst pressure 5,800 5,800 7,900
Other measuring ranges on request
Vacuum tightness
Yes
Indice
Lingue:
Altri manuali WIKA Trasmettitore
WIKA
WIKA E-11 Manuale utente
WIKA
WIKA IPT-2 Series Manuale utente
WIKA
WIKA S-20 Manuale utente
WIKA
WIKA F-20 Manuale utente
WIKA
WIKA HP-1 Manuale utente
WIKA
WIKA LH-20 Istruzioni per l'installazione
WIKA
WIKA T19.10 Manuale utente
WIKA
WIKA OBSOLETE DELTA-trans Manuale utente
WIKA
WIKA S-11 Manuale utente
WIKA
WIKA OC-1 Manuale utente
WIKA
WIKA SA-11 Manuale utente
WIKA
WIKA GD10 Manuale utente
WIKA
WIKA SA-11 Manuale utente
WIKA
WIKA CPT-2x series Manuale utente
WIKA
WIKA T53.10 Foglio di istruzioni
WIKA
WIKA CPT-2x series Manuale utente
WIKA
WIKA TIF11 Manuale utente
WIKA
WIKA IS-3 Manuale utente
WIKA
WIKA N-10 Manuale utente
WIKA
WIKA DMSU22SA Manuale utente
