Winix T1 Manuale utente
User Manual
xPlease read and follow all safety rules and instructions in
this manual before operating.
xThe product warranty is printed on the back of this guide,
so please keep it in a safe place for future use.
Model
Use & Care
Guide
2
English T1
CONTENTS
Set Up
Where to use 8
Installing the filters 9
Safety Instructions
Safety and Cautions 12
Operation
Initial Operation 13
Modes of Operation 14
Features and Settings 15
WINIX SMART Set Up 19
Care and Maintenance
Filter Care 22
Smart Sensor Care 27
Cleaning Care 28
Troubleshooting
Frequently Asked Questions 29
Unit Specifications 32
Product Warranty 33
English
1
Français
35
Español 69
Deutsche 103
Italiano 137
Nederlands 171
5-Stage Air Purification 3
Controls 4
XThis product is suitable for AC220 ~ 240V, 60Hz only.
3
English T1
5-STAGE AIR PURIFICATION
Product Instruction manual
PACKAGE CONTENTS
High Capacity
AOCTM Filter
Anti-microbial
PM 2.5 Filter
Fine Mesh
Pre-Filter
PlasmaWave®
True HEPA
Filter
Filter Set EU & UK Power Cords
4
English T1
KNOW THE
Full Colour LCD Touch
Screen
Air Outlet Vent
Light Sensor
Top cover
Filter cover
Top cover
release
Dust Sensor
Speaker
Odour Sensor
Air Intake Vent
5
English T1
Manual
Mode
PM 2.5 Dust
Level Indicator Sleep Mode
Indicator
Timer Indicator Auto Mode
Wi-Fi
Connection
Indicator
Local Climate
and Weather
Information PlasmaWave®
Air Quality Indicator
Power
Menu
Fan Speed
Indicator
KNOW THE CONTROLS
ÚThe background colour will change, acting as an additional Air Quality Indicator;
Brown: Poor / Green: Fair / Blue: Good
6
English T1
KNOW THE CONTROLS
Settings
(Wi-Fi,
Brightness,
Volume, Filter)
Manual Fan
Speed Control
PlasmaWave®
Control
Sleep Mode
Control
Set the
Display
Language
Selected Menu
Home Screen
Set Timer
7
English T1
KNOW THE CONTROLS
Alert pop-up
This type of pop-up will appear when there is an issue that is not allowing
the unit to function properly.
Verification pop-up
This type of pop-up will appear when a setting or feature needs a
confirmation to continue.
8
English T1
WARNING Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
WHERE TO USE
Do not use around mist or fumes from
industrial oil or around large quantities of
metallic dust
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships, etc.)
Do not place near any flammable materials
(aerosols, fuel, gases etc.)
Do not place below any electrical outlet
Do not place around heating elements
Do not place in an area with excessive
amounts of noxious gases
Do not have unit facing into wind or draft
Do not place in excessively humid areas
where unit may become wet
Allow 30 ~ 45 cm. of space between TVs, radios, and other electronic products
electromagnetic interference from certain electronics may cause product malfunction.
Place indoors away from direct sun light
direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
flimsy or slanted surfaces may result in abnormal noise and vibrations.
ÚThis unit is not intended to be used to preserve documents or in art conservation.
Environment with low humidity
risk of electric shock or product malfunction due to rust
9
English T1
①Remove the Filter Cover
xSqueeze the the two tabs towards the
middle and pulling it toward yourself.
②Remove the bottom filters from the
unit, they are protected inside
plastic wrap.
③Remove filters from protective
plastic wrap.
xOperating the unit without removing
lters from plastic wrap may cause
abnormal noise, deformation, or re as a
result of overheating.
④Install the bottom filters.
xInsert the lters into the
appropriate slots until the
back of the lter touches
the rear of the unit.
⑤Replace the Filter Cover.
xSqueeze the the two tabs towards the
middle and attach it back to the unit.
INSTALLING THE FILTERS
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
ÚOperating the unit without removing the plastic wrap may result in product failure.
ÚUnplug and make sure the unit is turned off before installing filters.
ÚOn the edge of each filter will show which way should face up.
High
Capacity AOCTM
Carbon Filter
Anti-microbial
PM 2.5 Filter
Fine Mesh Pre-Filter
10
English T1
⑥Remove the Top Cover by pressing
the Release buttons on both sides.
⑦Pull the True HEPA filter out of the
unit and remove from protective
plastic wrap.
xOperating the unit without removing
lter from plastic may cause abnormal
noise, deformation, or re as a result of
overheating.
⑧Insert the True HEPA filter back into
place.
⑨Hold the Release buttons on both
sides of the Top Cover and connect it
back to the unit.
INSTALLING THE FILTERS
Altri manuali per T1
2
Indice
Lingue:
Altri manuali Winix Purificatore d'aria
Winix
Winix 5300-2 Manuale utente
Winix
Winix AM90 Manuale utente
Winix
Winix NK305 Manuale utente
Winix
Winix ZERO+ WiFi Manuale utente
Winix
Winix A231 Manuale utente
Winix
Winix Zero AUS-1050AZBU Manuale utente
Winix
Winix 5300-2 Manuale utente
Winix
Winix XQ Pro Manuale utente
Winix
Winix AM90 Manuale utente
Winix
Winix 5500-2 Manuale utente
Winix
Winix 2020EU Manuale utente
Winix
Winix NK300 Manuale utente
Winix
Winix FreshHome PlasmaWave WACP150 Manuale utente
Winix
Winix HEPA 5500 Manuale utente
Winix
Winix PlasmaWave WACU300 Manuale utente
Winix
Winix C555 Manuale utente
Winix
Winix ZERO Pro Manuale utente
Winix
Winix C545 Manuale utente
Winix
Winix FreshHome PlasmaWave WACP150 Manuale utente
Winix
Winix FreshHome PlasmaWave WACP150 Manuale utente
