WURM HCO2-G4 Manuale utente

Master module for process control of R744 refrigeration plants

HCO2-G4_V8.5.0_PI_2022-08_EN 1

Subject to technical changes

HCO2-G4

1 HCO2-G4

Master module for process control of R744 refrigeration plants

1.1 Front view

Fig. 1: Front view of HCO2-G4

1.2 Features

• Plant-specific installation of control circuits

• Start-up support with special start-up mode

• High pressure control and medium pressure control with up to 2 valves

• Analogue gas cooler control or via Modbus interface in 2 groups with functions for cleaning, addi-

tional cooling, emptying and sub-area shutdown

• Refrigerant level monitoring in collector and MT/LT separators with level switches or filling level

probes, flooding of MT and LT cold locations

• Oil return and oil pressure control

• Compressor protection via load shedding

• Liquid injection and hot gas bypass with optional partial load reduction

• Parallel compression with 1 modulating and 3 multi-step compressors, load shedding

• Ejector operation for Wurm ejectors: gas (3 x modulated) and liquid (1 x modulated) incl. control

of the valves mounted on the suction side

• Air conditioning at medium pressure level with pump control incl. safety functions

• Heat recovery:

Up to 2 heat recovery units, 7-stepped sequences for desuperheating, power increase, GC fan

speed reduction, GC bypass, GC heat pump, 2 external heat sources

• Heating up operation with optional reservoir control (electric heating element, pumps)

• Heat pump control:

1 GC heat pump and up to 2 external heat pumps in the refrigerant circuit at MT 1, MT 2 or LT

level including defrost, outside temperature-controlled rack shift and optional compressor decou-

pling in heat pump operation

• Can be locked to prevent unwanted parameter adjustment (SAC – Security Access Control)

• CAN bus connection by patch cable and push-in terminals

• Wurm G4 control concept and innovative user interface with 1-finger operation

• Graphical display with backlighting, plain text, 6 operating keys, and 1 Info key

• Context-sensitive Help with links to the paperless info Wurm-App

• Direct navigation by Quicklink

• Fastening in the installation frame, or individual installation without frame

• Connection to the Wurm system via Wurm CAN communication bus (C-BUS) and

FRIGODATA XP

Master module for process control of R744 refrigeration plants

2 HCO2-G4_V8.5.0_PI_2022-08_EN

Subject to technical changes

HCO2-G4

1.3 Safety instructions

Writing conventions

CAUTION • Avoid the described hazard: Otherwise minor or medium bodily injury or property damage will

result.

WARNING • Avoid the described hazard: Otherwise there is danger from electric voltage that can lead to

death or serious bodily injury.

For your safety

For safe operation and to avoid personal injury and equipment damage through operator error, read

these instructions, become familiar with the device, and follow all safety instructions on the product

and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG Elektronische Sys-

teme. Keep these instructions ready to hand for quick reference, and pass them on with the device if

the product is sold. Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in the case of

improper use or use for purposes other than the intended purpose.

WARNING DANGER TO LIFE FROM ELECTRIC SHOCK AND/OR FIRE!

• Switch off the power to the entire plant when carrying out installation, wiring or disassembly work!

Otherwise, mains voltage and/or external voltage may still be present, even if the control voltage

is switched off!

• The wiring of the device must be carried out only by qualified electricians!

• Use the correct tools for any work!

• Check the entire wiring after connection!

• Observe the maximum loads for all connections!

• Never expose the device to moisture, for example due to condensation or cleaning agents.

• Stop operating the device if it is faulty or damaged and its safe operation is compromised!

• Do not open the device.

• Do not repair the device yourself! If the device requires repairs, send it in with an exact descrip-

tion of the fault!

CAUTION ELECTROMAGNETIC INTERFERENCE MAY CAUSE FAULTS!

• Always use shielded data cables, and place them far away from power lines!

Target group This manual is intended for "service technician" personnel.

Intended use The HCO2-G4 is a master module for process control of R744 refrigera-

tion plants.

Wurm Infocenter paperless info

Master module for process control of R744 refrigeration plants

HCO2-G4_V8.5.0_PI_2022-08_EN 3

Subject to technical changes

HCO2-G4

Version and validity of the documentation

Any versions not listed are special solutions for individual projects and are not described in detail in this document.

This document will automatically cease to be valid if a new technical description is issued.

Manufacturer: Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid

You can find more information on our website at www.wurm.de.

1.4 Installing the device

WARNING

DANGER TO LIFE FROM ELECTRIC SHOCK AND/OR FIRE!

• Switch off the power to the entire plant before installing. Otherwise, mains voltage and/or exter-

nal voltage may still be present, even if the control voltage is switched off.

Installing in the MGR131/141 and MGR231/241 installation frame

The entire plant must be free of voltage.

1. Push the device into the installation frame up to the stop.

The device locks into place between the spring clips.

Fig. 2: Installing in the MGR131/141 installation frame

NOTICE

• Please refer to the product information for the MGR131/MGR141 and MGR231/241 installation

frames.

Installing the device with ZEM type screw-in clamps

The entire plant must be free of voltage.

1. Insert the device up to the stop in a mounting cutout in the switch cabinet door.

2. Fix the device to the switch cabinet door using the ZEM type screw-in clamps.

Fig. 3: Installing device in a mounting cut-out with ZEM clamps

Version Date

V8.5.0 and higher 2022-08 Documentation status

102

106

Master module for process control of R744 refrigeration plants

4 HCO2-G4_V8.5.0_PI_2022-08_EN

Subject to technical changes

HCO2-G4

1.5 Circuit diagram

Fig. 4: HCO2-G4 circuit diagram

Wiring and connecting multiple master modules

Fig. 5: Wiring and connecting master modules

1.6 Technical data

































9

&%86

)%86

9

)%86

&%86





287387 ,1387

















2))

0RGEXV

5HTXHVW+56WHS

)DXOW1&5()030LQ

)DXOW1&5()030D[

)DXOW1&836

+5YDOYH

5HTXHVW+56WHS

+5SXPS

'HVXSHUKHDWHU/7

+RWJDVE\SDVV

/LTXLGLQMHFWLRQ

)DVWUHWXUQ07

11 11 1112 1212

24V24V24V

Access

barrier

Access

barrier

Access

barrier

Power supply 230V~, +10% / -15%, 50Hz, max. 13VA

Display Graphical display with backlighting

1 x red LED, flashes in case of fault

1 x green LED, for parameter adjustment

1 x yellow LED, for C-BUS operating status

1 x yellow LED, for F-BUS operating status

C-BUS communication 3-wire CAN bus interface, shielded, galvanically isolated, 2.5mm2 push-

in terminals / RJ45 socket and switchable terminating resistor for com-

munication with system devices

F-BUS communication 3-wire CAN bus interface, shielded, galvanically isolated, 2.5mm2 push-

in terminals / RJ45 socket and switchable terminating resistor for com-

munication with field modules

Modbus communication 3-wire Modbus RTU, galvanically isolated, RJ45 socket

Digital inputs 6 x 24V=, self-powered, approx. 5mA per input, push-in terminals

2.5mm2

Digital outputs 8 x normally open contact with common supply, 1A,

rated voltage 230V~, push-in terminals 2.5mm2

Dimensions (W x H x D) 109 x 109 x 92mm

Housing Plastic, foil

Fastening In MGR installation frame, individual installation with ZEM

Ambient temperature Operation: 0...+55°C, storage: -25...+70°C

Weight Approx. 650g

CE conformity - 2014/30/EU (EMC Directive)

- 2014/35/EU (Low Voltage Directive)

EAC conformity - TR CU 004/2011

- TR CU 020/2011

RoHS II

Valid from Version 8.5.0

Indice

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente