Xante PlateMaker 4 Manuale utente
Introduction and Installation 1-1
Chapter 1 - Introduction and Installation
PlateMaker 4
Fig. 1.1 PlateMaker 4 Printer
The PlateMaker 4 (Fig. 1.1) provides a complete prepress solution for graphics
professionals. These include groups such as small commercial printers, print shops,
in-plant operations, and service shops in need of high-quality, fast turnaround
printing at a low cost.
The PlateMaker 4 offers high resolution and true Adobe PostScript 3 output on up to
13" x 35.5" (330 mm x 901 mm) media. Using XANTÉ’s CPT (Clean Plate
Technology) and XANTÉ's patented Accurate Calibration Technology (X-ACT), you
can print quality paper and polyester plates which are immediately ready for press
with no intermediate steps required. Plus, this versatile printer prints on paper, cover,
film, transparencies, labels, and envelopes.
About this Manual
This user’s guide covers installation, setup, and operation of a PlateMaker 4 printer.
Chapter 1—Introduction and Installation summarizes this manual and PlateMaker 4
features, optional configurations, and the printer's warranty. It also covers printer setup
and required cabling as well as a printer overview.
Chapter 2—Macintosh Setup describes the XANTÉ Utilities for the Macintosh. This
includes connecting to the appropriate interface, installing the Adobe PostScript
printer driver, your printer’s PPD, printer utilities, and Adobe Downloader as well as
procedures for using many features.
1-2 Introduction and Installationbb
Chapter 3—PC Setup describes the XANTÉ Utilities for the PC. This includes
connecting to the appropriate interface, installing the Adobe PostScript printer driver,
your printer’s PPD, printer utilities, and procedures for using many features.
Chapter 4—Configuration describes using front panel keys and menus and the Print
dialog box to configure many printer features.
Chapter 5—Media: Selecting, Handling, and Printing describes selecting media sizes
and types, handling that media, and creating high quality output on the various
media.
Chapter 6—Maintenance, Specifications, and Warranty describes printer care,
technical specifications, service options, and the warranty.
Chapter 7—Printer Options describes optional upgrades for your printer.
Chapter 8—Troubleshooting covers troubleshooting issues and technical support
options.
Glossary—defines terms related to your printer, XANTÉ utilities, and the printing
industry.
Index—alphabetically lists major manual topics with corresponding page numbers
and some cross-references.
You can print a Menu Layout utility page to use as a quick reference sheet. This page
lists front panel menus and their current settings. See “Utility Pages” in chapter 4 for
details.
Introduction and Installation 1-3
Manual Conventions
The following conventions are used in this manual:
↵ indicates that you need to press the Return
key on a Macintosh or the Enter key on a PC.
indicates additonal or emphasized information.
indicates instructions that must be followed to
avoid damage to files or equipment.
indicates instructions that must be followed
exactly to avoid personal injury.
: indicates the path for a file or folder and links
procedure steps.
< > indicates variable information such as the
printer name or model.
1-4 Introduction and Installationbb
Printer Features
The following chart lists PlateMaker 4 printer features.
Features PlateMaker 4
IDT 79RC3255 Processor Std.
RAM:
64 MB Std.
128 MB Opt.
256 MB (maximum) Opt.
Adobe PostScript 3 Std.
136 PostScript Fonts Std.
Resolutions:
600 x 600 dpi Std.
1200 x 1200 dpi Std.
2400 x 2400 dpi Opt
Engine Speed (letter/A4):
10 ppm Std.
Interfaces:
Parallel Std.
Ethernet (EtherTalk, LPR, TCP/IP, IPP) Std.
USB (PC only) Std.
Paper Sizes:
From 3.94" x 5.83" Std.
(100 mm x 148 mm)
Up to 13.00" x 35.50"
(330 mm x 901 mm)
Paper Weights:
Cassettes 16-28 lb bond (60 -106 g/m2)Std.
Multipurpose Feeder (16-36 lb bond (60-135 g/m2)Std.
Media Handling:
Multipurpose Feeder (150 sheets) ∞Std.
Built in Paper Feeder (500 sheets) Std.
Second Paper Feeder (500 sheets) Opt
Introduction and Installation 1-5
Media Types:
Plain and Laser Paper Std.
Heavy Paper Std.
Cover Std.
Transparencies Std.
Labels Std.
Envelopes Std.
Polyester Plate Std.
Paper Plate Std.
Matte Film Std.
Clear Film Std.
Mirror Print Std.
Negative Print Std.
Tray Chaining Std.
XANTÉ Utilities (PC and Macintosh) Std.
Internal IDE Hard disk Opt.
Font Accelerator*Std.
Fuser Temperature Control Std.
Clean Plate Technology
EP1 (Toner Control) Std.
Graphic Software Package
Halftone Calibration Technology (Gamma) Std.
Enhanced Screening Technology Std.
Accurate Calibration Technology (X-ACT; patented) Std.
Densitometer Support Std.
Gripper Offset Std.
NEIT (Negative Enhanced Imaging Technology; patented) Opt.
340 Upgrade Opt.
* Requires optional internal hard drive
∞Plain paper capacities; capacity varies depending on type of media
1-6 Introduction and Installationbb
Installation
Installation covers selecting a printer location as well as unpacking, becoming familiar
with, and connecting your printer.
Printer Location
Set up your printer in a location that can support its weight and can provide sufficient operation
and maintenance clearance. To prevent overheating, allow at least 8.0" (200 mm) clearance for
the printer’s vent.
Fig. 1.2 Location Guidelines
Printer Package
Unpack the printer, saving the packing materials.
1. Remove the items packed on top of the printer.
Introduction and Installation 1-7
The printer weighs approximately 58.5 lb (26.5 kg) without the toner, cassettes, and
media installed.
• Always have two people lift the printer.
• Only lift the printer using the recessed grip areas on the right and left sides.
2. Remove the shipping stabilizer from the top of the printer; then, lift the printer
out of the box (fig. 1.3).
Fig. 1.3 Lifting the Printer
3. Remove the plastic wrap, tape, and shipping stabilizers from all of the items.
Your printer package contains the following items:
• Your XANTÉ printer
• 500 sheet cassette
• Power cord
• Quick Reference manual
• XANTÉ Utilities CD-ROM
• Toner cartridge
Additional paper cassettes and feeders are packed separately. RAM, internal hard disk,
340, and resolution upgrades ordered with your printer are installed at the factory
before shipping.
If you do not receive your full shipment or if anything is damaged, call XANTÉ
Customer Support at 800-926-8393 (US and Canada) or your XANTÉ vendor.
1-8 Introduction and Installationbb
Printer Overview
Use Figures 1.4, 1.5, and 1.6 to become familiar with your new printer.
Front Panel Paper Stop Output Tray
Fuser Cover
Output Tray Extension
Top Cover
Top Cover Latch
Multipurpose Feeder
(Closed)
Paper Cassette
Output Tray
Duplexer Replacement Cover
Back Cover
Duplexer Port Power Cord Receptacle
Power Switch
Parallel Port
Ethernet Port
USB Port
Vent
Fuser Cover
Fig. 1.4 Front View of Printer Fig. 1.5 Rear View of Printer
Top Cover Top Cover Latch
Toner Cartridge
Print Density Dial
Multipurpose Feeder
(Open)
Multipurpose Feeder
Extentsion
Paper Cassette
Fig. 1.6 Inside Front View of Printer
Toner Cartridge
The printer’s toner cartridge combines the toner and drum. This cartridge can print
approximately 7,000 sheets of letter/A4 size pages at 5% coverage.
Quality and reliability of refilled toner cartridges vary; XANTÉ recommends not using
them. Printer damage caused by these products is not covered by your printer warranty.
Handling the Toner Cartridge
Use these guidelines to ensure maximum life and print quality from your toner
cartridge and to prevent cartridge or printer damage:
• Use toner cartridges before their expiration dates. Cartridge shelf life is
approximately 2 years unopened or 6 months opened.
• Never move the printer with the cartridge installed. Toner spills can damage the
printer and affect print quality.
Introduction and Installation 1-9
• Do not expose the cartridge to bright lights or direct sunlight. Keep the
cartridge in its protective bag until installation. If you must remove the
cartridge temporarily, place it in the original bag or wrap it well to protect it
from light.
• Do not open the drum shutter or touch the drum’s surface. The shutter
protects the photosensitive drum from light.
• Keep the cartridge away from computer hard disks and monitors. It contains a
magnet that can cause data loss or equipment damage.
• Store unopened cartridges right side up on a level surface.
• Always set the cartridge flat with the handles on the top.
• Dispose of the cartridge following safety laws and regulations.
The toner is highly combustible. Never dispose of it by incineration.
Removing and Installing the Toner Cartridge
Check the density dial when you replace a toner cartridge. The dial setting for the
previous cartridge may be too high or too low for the new cartridge. See “Adjusting
Print Density” in chapter 4 for details.
1. Remove all media from the output tray. Then, squeeze the top cover latch to
release the lock (fig. 1.7).
Fig. 1.7 Release Top Cover Latch Fig. 1.8 Open Top Cover and Multipurpose
Feeder
2. Lift the top cover. The multipurpose feeder opens automatically as you open
the top cover (fig. 1.8).
1-10 Introduction and Installationbb
Do not touch any parts inside the printer.
3. Remove the toner cartridge if it is in the printer by grasping its handles and
pulling it slowly out of the printer (fig. 1.9).
Once you begin pulling the cartridge out of the printer, remove it completely. The
cartridge’s shutter may not open properly or be damaged if the cartridge is pulled
partially out and then pushed back in the printer.
Fig. 1.9 Remove Toner Cartridge Fig. 1.10 Shake Toner Cartridge
4. Remove the new toner cartridge from its package. Then, gently shake the
cartridge several times to distribute toner evenly (fig. 1.10).
Shake the cartridge enough to free any compacted toner. Using the printer with toner
still compacted may damage the cartridge.
5. Place the toner cartridge on a flat surface; then, grasp the sealing tape’s end tab
and pull the tape straight out (fig. 1.11).
If the tape is pulled out at an angle, it may break off inside the cartridge.
Fig. 1.11 Remove Sealing Tape Fig. 1.12 Insert Pins into Guide Channels
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Xante Stampante
Xante
Xante Impressia Manuale utente
Xante
Xante Assel-a-Writer-8300 Manuale utente
Xante
Xante Accel-a-Writer 8300 Manuale utente
Xante
Xante ColourLaser series guide Manuale utente
Xante
Xante AW 1200 Manuale utente
Xante
Xante CL30 Manuale utente
Xante
Xante CL30 Guida utente
Xante
Xante Accel-a-Writer 8300 Manuale di riferimento
Xante
Xante ColourLaser series guide Manuale utente
Xante
Xante Accel-a-Writer 812 Manuale utente
Xante
Xante Accel-a-Writer 8200 Manuale utente
Xante
Xante IMPRESSIA Manuale utente
Xante
Xante Accel-a-Writer 3 Series Manuale utente
Xante
Xante PlateMaker 3 Manuale utente
Xante
Xante Accel a Writer 4 Series Manuale utente
Xante
Xante Accel a Writer 8300 Manuale utente
Xante
Xante Accel-a-Writer 8200 Manuale utente
Xante
Xante Accel a Writer 812 Manuale utente
Xante
Xante Accel-a-Writer Accel-a-Writer 3DN Manuale
Xante
Xante Accel-a-Writer 8300 Manuale di riferimento
