Xerox SquareFold Trimmer Module Manuale utente

SquareFold®Trimmer Module

User Guide

Version 1.0

November 2008

Xerox Corporation

Global Knowledge & Language Services

800 Phillips Road

Building 218

Webster, New York 14580

Xerox®, the sphere of connectivity design, and SquareFold® Omtool™, Equitrac™ and FreeFlow™ SMARTsend™ are trademarks of Xerox

Corporation in the United States and/or other countries.

Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law

or hereinafter granted, including without limitation, material generated from the software programs that are displayed on the screen such as

styles, templates, icons, screen displays, looks, etc.

Microsoft, MS-DOS, Windows, Windows NT, Microsoft Network, and Windows Server are either trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries. Novell, NetWare, IntranetWare and NDS are registered trademarks of

Novell, Inc. in the United States and other countries. Adobe, Acrobat, PostScript, PostScript3, and PostScript Logo are trademarks of Adobe

Systems Incorporated. Apple, AppleTalk, EtherTalk, LocalTalk, Macintosh, MacOS and TrueType are trademarks of Apple Computer, Inc.,

registered in the U.S. and other countries. HP, HPGL, HPGL/2, and HP-UX are registered trademarks of Hewlett-Packard Corporation.

All product/brand names are trademarks or registered trademarks of the respective holders.

SquareFold Trimmer User Guide i

Table of contents

Overview 1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Identifying the components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Main components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Paper path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Square Fold Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Trimmer Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Hints and tips 10

Printing full-page images on booklets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Follow these tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Problem solving 12

Jam clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Fault Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Technical data 18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ii SquareFold Trimmer User Guide

Table of contents

SquareFold Trimmer User Guide 1

The SquareFold Trimmer Module is an optional finishing

device that is used in conjunction with another optional

finishing device that contains a booklet maker.

Overview

The SquareFold Trimmer Module:

Receives the booklet from the booklet maker area of the•

finisher,

Flattens the booklet spine, thereby reducing the•

booklet’s thickness and giving it the appearance of a

perfect-bound book, and

Trims/cuts away the face (edge) of the booklet,•

resulting in a neat finished edge.

Introduction

SquareFold Trimmer Module

Tip: Always refer to the Hints and Tips section of this manual

before using the SquareFold Trimmer Module. The Hints and

Tips section provides valuable information about setting up

your jobs, which in turn ensures the best possible output for

your print/copy jobs.

Note 1: The booklet is assembled and stapled in the booklet

area of the finisher; therefore, the booklet enters the

SquareFold Trimmer Module already assembled. Any

adjustments to the image of the original and its

lacement on the booklet

age must be done either from

the machine’s UI or from your print driver.

Note 2: You may want to run one or more test prints/copies

before running larger jobs.

Overview

SquareFold Trimmer User Guide

The main components consist of the following:

Top Left Cover: Open this cover to remove paper jams. The

square fold mechanism is found in this area.

Top Right Cover: Open this cover to remove paper jams. The

trimming mechanism is found in this area.

Important!: The top covers cannot be opened during normal

operation or when the machine is idle. The covers can be

opened only when an indicator is lit (refer to page 4) and a

am/fault occurs within the S

uareFold Trimmer Module

Booklet Output Tray: This tray receives square-fold booklet

output from the finisher.

Trimmer Waste Container: Collects scrap/waste from the

trimmer. Pull open to remove and dispose of trimmer waste

scraps.

Identifying the components

Main components

Control Panel: The Control Panel consists of a mimic display,

buttons, and various indicator lights. The control panel is

discussed in more detail on page 4.

Overview

3SquareFold Trimmer User Guide

1. 2.

3. 5. 6.

2. 3. 5.

The booklet leaves the booklet area of the finisher and enters

SquareFold Trimmer Module.

Once the booklet spine reaches the square fold area, the

booklet is clamped and the square-folding operation begins.

The booklet is flattened and the spine squared according to

the square-fold setting indicated on the control panel.

For detailed information on each of Square Fold settings,

refer to page 6.

After the booklet is flattened and the spine squared, it is

moved to the trimmer area.

The booklet then moves to the exit area where it is

transported to the Booklet Output Tray.

Paper path

The Booklet Exit sensor (in the SquareFold Trimmer Module)

detects the lead edge (spine) of booklet and moves the

booklet to square fold area.

Based on the finished booklet size, the booklet is moved

until the trail edge reaches the trimmer cutter.

The trail edge is trimmed/cut (based on the finished

booklet size entered for the Trimmer Mode Setting).

Tip: Booklets exiting/leaving the SquareFold Trimmer

Module may contain trim remnants/scraps from the

reviously trimmed booklet. This is due to static electricity

build-up and is normal. If booklets contain trim

remnants/scraps, simply remove and discard them.

SquareFold Trimmer User Guide

Overview

1a.

1b.

1c.

1d.

1. 2.

2a. 2b.

2c.

2d.

3a.

3b.

3c.

3d.

The Control Panel consists of the following:

Fault indicators: These indicators light when a fault or jam

occurs in either a particular area of the SquareFold Trimmer

Module or in the finisher:

Control panel

This indicator lights when a jam occurs as the booklet is

leaving the exit area of the finisher.

This indicator lights when a jam occurs in the square

fold area.

This indicator lights when a jam occurs in the trimmer

area.

This indicator lights when the Trimmer Waste Container

is pulled out or when it is full.

Trimmer functions: This area of the control panel contains

the following:

1b.

1c.

1d.

Trimmer power indicator: This lights when the Trimmer

Mode is on.

Trimmer on/off button: Press this button to switch

on/off the Trimmer Mode.

2a.

2b.

Tip: If one of these indicators (1a, 1b, 1c) is lit, the top

covers can be opened, and the jam/fault cleared; otherwise,

during normal operation or when the machine is idle, the top

covers cannot be opened. For information on jam/fault

clearance, refer to page 12.

1a.

Overview

SquareFold Trimmer User Guide 5

3. Square Fold functions: This area of the control panel

contains the following:

Square Fold power indicator: This lights when the

Square Fold Mode is on.

Square Fold on/off button: Press this button to switch

on or off the Square Fold Mode.

Settings button: Press this button to adjust the Square

Fold setting; refer to 3d.

Square Fold Setting: Select the desired setting; these

settings are discussed in more detail on page 6.

3a.

3b.

3c.

3d.

Up/down buttons: Press the up or down button to

adjust the Trimmer Mode setting; refer to 2d.

Trimmer Mode Setting: This displays the trimmer

setting in millimeters. The trimmer setting is based on

the final output booklet size and is adjustable. This is

discussed in more detail on page 8.

2c.

2d.

SquareFold Trimmer User Guide

Overview

The Square Fold Settings are found on the SquareFold

Trimmer Module control panel. The settings can be switched

on or off based on user preference. When the settings are

switched on, you can select one of five options depending on

your requirements for the finished booklet job:

+2: Use this setting when you want the most amount of

pressure applied to the spine of the booklet. The more

pressure applied to the booklet, the more square the booklet

spine will be. +2 is the greatest amount of pressure that can

be applied to the booklet.

Additionally, you may want to select this setting when your

finished booklet is five pages or less and on heavier weight

paper (200 g/m² or greater).

+1: Use this setting when you want a greater amount of

pressure applied to the spine of the booklet, but not as much

pressure as the +2 setting uses.

Square Fold Settings

Auto: This is the machine default setting and is used for

most jobs.

-1: Use this setting when you want less pressure applied to

the spine of the booklet. The less pressure applied to the

booklet, the more rounded the booklet spine will be.

-2: Select this setting when your finished booklet is five pages

or less and on lighter weight paper (100 g/m² or lower). -2 is

the least amount of pressure that can be applied to the

booklet.

Choose the setting that best fits your needs for the booklet

output.

Note: You may want to run one or more test prints/copies

before running larger jobs.

Altri manuali per SquareFold Trimmer Module

Indice

Altri manuali Xerox Accessori per stampanti

Xerox

Xerox 497K17750 Manuale utente

Xerox

Xerox 5400DX - Phaser B/W Laser Printer Manuale utente

Xerox

Xerox PostScript Kit Manuale utente

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manuale utente

Xerox

Xerox 7500/DT - Phaser Color LED Printer Manuale

Xerox

Xerox Telecopier 7033 Manuale utente

Xerox

Xerox 6130N - Phaser Color Laser Printer Manuale utente

Xerox

Xerox DocuPrint C3055 Manuale utente

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manuale utente

Xerox

Xerox Phaser 6180MFP Manuale utente

Xerox

Xerox 980 Istruzioni per il montaggio

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manuale utente

Xerox

Xerox Creo CXP6000 Manuale utente

Xerox

Xerox 7400DN - Phaser Color LED Printer Manuale utente

Xerox

Xerox B205 Manuale utente

Xerox

Xerox VLB70 Series Manuale utente

Xerox

Xerox DocuColor 12 CP Manuale utente

Xerox

Xerox Phaser 6128 MFP Manuale utente

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manuale utente

Xerox

Xerox Phaser 7750 Manuale

Xerox

Xerox DocuPrint N24 Istruzioni operative originali

Xerox

Xerox 5400DX - Phaser B/W Laser Printer Manuale del proprietario

Xerox

Xerox DocuPrint N24 Manuale utente

Xerox

Xerox 4004 Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale

Citizen

Citizen CBM-202PC Series Manuale utente