Xerox Versant 4100 Press Manuale utente
Xerox Customized Envelope Feeder
Problem Solving Guide
ii Xerox Customized Envelope Feeder – Problem Solving Guide
©2022 Xerox Corporation. All rights reserved. Xerox and the sphere of connectivity
design and all product names mentioned in this publication are trademarks of Xerox
Corporation in the United States and/or other counties.
Copyright protection claimed includes all forms and matters of copyrightable material
and information now allowed by statutory judicial law or hereinafter granted,
including without limitation, material generated from the software programs
displayed on the screen such as icons, screen displays, or looks.
Other company trademarks are also acknowledged.
Changes are periodically made to this document. Changes, technical inaccuracies, and
typographic errors will be corrected in subsequent editions.
Document Revision: K (August 22, 2022).
Xerox Customized Envelope Feeder – Problem Solving Guide iii
Contents
Section 1 Introduction................................................................................................... 1-1
Overview ...................................................................................................................................................................................1-1
Section 2 Initial Entry RAP........................................................................................... 2-1
Section 3 Troubleshooting ........................................................................................... 3-1
Section 4 Repairs and Adjustments .......................................................................... 4-1
REP 4.1 Cleaning Feed Belts, Discharge Belts and O-Rings ...............................................................................4-3
REP 4.2 Cleaning Sensor Lenses ....................................................................................................................................4-3
REP 4.3 Checking for Separator Assembly Wear....................................................................................................4-3
REP 4.4 Separator O-Ring Advancement...................................................................................................................4-4
REP 4.5 Separator O-Ring Replacement ....................................................................................................................4-6
REP 4.6 Carriage Belts........................................................................................................................................................4-8
REP 4.7 Versant Error Messages.................................................................................................................................4-11
REP 4.8 Separator Adjustment Procedure..............................................................................................................4-13
REP 4.9 Not Used.............................................................................................................................................................. 4-15
REP 5.0 Separator O-Ring Adjustments for Different Media.........................................................................4-16
Section 5 General Procedures ..................................................................................... 5-1
GP 5.1 Cleaning Feed Belts, Discharge Belts and O-Rings .................................................................................5-1
Section 6 Mechanincal/Electrical Components .................................................... 6-1
iv Xerox Customized Envelope Feeder – Problem Solving Guide
Thispageleftblankintentionally.
Xerox Customized Envelope Feeder – Problem Solving Guide 1-1
Section 1 Introduction
Overview
The names and locations of the Feeder components are shown below.
Hopper Side Guides
Wedge
Jog Button
Ready/Suspend
Switch
Mounting
Arm
Locator
Block
Discharge Height
Adjustment Knob
Separator Adjustment Knob
Hopper Adjustment Knob
Hold Down
Sizing
Pocket
Adjustment
Knob
Sizing Pocket
Discharge
Assembly Floating
Discharge
Block
1-2 Xerox Customized Envelope Feeder – Problem Solving Guide
Overview, continued.
Feature Description
Hopper Side Guides
The stack of product to be fed is loaded between the Hopper Side Guides to
help keep it aligned for entry through the separator assembly area.
Wedge
The wedge provides the support necessary to transfer the center of gravity
of the product stack in the hopper up off the deck plate onto the feed belts
and against the separator assembly.
Stand (not shown)
The stand supports the Feeder including casters to provide easy mobility.
Feed Belts (not shown)
The feed belts provide the friction and motion necessary to pull individual
product from the bottom of the stack and through the separator assembly
area. The feed belts must be cleaned with isopropyl alcohol to ensure
proper functionality.
Discharge Belt (not shown)
The long discharge belt provides the friction and increased speed necessary
to pull the piece of product away from the separator assembly, resulting in
a gap between each piece of product as it leaves the separator assembly
area. The discharge belts must be cleaned with isopropyl alcohol to ensure
proper functionality.
Hold Down
The Hold Down assembly forces the product onto the discharge belt so it
can be singled out after it exits the separator assembly. The Hold Down
Rollers must be in contact with the clear discharge belt but not so low that
the black bar is resting on the belt. This would result in jams.
Separator
The separator assembly is adjustable so the gap between the separator
assembly and the feed belts allows only a single piece of product at a time
to pass under the separator. Allows quick adjustment from paper thickness
to envelope thickness.
Jog Button
Advances the Feeder at a fixed speed. This function is useful during Feeder
setup and may be used to clear jams.
Ready/Suspend Switch
Toggles between ready mode and suspend mode.
Stand Mount Interface
Designed to easily fit over the top of the stand. Once installed onto the
stand, fasten with provided thumb screws.
Locator Blocks
Designed to help align the Feeder within the Versant Paper Tray while
positioning the Feeder during installation, or when clearing a jam.
Xerox Customized Envelope Feeder – Problem Solving Guide 1-3
Installation Configurations
Side MSI (Bypass) Configuration
OHCF MSI (Bypass) Configuration
1-4 Xerox Customized Envelope Feeder – Problem Solving Guide
Installation Video
An installation video is accessible by clicking the link below.
https://xerox.sharepoint.com/teams/USACAS/SitePages/Xerox%20Customized%20Envelope%20Feeder.aspx
Xerox Customized Envelope Feeder – Problem Solving Guide 2-1
Section2InitialEntryRAP
UsethestepsonthefollowingpagetodiagnoseproblemswiththeEnvelopeFeeder
NOTEIftheenvelopefeederissetupproperly,asingleenvelopeshouldreachthefeedheadonthe
printerapproximatelyhalfwayoverthefeedrolleratthebottomoftheMSItray.
Correctenvelopefeedposition
2-2 Xerox Customized Envelope Feeder – Problem Solving Guide
Envelopesarenotreachingthecorrectfeedrollerposition(seebelowfordetails).
YN
Multipleenvelopesarereachingthefeedrolleratonce(multifeeds).
YN
Envelopesarejammingatthetopofthedischarge,wrappingaroundtheseparator.
NY
Gotopage3‐3.
CallXeroxforassistance.
Gotopage3‐4.
Gotopage3‐8.
Altri manuali per Versant 4100 Press
3
Indice
Altri manuali Xerox Accessori per stampanti
Xerox
Xerox DocuPrint N24 Manuale utente
Xerox
Xerox 6130N - Phaser Color Laser Printer Manuale utente
Xerox
Xerox 3100MFPX - Phaser B/W Laser Manuale utente
Xerox
Xerox WORKCENTRE C2424 Manuale utente
Xerox
Xerox 9200-II Manuale di istruzioni
Xerox
Xerox DOCUCOLOR 12 Manuale utente
Xerox
Xerox 5500DN - Phaser B/W Laser Printer Manuale utente
Xerox
Xerox 7500/DT - Phaser Color LED Printer Manuale
Xerox
Xerox ECP- Magenta Toner Premix/Concentrate for ECP... Istruzioni operative e di manutenzione
Xerox
Xerox 645 Istruzioni operative
Xerox
Xerox 4510B - Phaser B/W Laser Printer Manuale utente
Xerox
Xerox VersaLink B7025 Manuale utente
Xerox
Xerox Instant Print Kiosk Manuale utente
Xerox
Xerox Pasher 7750 Manuale utente
Xerox
Xerox ColorStix 8200 Ink Sticks Series s Manuale utente
Xerox
Xerox 5500DN - Phaser B/W Laser Printer Manuale utente
Xerox
Xerox C11 - DocuPrint Color Inkjet Printer Manuale utente
Xerox
Xerox Phaser 6128 MFP Manuale utente
Xerox
Xerox 8560DN - Phaser Color Solid Ink Printer Manuale utente
Xerox
Xerox 5500DN - Phaser B/W Laser Printer Manuale utente
