Xiaomi Mi 2 Pro Manuale utente

Mi True Wireless Earphones 2 Pro

User Manual

Charging Case Earphones

Type-C

Charging Port

Function

Button

Indicator

Light

Primary

Microphone

Secondary

Microphone

Touch Button

Read this manual carefully before use, and retain it for future reference.

Product Overview

Illustrations of product, accessories, and user interface in the user manual are for reference

purposes only. Actual product and functions may vary due to product enhancements.

Earphones User Manual Type-C

Charging Cable

Charging Case Ear Tips

Package Contents

Instructions

Charging

●Charging the earphones

When the earphones are placed in the charging case, they will automatically start charging.

●Charging the charging case

Use the Type-C charging cable to charge the charging case, or place the charging case onto a

compatible wireless charging pad with its indicator facing up to charge it. The charging indicator on

the case is on while charging, and turns off once it is fully charged.

Checking Battery Level

●Checking the battery level of the earphones

After connecting the earphones to a phone, you can check the earphones' battery level on the

phone's status bar.

Note: The phone's status bar always displays the battery level of the earphone with the lowest

battery level. This feature is not supported by some phones.

●Checking the battery level of the charging case

Open the charging case's lid, or press the function button if the lid is closed:

1. When the charging case's indicator light stays lit for 5 seconds, it indicates the battery level is

sufficient.

2. When the charging case's indicator light is blinking, it indicates its battery level is low and it

should be charged immediately.

●Checking the battery level by a Mi phone

After successfully connecting to a phone, place the earphones into the charging case and close its

lid. Make sure the Bluetooth function is enabled on your Mi phone. Hold your phone close to the

charging case, then open the case's lid. A notification will appear on the phone, then you can check

the battery level of the earphones and the charging case.

Note: When checking the battery level on your phone, please update your Mi phone to the latest

stable version. This feature is currently only supported by some Mi phones.

Turning On

When opening the charging case, the earphones will automatically turn on.

Sleep Mode

Place the earphones back into the charging case and close the lid, the earphones will disconnect

and go into sleep mode automatically.

Wearing

Take the earphones out of the charging case, and insert them into your ears according to the left (L)

and right (R) marks.

Note: After using the earphones, place them back into the charging case. This will extend their

lifespan and help you avoid losing or misplacing them.

Connecting

●Connecting the earphones to a new device

1. Place the earphones into the charging case, then press and hold the function button for 2

seconds. The charging case's indicator light will start blinking to indicate that the earphones are

awaiting a connection.

2. Enable the device's Bluetooth, then locate and connect to "Mi Earphones 2 Pro". If a

passcode is requested, enter "0000".

Note: Before using the earphones for the first time, please place them into the charging case and

press and hold the function button for 5 seconds to activate them. Once activated, the earphones

will automatically enter the awaiting connection state.

●Connecting the earphones with a Mi phone

Place the earphones into the charging case and close its lid. Make sure the Bluetooth function is

enabled on your Mi phone. Hold your phone close to the charging case, then open the case's lid.

Follow the on-screen instructions of the phone to connect to the earphones.

Note: The feature of quick connection is currently only supported by some Mi phones, please

update your Mi phone to the latest stable version.

●Connection interrupted

When your device is out of wireless range of the earphones or its Bluetooth function is disabled, the

earphones will automatically enter the awaiting connection mode. If the earphones are not

connected to any device within five minutes, they will enter sleep mode.

●Automatic connection

When the earphones are in the charging case, opening the lid of the charging case will automatically

connect the earphones to the most recently used Bluetooth device. If the earphones are not

connected to any device within five minutes, they will enter sleep mode.

Note: If the earphones cannot automatically connect to a device, you will need to manually connect

the earphones to the desired device via the device's Bluetooth settings.

●Clearing connection history

1. Place the earphones into the charging case.

2. Press and hold the charging case's function button for at least 10 seconds, and release it once

the charging case's indicator lights up.

The earphones have been reset, the old connection history has been cleared, the charging case's

indicator blinks, and the earphones are in pairing mode again.

Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4 GHz

electromagnetic signal interferences, there may be occasional disconnects or no sound.

Function Overview

Incoming calls

Gently tap either one of the earphones twice: Answer/End calls

Music and voice assistant

While wearing both earphones:

Gently tap the right (R) earphone twice: Play/Pause music

Gently tap the left (L) earphone twice: Wake up the voice assistant

Press and hold either one of the earphones: Cycle through the Noise

cancellation on > Transparency mode > Wind noise cancellation >

Noise cancellation off

Taking out an earphone: Pause music

While wearing one earphone:

Gently tap the earphone twice: Play/Pause music

Notes:

1. The voice assistant function can be used only if your device

supports it, and this function needs to be granted permission on

the device.

2. When only using the left earphone, place the right earphone into

the charging case and close the lid.

3. The noise cancellation mode is not available in single earphone

mode.

4. The wind noise cancellation mode reduces the effects of wind

noise during noise cancellation.

Specifications

Name: Wireless Earphones

Model: TWSEJ10WM Net Weight: 58 g Charging Port: Type-C Impedance: 32 Ω

Earphone Input: 5 V 0.11 A Charging Case Input: 5 V 1 A

Charging Case Output: 5 V 0.25 A Wireless Connectivity: Bluetooth 5.0

Bluetooth Profiles: BLE/HFP/A2DP/AVRCP Supported Audio Codecs: SBC/AAC

Wireless Range: 10 m (open space without obstacles)

Charging Time: Approx. 1 h (using wired charging)

Earphone Battery Life: Approx. 6 h (while active noise cancellation is disabled)

Total Battery Life (with charging case): Approx. 30 h

Bluetooth Operation Frequency: 2402–2480 MHz (for EU)

Maximum Transmit Power for BT: ＜13 dBm (for EU)

Maximum Transmit Power for BLE: ＜13 dBm (for EU)

Wireless Charging Operating Frequency: 110–205 kHz

Storage Temperature: -20°C to 45°C Storage Humidity: 5%–95% RH

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in

directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead,

you should protect human health and the environment by handing over your waste

equipment to a designated collection point for the recycling of waste electrical and

electronic equipment, appointed by the government or local authorities. Correct disposal and

recycling will help prevent potential negative consequences to the environment and human health.

Please contact the installer or local authorities for more information about the location as well as

terms and conditions of such collection points.

Hereby, Tiinlab declares that the radio equipment type TWSEJ10WM is in compliance with

Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the

following internet address: http://www.mi.com/global/service/support/declaration.html

Safety Caution

· Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.

· Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire,

explosion, leakage of corrosive electrolyte etc).

· Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that

can result in an explosion.

· Leaving a battery in an extremely high temperature surrounding environment that can result in an

explosion or the leakage of flammable liquid or gas.

· A battery subjected to extremely low air pressure that may result in an explosion or the leakage of

flammable liquid or gas.

· Risk of explosion if battery is replaced by an incorrect type.

· Dispose of used batteries according to the instructions.

· The product operation maximum ambient temperature is 40°C.

WARNING: To avoid risk of fire, please just connect the product to a power supply of which output

complies with requirements of PS1 defined in IEC/EN/UL 62368 standards (output capability is less

than 15W).

To prevent possible hearing damage, do not listen at high volume levels for long periods.

The symbol indicates DC voltage

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and

any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those

of their respective owners.

The Qi logo is a trademark of the Wireless Power Consortium.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tiinlab Corporation

(a Mi Ecosystem company)

Address:

No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan District, Shenzhen, China

For further information, please go to www.mi.com

Importer:

Beryko s.r.o.

Na Roudné 1162/76, 301 00 Plzeň

www.beryko.cz

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Xiaomi Cuffie

Xiaomi

Xiaomi Mi True TWSEJ03WM Manuale utente

Xiaomi

Xiaomi Mi In-Ear Headphones PRO Manuale utente

Xiaomi

Xiaomi Mi True 2 Basic Manuale utente

Xiaomi

Xiaomi Redmi Buds 3 Lite Manuale utente

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Basic Manuale utente

Xiaomi

Xiaomi Mi Sports Manuale utente

Xiaomi

Xiaomi Redmi AirDots Manuale utente

Xiaomi

Xiaomi Mi In-Ear Headphones Pro 2 Manuale utente

Xiaomi

Xiaomi Mi Sports Bluetooth Earphones Manuale utente

Xiaomi

Xiaomi Mi Sports Manuale utente

Xiaomi

Xiaomi Redmi Buds 3 Manuale utente

Xiaomi

Xiaomi Mi True Wireless Earphones TWSEJ01JY Manuale utente

Xiaomi

Xiaomi Mi Quantie Pro Manuale utente

Xiaomi

Xiaomi Mi AirDots Manuale utente

Xiaomi

Xiaomi Mi 2S Manuale utente

Xiaomi

Xiaomi Redmi Buds 4 Lite Manuale utente

Xiaomi

Xiaomi Buds 3T Pro Manuale utente

Xiaomi

Xiaomi Redmi Buds 3 Pro Manuale utente

Xiaomi

Xiaomi MI Redmi Bud 3 Pro Manuale utente

Xiaomi

Xiaomi Redmi Buds 4 Lite Manuale utente

Xiaomi

Xiaomi Mi True Wireless Earphones 2 Basic Manuale utente

Xiaomi

Xiaomi One More Manuale utente

Xiaomi

Xiaomi Mi True Wireless Earbuds TWSEJ02LM Manuale utente

Xiaomi

Xiaomi Buds 3 Star Wars Edition Manuale utente

Manuali Cuffie popolari di altre marche

Sony

Sony MDR-NC8 Manuale utente

AUSounds

AUSounds AU-Stream Manuale utente

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuale utente

Philips

Philips SHE3622 Manuale utente

Insignia

Insignia NS-CAHBTSPORT Manuale utente

Movie Vision

Movie Vision HP-400 Manuale utente

MobiFren

MobiFren SM Pro Manuale utente

Motorola solutions

Motorola solutions PMLN8120 Manuale utente

Jaybird

Jaybird freedom Guida all'installazione

Sony

Sony MDR-ED12LP Manuale utente

HiFuture

HiFuture Tidy Buds Pro Manuale utente

Creative

Creative CB2530 Manuale utente

Renkforce

Renkforce RF FTVK-100 Manuale utente

Philips

Philips SHQ3000 Manuale utente

Sennheiser

Sennheiser 500371 Manuale utente

Califone

Califone 2924AV Manuale utente

Philips

Philips EARGEAR HE205 Series Manuale utente

Technics

Technics EAH-AZ80 Manuale utente