Xterasys Wireless LAN Card Manuale utente
802.11g
WirelessLANCard
User’s Manual
Doc. No.:120903-01
REGULATORY STATEMENTS
FCC Certification
The United States Federal Communication Commission (FCC) and the
Canadian Department of Communications have established certain rules
governing the use of electronic equipment.
Part15, Class B
This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interface, and
2) This device must accept any interface received, including interface that may
cause undesired operation. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
◗Reorient or relocate the receiving antenna.
◗Increase the distance between the equipment and receiver.
◗ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
CAUTION:
1) To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm must be maintained between the antenna of this
device and all persons.
2) This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Table of Contents
INTRODUCTION......................................................................................1
WIRELESS NETWORK OPTIONS ................................................................. 1
The Peer-to-Peer Network............................................................ 1
The Access Point Network........................................................... 2
LED INDICATORS FOR WIRELESS CARDBUS CARD.................................. 3
Power Indicator: (Orange LED)................................................... 3
Act Indicator: (Green LED) ......................................................... 3
INSTALLATION.......................................................................................4
INSTALL THE DRIVER & UTILITY.............................................................. 4
INSTALL THE DEVICE................................................................................. 7
Note for Windows 98 users:......................................................... 7
Note for Windows 2000 users:..................................................... 8
Note for Windows XP users:........................................................ 8
Verify Device Installation............................................................ 9
NETWORK CONNECTION.................................................................. 11
IN WINDOWS 98/ME............................................................................... 11
IN WINDOWS 2000/XP............................................................................ 14
CONFIGURATION................................................................................. 17
THE NETWORK STATUS ICON.................................................................. 17
ACCESSING THE CONFIGURATION UTILITY............................................. 18
MAIN TAB............................................................................................... 19
ADVANCED TAB ..................................................................................... 24
PRIVACY TAB ......................................................................................... 24
STATISTICS TAB...................................................................................... 28
ABOUT TAB ............................................................................................ 28
UNINSTALLATION...............................................................................30
INTRODUCTION
The 802.11g Wireless LAN Card is a device that allows you connect
your computer to a wireless local area network (LAN). A wireless LAN
allows your system to use wireless Radio Frequency (RF) technology to
transmit and receive data without having to physically attach to the
network. The Wireless protocols that come with this product ensure data
security and isolation from interference generated by other radio
frequencies.
This card also allows you to take full advantage of your computer’s
mobility with access to real-time information and online services anytime
and anywhere. In addition, this device eliminates the bother of pulling
cable through walls and under furniture. It even allows you to place your
system in locations where cabling is impossible. Modifying and
augmenting networks has never been so easy.
Wireless Network Options
The Peer-to-Peer Network
This network installation lets you set a small wireless workgroup easily
and quickly. Equipped with wireless PC Cards or wireless PCI, you can
share files and printers between each PC and laptop.
- 1 -
- 2 -
You can also use one computer as an Internet Server to connect to a wired
global network and share files and information with other computers via a
wireless LAN.
The Access Point Network
The network installation allows you to share files, printers, and Internet
access much more conveniently. With Wireless LAN Cards, you can
connect wireless LAN to a wired global network via an Access Point.
- 3 -
LED Indicators For Wireless CardBus Card
Power Indicator: (Orange LED)
This LED will illuminate when the driver is well-installed.
Act Indicator: (Green LED)
This LED flickers when transmitting/receiving wireless data.
INSTALLATION
Caution: Do not insert the Wireless LAN Card into your computer
until the procedures in “Install the Driver & Utility” has been
performed.
Install the Driver & Utility
3. Exit all Windows programs. Insert the CD-ROM into the CD-ROM
drive of your computer.
If the CD-ROM is not launched automatically, go to your CD-ROM
drive (e.g. drive D) and double-click on Setup.exe.
4. The main screen of the CD-ROM opens. Click Driver & Utility
Installation to start the installation.
- 4 -
5. When the Welcome screen appears, click Next to continue.
6. The Choose Destination Location screen will show you the default
destination chosen by the utility. Click Next to continue.
- 5 -
7. Follow the instruction to select the program folder. Click Next to
continue.
8. Click Finish to complete the installation
- 6 -
Indice
Altri manuali Xterasys Scheda di rete
Manuali Scheda di rete popolari di altre marche
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuale utente
National Instruments
National Instruments NI 9234 Manuale utente
Hama
Hama 49276 Manuale utente
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo
Compaq
Compaq Wireless LAN 100 Manuale utente
Bose
Bose PowerMatch Dante Manuale utente