XYZ Printing PartPro200 xTCS Manuale utente

Safety Precautions 2

Product Descriptions 3

Unpacking and Installation 5

Touch Screen Menu, Functions and Messages 7

Function Operation and Instructions 8

Printing 21

Scanning 22

Support detail 25

User manual ENG

The manual is mainly intended for users to understand how to use the

PartPro200 xTCS 3D printer (“200 xTCS”) correctly. In this manual,

users can learn more about the operating tips, application skills and

maintenance of the 200 xTCS 3D printer.

New member is required to register account on http://support.

xyzprinting.com before able to download latest manual &

software for better user experience.

For more information on the 200 xTCS, please contact your local

dealer or visit the ofcial website of XYZprinting: http://www.

xyzprinting.com.

HD23FC1S166

PartPro200 xTCS

P2P2

Safety Precautions

Safety and Compliance

Important Safety Precautions

Trademarks

Maintenance and Service

CAUTION

Heavy object.

2 person lift

required

Watch Your Hands.

●Do not move the machine by yourself as it is heavy.

●Do not place the printer in a dusty, humid or outdoor environment.

●Do not place the printer on a soft or tilted surface. Otherwise, the machine will fall / ip over and become damaged or

cause personal injury.

● Do not leave the product or power cord to unattended children. Otherwise, personal injury or electric shock might occur.

●Use the provided power cord. Otherwise, incorrect grounding might lead to damage.

●Do not place any liquid container on top of the product. Otherwise, overow or spill might go into the machine and pose

the risks of danger or safety concern.

●Do not wipe the printer with alcohol or ammable chemicals. Otherwise, danger might occur.

●Do not move the machine when it’s powered on.

●Do not reach into the machine with your hands during operation. Otherwise, risks of impact from moving printing parts or

burn from high temperature might occur.

●The machine becomes hot during operation and thus run in high temperature. Do not touch or replace parts when they

are not cooled down.

●After startup, the parts in the machine will heat up or move depending on the user’s instructions. During product

operation, do not touch or block the operation of the parts.

●Weak odors may be generated during the printing process. We recommend working in a well-ventilated and open area to

ensure operational comfort.

●Defect reparation must be carried out according to the contents of this instruction manual. Where the defect cannot be

repaired, please contact your printer dealer or the customer service center.

When the printer needs to be serviced during the term of the warranty, it is recommended that the machine is packed with

original packaging materials prior to shipment. For this purpose, the packaging materials are better to be kept. If other

packaging materials are used instead, the printer might be damaged during transportation. We reserve the right to assess

relevant service fees.

Please read through this manual and all safety precautions carefully before using, operating, unpacking, replacing, remov-

ing any part or maintaining this product. Please also comply with the instructions of relevant safety precautions.

All trademarks and registered trademarks are the properties of their respective owners.

P3P3

Product Descriptions

Product exterior

1. 5 inch color touch panel 2. Auto-feeding module 3. Print head 4. Print bed+EZ removable rubber magnet

5. Scan module 6. Filament spool holder 7. USB Port 8. USB Port (WiFi dongle)

9. Power switch 10. USB Port (To PC) 11. Power jack

P4P4

Product Descriptions

Specications

The following tools are intended for use under the guidance or guardianship of an adult only. Do not allow children unfamiliar with the

tools to have access to them in case of danger.

●Make sure the maintenance work of the printer is carried out when the print bed has cooled down.

●When printing is completed and the print bed is cooled down to room temperature, the printed object can be removed from the print bed

with the scraper.

●Filament residues generated during the course of printing may be stuck on the print head and gears of the printing module. The printing

quality and printer operation as well as the measurement of the print bed may be affected. When this happens, clean the printing

module with the wire brush.

31 2 4 5 1. Scraper

2. Wire brush

3. Gear cleaning brush

4. Feed hole cleaning wire

5. Print head cleaning wire

Precautions and Instructions of Maintenance Tools

Accessory Checklist

1 2 3 4

5 6

12 13 1514

7 8

9 10

1. User Manual 5. USB Cable 9. PC Mylar x 2pcs 13. Clear Tube

2. USB Drive 6. EZ Removable Rubber Magnet 10. Mask Tape x 3pcs 14. Calibrating Plate

3. 3D Color-inkjet PLA 7. Top Cover 11. WiFi Dongle 15. Scan Backboard

4. Power Cord 8. Guide Tube 12. Pair Of Gloves

Printing

Printing technology 2D pattern: Inkjet printing

3D structure: Fused lament fabrication (FFF)

Dimensions and Weight

Dimensions (W*D*H) 600* 581* 640 mm

Net weight 32 Kg

Gross weight 43 Kg

Performance

Printing dimensions (W*D*H) Mono color printing (without inkjet printing)

200 x 200 x 150 mm

Full color printing

185 x 185 x 150 mm

Thickness of printed layer 0.1 mm ~0.4 mm

Alignment precision X/Y : 0.0125 mm

Auto calibration Yes

Auto feeding Yes

Ofine standalone printing Yes

Materials

3D printing materials 3D Color-inkjet PLA, PLA, Tough PLA, PETG

Filament diameter 1.75 mm

Ink type CMYK cartridge with separate colors

Hardware

Print head diameter 0.4mm

User interface 5” color touch screen

Print bed Non-heated, removable

Transmission USB 2.0 drive / USB cable / wireless transmission

Software

User software XYZmaker

Supported le format AMF, OBJ, STL, XYZ Format (.3w), .3CP, .3MF

Operating system Mac OS X 10.10 / 10.11 / 10.12

Windows 7 /8/10 (64-bit)

Temperature

Machine operating temperature 15-30°C

Cartridge storage temperature 15-35°C

Filament storage temperature 0-38°C

P5P5

Unpacking and Installation

Remove the packaging materials, top cover box, assessory box and plastic cover.

Move the printer to a table or plat-

form. (Do not move the printer by

yourself as it is heavy.)

Remove the plastic wrap and PP.

Remove the foam next to the guide screws on both sides, and then remove the foam under

the print bed.

Remove the tape on the

body (4 in total).

Open the front door. Remove

the tape from the supporting

materials and print bed.

Remove the foam on the

cartridge holder.

Open front door, remove the tape at mark printer door

post.

Remove the cable tie and foam in front and back of the front

door.

P6P6

Unpacking and Installation

There is a sheet of PC lm to

rubber magnet with a double

sided adhesive, this PC lm is

replaceable, please replace it

when it's dirty or broken.

Note

1. Check if the print bed calibration screws

was stuck.

2. Used to 2 thumb to push up the printbed

to release the calibration screw.

Precautions

Conrm the rubber magnet is well placed on the print bed.

Please follow the order as image instruction, attach the PC

mylar (accessory 9) and mask tape(accessory 10) on the EZ

removable rubber magnet(accessory 6).

Ensure that the one end of guide tube(Accessory 8) has been tightly. inserted into the printing module

port, then insert the other end into the clear tube (Accessory 13) to the end.

Mask Tape

PC Mylar

EZ Removable

Rubber Magnet

11 12

Insert the other end of the guide tube into the feed module

and secure it tightly.

Feed the guide tube through the top cover then attach the

top cover to the machine.

P7P7

Touch Screen Menu, Functions and Messages

This includes Filament, Ink Load

and Unload.

Filament/Ink loading

and unloading

This menu can be used to import

les (.3cp) from a USB drive to the

machine for printing without a com-

puter.

This includes the functions in Home

Page 1:

Settings of the Print-Bed, Print-

Head, Filament, Ink and Scan

Module.

Next page includes

WiFi, Sound, Statistics, Language

and Display.

The last page includes

Model, Version, Reset and Legal

Info.

Settings

USB Printing Menu

Main screen

P8P8

Function Operation and Instructions

2. Place the lament on the

spool holder.

1. Please cut the lament at 45

angle before auto loading the

lament into the printer. During

loading lament process, the

lament should be straighten at

least 4” of the Filament end as

shown in pictures.

A. Load/unload laments

Make sure the lament rotates

clockwise when pulled.

Note

3. Tap Filament Load and

Unload in the main screen and

select Filament.

4. Tap Filament.

5. Tap Load. 6. Conrm the operation. 7. Insert the lament into the feed module, it will be automatically loaded.

8. Check if the temperature of the print head goes up to its operating temperature (Color PLA from

XYZprinting) after the lament is loaded. Once the set temperature is reached, the feeding motor will

feed the lament along the guide tube into the print head.

9. Once lament has extruded

from the print head, the lament

will be successfully loaded.

Tap the screen to conrm and

continue.

Load laments

A1 Filament

Unloading laments

A2 Filament

1. Tap Filament Load and

Unload on the main screen.

2. Tap “Unload” and conrm the

operation.

3. Conrm the unloading

operation.

4. When the print head has

been warmed up to 220 °C,

the feeding motor will eject the

lament.

5. When the unloading

operation completes, tap to

conrm.

P9P9

Function Operation and Instructions

200 xTCS will prompt you to rell material.

Rell Material

A3 Filament

Unload the prints

1. Check if the USB drive is

plugged to the machine.

2. Tap the USB Printing Menu in

the main screen.

3. Select the file you want to

print.

5. The screen will show the

print percentage when printing.

The Pause, Stop, and Rell

are shown below the print

percentage.

4. Check file information and

tap “Print”.

B. USB printing

By default, the front door will be

locked when printing. If you want to

change this setting, go to Setting >

Door Lock to change it.

Note

Please removed the EZ Removable Rubber Magnet with printed object together from the printer.And

peel off the printed object from the rubber magnet.

Please avoid touch-

ing the led strip of the

printer because the

LED strip will be slight

hot due to long hours

of been light on.

1. Tap the icon when printing.

7. The lament will be

automatically loaded.

5. Replace the empty spool with a new one. (please refer to the

LOADING section in this manual) and then tap "PROCEED" .

2. The screen will show lament

status, please tap "Rell" .

8. Check if lament is extruded from the nozzle, after conrmation,

the printer will resume printing.

3. Conrm the operation.

6. The nozzle will be preheat and notify you when to insert lament

into the feed module.

4. The nozzle will be preheated

and the lament will be

unloaded automatically.

P10P10

The 200 xTCS uses four color inks which can be replaced separately.

C. Ink Cartridge Installation

Function Operation and Instructions

1. Prepare several paper towels and the

ink cartridge.

2. Unpack the ink cartridge. 3. Remove the cartridge cover.

Ink Guidance

6. Check if the ink transferred to the

paper towel displays two straight lines.

If so, ink guidance is successfully

completed. Once ink guidance is done,

install the ink cartridge.

4. Press the cartridge head against the

paper towel to transfer some ink onto it.

5. If the ink did not transfer well, try

putting the paper towel on the table and

hold the ink pressed on the paper towel.

7. If the ink did not transfer well, please

wet the paper towel with 75% Alcohol to

wipe the ink. After you clean the inkjet,

check to see if the ink transferred.

To prevent the opened ink cartridge from drying out when a print is

nished or the printer will be idle for days, follow the procedure to store

the cartridge:

1. Clean the nozzle of the ink cartridge with alcohol.

2. Seal the ink cartridge with the protective cover, and store the cartridge

in room temperature at 15 ~ 35 degree.

For the best print quality, clean the nozzle of the cartridge with alcohol

after removing the protective cover from the cartridge, and then install the

cartridge back to the printer before the next print.

Note

Indice

Lingue:

Altri manuali XYZ Printing Stampante 3D

XYZ Printing

XYZ Printing da Vinci Super Manuale utente

XYZ Printing

XYZ Printing Nobel Superfine Manuale utente

XYZ Printing

XYZ Printing da Vinci 1.0 Pro Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr.1.0w Manuale utente

XYZ Printing

XYZ Printing da Vinci Pro EVO Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr.1.0w Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr. WiFi Pro Manuale utente

XYZ Printing

XYZ Printing da Vinci Color mini Manuale utente

XYZ Printing

XYZ Printing da Vinci 2.0 Duo Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr. 1.0 Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr.1.0A Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr.1.0 Manuale utente

XYZ Printing

XYZ Printing PartPro300 xT Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr. WiFi Pro Manuale utente

XYZ Printing

XYZ Printing da Vinci 1.0 Manuale utente

XYZ Printing

XYZ Printing da Vinci Mini Series Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr. 1.0 Manuale utente

XYZ Printing

XYZ Printing da Vinci 1.0 Pro Manuale utente

XYZ Printing

XYZ Printing ds Vinci Color Manuale utente

XYZ Printing

XYZ Printing da Vinci 1.0 Manuale utente

XYZ Printing

XYZ Printing Nobel Superfine Manuale utente

XYZ Printing

XYZ Printing da Vinci Jr 1.0 Pro Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente