Yamaha FZ-16 Manuale utente

1ES-F8107-E0

2010

FZ 16

ASSEMBLY MANUAL

First Edition

Any reproduction or unauthorized use

without the written permission of

India Yamaha Motor Pvt. Ltd.

is expressly prohibited.

Printed in India

This Assembly Manual contains the information required for the correct assembly of this motorcycle prior to

delivery to the customer. Since some external parts of the motorcycle have been removed at the YAMAHA

factory for the convenience of packing, assembly by the YAMAHA dealer is required. It should be noted that the

assembled motorcycle should be thoroughly cleaned, inspected and adjusted prior to delivery to the customer.

FOREWORD

NOTICE

The service specifications given in this assembly manual are based on the model as manufactured. India

Yamaha Motor Pvt. Ltd. is continually striving to improve all of its models. Modifications and significant changes

in specifications or procedures will be forwarded to all authorized YAMAHA dealers and will appear in future

editions of this manual where applicable. The procedures below are described in the order that the procedures

are carried out correctly and completely. Failure to do so can result in poor performance and possible harm to

the motorcycle and/or rider. Particularly important information is distinguished in this manual by the following

notations.

WARNING

NOTICE

TIP:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

A WARNING indicates as hazardous situation which, if not avoided, could result in death or

serious injury.

A NOTICE indicates special precautions that must be taken to avoid damage to the vehicle

or other property.

ATIP provides key information to make procedures easier or clearer.

INDEX

1. SYMBOLS USED IN THE ASSEMBLY MANUAL …………............................................

2. UNPACKAGING ………………………………………………………………………………..

3. PARTS LOCATION ………………..……………..............................................................

a. Carton A ……………………………………………………………...…….

b. Carton B…………………………………………………………………...…

c. Carton C ……………………………………………………………………..

d. Carton D………………………………………………….……………....….

e. Bubble wrap ………………………………………………..……………….

4. HARDWARE IN CARTON B ………………………………………………………………..

5. SETUP & PRE-DELIVERY CHECKLIST .......................................................................

6. SETUP PROCEDURE …………………….…………………..…………………....…….….

a. Front fender …………………………..……….…………………...............

b. Front wheel …………………………………………………….…………….

c. Handlebar assy. ………………………………………………………….….

d. CDI unit ………………………………………………………………….……

e. Seat ……………………………………………………………..…………….

f. Rear view mirror ………………………………………………………..…….

7. CABLE ROUTING ..........................................................................................................

8. ADJUSTMENTS AND PRE-DELIVERY SERVICE…………………………...………...…

a. Checking and charging the battery .........................................................

b. Measuring the tire pressure ....................................................................

c. Checking the engine oil level ..................................................................

d. Adjusting the engine idling speed ...........................................................

e. Adjusting the throttle cable free play .......................................................

f. Adjusting the rear brake free play ............................................................

g. Adjusting the rear brake light switch .......................................................

h. Adjusting the clutch cable free play ………………………………….......

i. Adjusting the drive chain slack ................................................................

j. Adjusting the headlight beam ...................................................................

9. APPENDICES …………………………………………………………………………………

a. Service data…………………………………………………………………..

10. TIGHTENING TORQUES...............................................................................................

SYMBOLS USED IN THIS MANUAL

In order to simplify descriptions in this assembly manual, the following

symbols are used:

(1): Coat with lithium-soap-based grease.

(2): Tighten to 10 Nm.

(10 Nm = 1.0 m · kg, 7.2 ft · lb)

(3): Towards the front of the motorcycle

(4): Clearance required

(5): Install so that the arrow mark faces upward.

(6): Apply motor oil.

(7): Made of rubber or plastics

(8):

A: Ref. No. (indicating the order of operations.)

B: Place where parts are held

V: Stored in plastic bag/Bubble Sheet

C: Stored in carton box

S: Fixed inside the steel frame/wooden

frame and/or contained in the Styrofoam

tray (upper or lower)

*: Temporarily installed or secured

C: Quantity of parts per motorcycle

D: Size or material of parts

d/D: Diameter of part

l: Length of part

e.g., 5 (0.20)=5mm(0.20 in)

To assemble the motorcycle correctly, supplies (e.g., oils, greases,

and shop rags) and sufficient working space are required.

Workshop

The workshop where the motorcycle is assembled should be clean,

spacious, and have a level floor.

Self-protection

Protect your eyes with suitable safety glasses or goggles when using

compressed air, when grinding or when doing any operation which

may cause particles to fly off.

Protect hands and feet by wearing safety

gloves or shoes.

PREPARATION

1. Remove all the strips from all the corners & Top

cover “1”.

2. Remove the Front wheel “2” by untagging Its

cords.“1”.

3. Remove Wooden angles “3”

4. Remove Side covers “4”

5. Remove front cover “5”.

6. Remove the nut “6” in order to remove the front

wheel assy. from the packing box..

7. Remove the polythene cover “7”.

UNPACKAGING

8. Untag & remove the loosen parts kept on the vehicle.

9. Remove all the carton boxes “8”.

10. Remove the wooden support bracket “9” from the

mounting bracket “10”.

11. Remove mounting bracket by removing the bolt “11”

from seat handle..

12. Tighten the bolt”11” at its original position.

12. Remove carton box “12” from the rear side of the

vehicle by untagging its cord.

13. Remove handlebar “13” from both the side of rear

wheel of both motorcycle.

14. Remove the carton box “14” placed over frame at

the area of rider seat.

15. Remove the axle nut “15” from the front fork, and

then remove the axle bolt from wooden bracket “16”.

HARDWARE IN CARTON “B”

S. No. PART NO. / DESCRIPTION QTY. Illustration

1. 97027-06020 2 EACH

BOLT HEX

2. 90154-06061 2 EACH

SCREW CROSS RECESS

3. 90387-068C5 4 EACH

COLLAR

4. 90201-6726 2 EACH

WASHER PLAIN

5. 21C-F5183-00 2 nos.

COLLER WHEEL SHAFT

6. 95827-08016 2 nos.

BOLT FLANGE

7. 36L-H3936-00 2 EACH

BAND SWITCH CORD

8. 1ES-F8199-S0 2 nos.

MANUAL OWNERS

9. 21C-F6280-00 2 nos.

MIRROR ASSY 1

10. 21C-F6290-00 2 nos.

MIRROR ASSY 2

11. 21C-H5540-00 2 nos.

CDI UNIT ASSY

S. No. PART NO. / DESCRIPTION QTY. Illustration

12. 21C-F8100-10 2 EACH

TOOL KIT

Altri manuali per FZ-16

Indice

Altri manuali Yamaha Motociclo

Yamaha

Yamaha YP250A 1999 Manuale

Yamaha

Yamaha XSR900 2022 Manuale utente

Yamaha

Yamaha MX360 Manuale

Yamaha

Yamaha FZR600RA Manuale

Yamaha

Yamaha 2001 V Star XVS1100AM Manuale utente

Yamaha

Yamaha FJR1300R Manuale utente

Yamaha

Yamaha XJR1300M Manuale utente

Yamaha

Yamaha WR250FM 2021 Guida all'applicazione

Yamaha

Yamaha FAZER FZS600 Manuale utente

Yamaha

Yamaha Tenere 700 2023 Manuale utente

Yamaha

Yamaha XMAX BUSINESS Edition 2010 Manuale utente

Yamaha

Yamaha Tenere 700 Manuale utente

Yamaha

Yamaha YZF-R6 Manuale utente

Yamaha

Yamaha yz250 2015 Manuale utente

Yamaha

Yamaha XT660RW 2007 Manuale

Yamaha

Yamaha 1993 XV535E Manuale utente

Yamaha

Yamaha WR250F(P) Guida all'applicazione

Yamaha

Yamaha TW200B Manuale utente

Yamaha

Yamaha YS125-5C 2016 Manuale utente

Yamaha

Yamaha XT250W Manuale utente

Yamaha

Yamaha Royal Star XVZ1300A Manuale utente

Yamaha

Yamaha YP400T Manuale utente

Yamaha

Yamaha 2000 V Star XVS650AM Manuale utente

Yamaha

Yamaha YZF-R6 Manuale utente

Manuali Motociclo popolari di altre marche

OHVALE

OHVALE GP-0 Manuale elenco delle parti

KTM

KTM 350 XCF-W USA Manuale utente

HYOSUNG

HYOSUNG ST7 Manuale utente

Husqvarna

Husqvarna FC 250 2016 Manuale utente

Ducati

Ducati SCRAMBLER 800 Manuale di istruzioni

MOTO GUZZI

MOTO GUZZI QUOTA 1100 ES Manuale utente

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Manuale utente

KTM

KTM Freeride E-XC 2021 Manuale utente

Fantic

Fantic Enduro 125 Manuale utente

Ducati

Ducati Supersport 750 desmodue Manuale utente

MV Agusta

MV Agusta 2008 F4 312RR 1078 Manuale di istruzioni

Ducati

Ducati 748 monoposto strada Manuale utente

ATK

ATK 1988 250 Manuale utente

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Manuale utente

Triumph

Triumph Thunderbird Manuale utente

Ducati

Ducati 996 Manuale utente

BMW

BMW MOTORRAD K 1200 R Sport Manuale di installazione e manutenzione

BMW Motorrad

BMW Motorrad G 650 GS 2007 Manuale di installazione e manutenzione