YASKAWA Drive-V1000 Manuale utente
MANUAL NO. TOBP C730600 29A
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end user
receives this manual.
Installation Manual
LCD Operator
YASKAWA AC Drive-V1000 Option
Type JVOP-180
2YASKAWA
TOBP C730600 29A V1000 Option LCD Operator Installation Manual
Copyright © 2007 YASKAWA ELECTRIC CORPORATION
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written
permission of Yaskawa. No patent liability is assumed with respect to the use of the information contained herein.
Moreover, because Yaskawa is constantly striving to improve its high-quality products, the information contained in
this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual.
Yaskawa assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from
the use of the information contained in this publication.
YASK AWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual 3
Table of Contents
1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 LCD OPERATOR OPTION COMPONENTS. . . . . . . . . . . . . 12
5 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . .20
6 BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7 RELATED PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . 33
8 LCD OPERATOR OPTION FAULT DIAGNOSTICS. . . . . . . 35
9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
4 YASKAWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
1 Preface and Safety
1 Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems
and equipment. The selection and application of Yaskawa products remain the responsibility
of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its
products are incorporated into the final system design. Under no circumstances should any
Yaskawa product be incorporated into any product or design as the exclusive or sole safety
control. Without exception, all controls should be designed to detect faults dynamically and
fail safely under all circumstances. All systems or equipment designed to incorporate a
product manufactured by Yaskawa must be supplied to the end user with appropriate
warnings and instructions as to the safe use and operation of that part. Any warnings
provided by Yaskawa must be promptly provided to the end user. Yaskawa offers an express
warranty only as to the quality of its products in conforming to standards and specifications
published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESSED OR IMPLIED,
IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage,
losses, or claims arising from misapplication of its products.
1 Preface and Safety
YASK AWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual 5
◆Applicable Documentation
The following manuals are available for the JVOP-180 LCD Operator Option:
For the drive setup, refer to the drive Quick-Start Guide or Technical Manual.
◆Terms
LCD Operator
V1000 Option LCD Operator Installation Manual
Read this manual first.
The installation manual is packaged with the LCD Operator Option and
contains a basic overview of wiring, settings, functions, and fault
diagnoses.
Yaskawa Drive
Yaskawa AC Drive-V1000
Technical Manual
To obtain instruction manuals for Yaskawa
products access these sites:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: https://www.e-mechatronics.com
Other areas: contact a Yaskawa representative.
For questions, contact the local Yaskawa sales
office or the nearest Yaskawa representative.
Yaskawa AC Drive-V1000
Quick Start Guide
Drive: Yaskawa AC Drive -V1000 Series.
LCD Operator Option: JVOP-180 LCD Operator unit for the Yaskawa V1000 drive.
Note: Indicates a supplement or precaution that does not cause drive damage.
≥1012: Indicates a drive feature or function that is only available in drive software
version 1012 or greater.
LED: Light emitting diode.
LCD: Liquid crystal display.
STOP
(Hz)
(Hz)
(A)
(V)
:
:
:
:
:
:
:
:
:
:
V1000
周波数指令
正転逆転選択
出力周波数
出力電流
出力電圧
モニタ
ベリファイ
セットアップ
パラメータ設定
オートチューニング
据え付け、運転の前には必ず取扱説明書を読むこと。
通電中および電源遮断後
5
分以内はフロントカバーを
外さないこと。
400V
級インバータの場合は、電源の中性点が接地
されていることを確認すること。（ 対応）
けが、感電のおそれがあります。
危 険
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
1 Preface and Safety
6YASK AWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
◆Registered Trademarks
Company names and product names listed in this manual are the registered trademarks of
those companies.
◆Supplemental Safety Information
Read and understand this manual before installing, operating or servicing this option unit.
The option unit must be installed according to this manual and local codes.
The following conventions are used to indicate safety messages in this manual. Failure to
heed these messages could result in serious or possibly even fatal injury or damage to the
products or to related equipment and systems.
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious
injury.
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates an equipment damage message.
1 Preface and Safety
YASK AWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual 7
■General Safety
General Precautions
• The diagrams in this section may include option units and drives without covers or safety shields to
illustrate details. Be sure to reinstall covers or shields before operating any devices. The option board
should be used according to the instructions described in this manual.
• Any illustrations, photographs, or examples used in this manual are provided as examples only and
may not apply to all products to which this manual is applicable.
• The products and specifications described in this manual or the content and presentation of the
manual may be changed without notice to improve the product and/or the manual.
• When ordering a new copy of the manual due to damage or loss, contact your Yaskawa
representative or the nearest Yaskawa sales office and provide the manual number shown on the
front cover.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting
from failure to heed the warnings in this manual.
NOTICE
Do not expose the drive to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the option unit.
Do not pack the drive in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.
8 YASKAWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
2 Product Overview
2 Product Overview
◆About This Product
The LCD Operator Option provides an enhanced drive user interface that can operate the
Yaskawa drive at a short distance up to 3 meters. The LCD Operator Option can display
information in eight languages, including English, Japanese, and Spanish.The LCD Operator
Option is an LCD display that simplifies the task of interfacing with the drive to perform
these tasks:
• Read or modify drive parameters.
• Read and copy drive parameter settings to another Yaskawa drive.
• Operate the drive.
• Monitor drive operation status.
Note: When the LCD Operator Option is installed and connected to the V1000 it will cause the drives
built-in LED operator to display a series of dots as shown in Table 1. This is normal operation.
Additionally, all keys except for the STOP key on the drives built-in LED operator will not
function when the LCD Operator Option is connected. If desired, to also disable the STOP key
on the drives built-in LED operator, set parameter o2-02 (STOP Key Function Selection) to 0
(Disabled).
Table 1 Built-in LED Display Behavior with a Connected LCD Operator Option
Display LED Display Drive Status
Illuminated During Stop
Flashing During Run
2 Product Overview
YASK AWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual 9
◆Applicable Models
The LCD Operator Option can be used with the drive models in Tab le 2.
Table 2 Applicable Drive Models
Drive Drive Software Version <1>
<1> See “PRG” on the drive nameplate for software version number.
CIMR-VABA≥1012
CIMR-VAFA≥1012
CIMR-VAJA≥1012
10 YASKAWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
3 Receiving
3 Receiving
Perform the following tasks after receiving the LCD Operator Option:
• Inspect the LCD Operator Option for damage.
If the LCD Operator Option appears damaged upon receipt, contact the shipper
immediately.
• Verify receipt of the correct model by checking the model number printed on the Name
plate of the LCD Operator Option.
• If you have received the wrong model or the LCD Operator Option does not function
properly, contact your supplier.
◆Contents and Packaging
Table 3 Contents of Package
■Additional Part Required (Sold Separately)
Proper installation of the LCD Operator Option requires a communication cable. A
communication cable is not provided. A connection cable can be purchased from Yaskawa
or recommended LAN cables may be used. Refer to Table 4 for more information regarding
the cable required for your application.
Depending on the LCD Operator Option installation method, an installation support listed in
Table 4 may also be required. Refer to Installing the LCD Operator Option on page 21 for
more information regarding installation methods.
To order a cable or an installation support, contact Yaskawa directly or your nearest Yaskawa
distributor.
Description: LCD Operator Option Installation Manual
–
Quantity: 11
MANUAL
Indice
Altri manuali YASKAWA Azionamento CC
YASKAWA
YASKAWA PROFINET V1000 Manuale utente
YASKAWA
YASKAWA LA500 Manuale del proprietario
YASKAWA
YASKAWA HV600 Manuale per l'uso e la cura
YASKAWA
YASKAWA MECHATROLINK-III Manuale utente
YASKAWA
YASKAWA SI-P3V Manuale utente
YASKAWA
YASKAWA SI-EN3D Manuale utente
YASKAWA
YASKAWA iQpump Micro Manuale utente
YASKAWA
YASKAWA SI-B3 Manuale utente
YASKAWA
YASKAWA E-II Series Istruzioni per l'installazione
YASKAWA
YASKAWA CANopen SI-S3 Manuale utente
YASKAWA
YASKAWA T103 Manuale di istruzioni
YASKAWA
YASKAWA GA50U Series Manuale di istruzioni
YASKAWA
YASKAWA PROFINET V1000 Manuale operativo e di manutenzione
YASKAWA
YASKAWA CIMR-F7Z Manuale utente
YASKAWA
YASKAWA Varispeed f7 Manuale utente
YASKAWA
YASKAWA GA700 GA700 Series Manuale utente
YASKAWA
YASKAWA SGDV Manuale utente
YASKAWA
YASKAWA JOHB-SMP3 Manuale utente
YASKAWA
YASKAWA L1000H Manuale utente
YASKAWA
YASKAWA JOHB-SMP3 Manuale utente
Manuali Azionamento CC popolari di altre marche
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Manuale utente
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Manuale elenco delle parti
Chamberlain Garog
Chamberlain Garog D Series Manuale utente
Parker
Parker PDS Series Manuale utente
Festo
Festo DGC G Series Guida all'installazione
Binks
Binks QS-5012-1-CE Manuale utente
Rockwell Automation
Rockwell Automation PowerFlex 700S Manuale del proprietario
WEG
WEG DeviceNet CFW500 Manuale utente
Siemens
Siemens SINAMICS G Scheda tecnica
Siemens
Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Istruzioni operative
SOMFY
SOMFY JR RU 30 Manuale utente
Beckhoff
Beckhoff AX8911 Manuale dell'operatore