YippieYo CROSSBUGGY Manuale utente
INSTRUCTIONS FOR USE
FOR YOUR CROSSBUGGY
Dear Parents,
Congratulations on your purchase of a
YippieYo Crossbuggy!
You have selected a very high-quality product. The YippieYo Crossbuggy
meets the strict safety requirements in accordance with the European Stan-
dard for Pushchairs and Prams. In order to obtain the GS Certication for
tested safety the YippieYo was put through its paces in a tough endurance
test and rigorously examined for harmful substances. Every Crossbuggy is
handcrafted to the highest standard in Switzerland and Germany.
We are condent that the YippieYo Crossbuggy will offer you and your
family excellent service, every day and over a long period of time.
More freedom, more fun as a family, no matter how tough the terrain – that
is our goal.
Outdoors in the forest, in the mountains, in the park or in the city - it goes
wherever you go!
These instructions contain important information with regard to the correct
and safe use of your Crossbuggy. Please read the instructions carefully
and pay special attention to the safety information. Should you lend your
Crossbuggy to another person, please ensure that you also pass on this
instruction booklet.
Important: Keep this instruction booklet for later reference!
Hotline
Do you have any questions, comments or suggestions with regard to our
product or our company? Or do you require help in resolving a problem
with your Crossbuggy or your order?
Or give us a call and leave a message. We’ll get back to you as quickly as
possible.
Germany and EU: +49 (0)30 300 11 22 33 (landline telephone charges
Germany)
Switzerland: +41 (0)76 811 00 00 (mobile telephone charges Switzerland)
Postal address:
YippieYo AG
Kobiboden 63
CH-8840 Einsiedeln
Switzerland
List of contents:
1. Safety information ___________________________________ S. 1
2. Intended use _______________________________________ S. 3
3. Assembly __________________________________________ S. 4
3.1 Attaching and removing the wheels ________________ S. 4
3.2 Collapsing and pulling out the backrest _____________ S. 6
3.3 Collapsing and pulling out the pull-bar ______________ S. 7
3.4 Putting on and removing the seat covers____________ S. 8
3.5 Adjusting, tting and removing the safety harnesses __ S.10
4. Adjusting the disc brakes _____________________________ S.11
5. Care instructions ____________________________________ S.12
6. Disposal information _________________________________ S.12
7. Technical data ______________________________________ S.12
1
Edition: February 2016
1. Safety information
WARNING!
GENERAL SAFETY INFORMATION:
• Never leave your child unattended!
• Please only use the buggy with children over the age of 12 months who
can already sit alone without support.
• Use the restraint system at all times.
• This buggy is intended for maximum two children and luggage up to a
maximum total weight of 40 kg.
• The carrying rack and the buggy bag are intended to carry maximum
5 kg.
• Any load attached to the pull-bar, the back or on the side of the buggy
can affect the stability of the buggy.
• Do not let your child play with the buggy and do not let him/her climb
on the backrest.
• Do not sit on the carrying rack due to the risk of tipping over.
• In order to avoid the risk of injury, ensure that your child is well away
from the buggy when assembling it or folding it up.
• This product is not suitable for use as a bicycle trailer nor should it be
hooked onto any vehicle.
• This product is not suitable for jogging or inline/roller skating.
• When carrying the buggy lift it by the armrests and/or the seat frame
only. Do not lift it by the seat covers, the pull-bar or the nger-guard
elements.
• Use only accessories and spare parts authorised by the manufacturer.
• In order to avoid the risk of suffocation, ensure that the plastic pack-
aging material and the waterproof packaging material are out of reach
of babies and children
• The assembly and disassembly of the product must always be carried
out by an adult who is familiar with the operating instructions.
2
BEFORE YOU SET OFF:
• Before using the product, ensure that all the locking mechanisms are
closed:
- Ensure that the backrest is locked in place and that the two clips
around the back crossbar are closed.
- Ensure that the hinge joint on the pull-bar is locked in place and
secured with the cam lever.
- Ensure that both wheels are securely attached to the quick-release
axles in the axle tube and that both disc brakes are located between
the brake pads.
- After afxing the wheels, ensure that the hand brake/parking brake is
functioning correctly.
• Ensure that the seat cushion, the backrest cushion, the side bolsters
and the restraint system are properly attached to the buggy. The ex-
pander is for use on the carrying rack only.
• Children should only be allowed to get into/out of the buggy when it is
standing on a at surface and when it is fully assembled and ready to
use.
• Children should be helped into/out of the buggy by an adult.
• Always apply the parking brake when children are getting into/out of
the buggy and ensure that the buggy is steady and stable.
DURING THE RIDE:
• Use the restraint system at all times.
• The buggy should be pulled by adults only. Do not let children pull it.
• Never leave children unattended in the buggy. When you park the
buggy, apply the parking brake and take the children out of the buggy.
Never park the buggy on sloped surfaces or inclines and always apply
the parking brake.
3
Edition: February 2016
2. Intended use
The Crossbuggy is purpose-built to transport a maximum of two chil-
dren with a maximum total weight of 40 kg (incl. luggage) in the outdoors.
During transport the children must be fastened into the buggy by means
of the safety harnesses. Only children who can already sit alone without
support and who are at least 12 months old should be transported. The
Crossbuggy should only be pulled by an adult.
Warning! Check the following before you set off!
• Are both wheels locked into the axle tube and are both brake
discs positioned between the brake pads?
• Is the hand brake/parking brake functioning correctly?
• Are the pull-bar and the backrest locked in place properly?
Risk of injury!
When using the buggy, please adhere to the following instructions:
• When on sloping terrain, always brake the buggy with the hand brake.
• Always take your children out of the Crossbuggy on extremely steep or
sloping terrain.
• When carrying the buggy lift it by the armrests and/or the seat frame
only. Do not lift it by the seat covers, the pull-bar or the nger-guard
elements.
Warning! Do not use the Crossbuggy as a bicycle trailer, do not
hook it onto any vehicle and do not use it for jogging or inline/roller
skating. Risk of injury!
Danger! Do not use the buggy on extremely steep or sloping
terrain. Risk of injury!
4
3. Assembly
In order for you to be able to take your Crossbuggy wherever you go, we
have reduced the amount of space it requires as far as possible. Simply re-
move the wheels, collapse the backrest and fold in the pull-bar – and your
Crossbuggy is ready to transport. Please follow the instructions carefully.
3.1 Attaching and removing the wheels
Your YippieYo Crossbuggy is equipped with two high-quality disc wheels
with quick-release axles (QR axles), enabling them to be attached or
removed quickly and simply. The tyres require no maintenance and the
axles do not need to be oiled or greased. In order to keep the wheels
maintenance-free the QR axles and the bearings need to be regularly
cleaned. If the wheels show sign of wear or become damaged, it is
essential that they are replaced with original parts.
Assembly:
1. Place the chassis carefully on a
at surface with the axle pointing
down. Ensure that the brake is
not engaged, otherwise the disc
will not t between the pads.
2. Using your thumb press the
black button on the QR axle and
push it through the wheel so that
a small part of the axle with the
two balls protrudes on the inner
side of the wheel (Fig. 1).
Fig. 1
5
Edition: February 2016
Fig. 2
3. Lift the buggy up slightly with
one hand and, using the other
hand, position the wheel so that
the disc brake is located be-
tween the two black brake pads
and the QR axle can be pushed
into the axle tube. (Fig. 2)
Fig. 3
4. Press and hold the black button
and push the QR axle into the
axle tube until it locks rmly into
position. (Fig. 3)
5. Repeat the procedure with the
second wheel.
6. Engage the parking brake to
ensure that the buggy does not
roll away.
Warning! Before use check that both wheels are locked in place
in the axle tube and that the brake discs are located between the
brake pads. Risk of injury!
Please note that each wheel is
designed specically to be tted
in either the right or the left hand
side. To ensure this is correct the
tyre tread zigzag design should be
pointing forwards.
6
Removing the wheels:
1. Firstly, release the brake then push the black button on the QR axle.
Pull the QR axle out of the axle tube as far as the wheel so that only
a small part of the axle with the two balls is visible on the inner side of
the wheel. (Fig. 1)
2. Slide the brake disc out from between the two brake pads, then re-
move the entire wheel. (Fig. 2)
3.2 Collapsing and pulling out the backrest
The backrest can be quickly and easily collapsed for transport purposes.
Pulling out the backrest::
1. Lift the backrest up until the two
black safety clips engage with
the crossbar on the back.
(Fig. 4)
2. Lock the clips, one at a time, by
pressing them down with both
thumbs until they click into place
and are rmly clamped around
the crossbar. (Fig. 5)
Collapsing the backrest:
1. To release the backrest press the
two safety clips up using both
thumbs until the backrest disen-
gages from the crossbar.
2. Fold the backrest forward onto
the seat cushion for transport.
(Fig. 6)
Fig. 4
Fig. 5
Fig. 6
Warning! Before using the buggy ensure that the backrest is
securely locked into place. Risk of injury!
Indice
