YOKOGAWA M1233SR Istruzioni operative

Sales News: TNA0928 Date: 07/29/2009

Portable Calibration Kit (M1233SR)

Why Calibrate?

The relationship between oxygen concentration and the electromotive force of a cell is

theoretical. Generally, a sensor shows a slight deviation from the theoretical value

versus the actual value. In this situation, it is necessary to conduct a calibration in order

to ensure that an accurate calibration curve is obtained, and the deviation from the

theoretical cell electromotive force is corrected.

A gas with a know oxygen concentration is used for calibration. In this instance

Yokogawa recommends using a Zero gas of 0.95 to 1.0% oxygen (O2) with a balance

of nitrogen (N2). The recommended Span, or Reference Gas, should be 20.95 to 21%

oxygen with a balance of nitrogen. This can be accomplished using clean dry instrument

air. The M1233SR Portable Calibration Kit provides one 105L bottle of each of these

gases in a convenient carrying case.

How to use the M1233SR Portable Calibration Kit

CAUTION – The contents of the bottled gases are under pressure. Please use caution when

handling the calibration bottles, and installing the pressure regulators.

1. Remove the Cal (1% O2) gas bottle from the case.

2. Install the pressure regulator, with the bottle opening facing

away from you or other personnel. Verify that the o-ring on

the regulator is not nicked, cracked or cut prior to installation.

3. Attach the 3/16in clear tubing onto the regulator nipple.

4. Insert the brass ¼ in NPT fitting to the ZR22G “CAL IN” port

on the bottom of the ZR22G gas manifold.

5. Attach the 3/16 clear tubing to the brass ¼ in NPT fitting.

Sales News: TNA0928 Date: 07/29/2009

Calibrating with the ZR402G Singe Channel Oxygen Analyzer

1. Select the Setup key from the basic panel display to display Execution/Setup.

2. Select Maintenance from the Execution/Setup display.

3. Select Calibration setup from the Maintenance display.

4. Select Mode from the Calibration setup display (see figure 1).

Figure 1

5. Select Manual and press the Enter key.

6. Follow the on screen instructions on the ZR402G.

7. When instructed to open the calibration gas valve, open

the regulator by pushing in and turning the knob ¼ turn.

(The on-off action of the regulator knob is bi-directional).

The calibration gas is now flowing into the probe CAL IN

port.

8. Repeat the above outlined instructions for a span calibration utilizing the 21%

span gas instead of the 1% zero gas.

Indice

Altri manuali YOKOGAWA Apparecchiature di prova

YOKOGAWA

YOKOGAWA CA11E Manuale utente

YOKOGAWA

YOKOGAWA DL9000 Series Manuale utente

YOKOGAWA

YOKOGAWA DLM2000 Series Manuale utente

YOKOGAWA

YOKOGAWA DLM2000 Series Manuale utente

YOKOGAWA

YOKOGAWA 30032A Manuale utente

YOKOGAWA

YOKOGAWA CA11E HANDY CAL Manuale utente

YOKOGAWA

YOKOGAWA DLM2000 Series Manuale utente

YOKOGAWA

YOKOGAWA ScopeCorder DL750P Manuale utente

YOKOGAWA

YOKOGAWA DLM3022 Manuale utente

YOKOGAWA

YOKOGAWA DL 1540 Manuale utente

YOKOGAWA

YOKOGAWA EY200 Manuale utente

YOKOGAWA

YOKOGAWA MY10 Manuale utente

YOKOGAWA

YOKOGAWA AQ1100A Manuale utente

YOKOGAWA

YOKOGAWA 240413 Manuale utente

YOKOGAWA

YOKOGAWA CA12E Manuale utente

YOKOGAWA

YOKOGAWA FC800D Manuale utente

YOKOGAWA

YOKOGAWA AQ1300 Series Manuale utente

YOKOGAWA

YOKOGAWA AQ1200A Manuale utente

YOKOGAWA

YOKOGAWA MY40 Manuale utente

YOKOGAWA

YOKOGAWA DLM4000 Series Manuale utente

YOKOGAWA

YOKOGAWA 30031A Manuale utente

YOKOGAWA

YOKOGAWA ScopeCorder DL950 Manuale utente

YOKOGAWA

YOKOGAWA DL7440 Manuale utente

YOKOGAWA

YOKOGAWA DLM5034 Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente