Zagg Pro keys Guida all'installazione

Online Manual

pro keys (2020)

1

Warranty Registration

Your ZAGG Pro Keys wireless keyboard and detachable case

comes with a one-year manufacturer’s warranty. In order to

activate the warranty, you must register your Pro Keys as well

as keep your purchase receipt. If you purchased your Pro

Keys from ZAGG.com, ZAGG has already registered it and

has a copy of your proof of purchase.

Need more help? Please see our FAQ section at: www.zagg.

com/faq

See the important Health and Safety information on page 12 before

using this product.

2

INSERTING YOUR DEVICE

1

2

fn ctrl

1. Holding your device in landscape mode with the volume

control buttons facing up, press the top half of your device

into the case and apply light pressure to snap it snuggly into

place.

2. Press the bottom half of your device into the case and check

each corner to make sure your device is seated properly.

3

1

2

fn ctrl

3. Once your device has been inserted into the case, attach the

case to the keyboard by setting the case in one of the two

cradles on the keyboard (above the keys).

4. Place the top of the magnetized, foldable back ﬂap against

the top of the back of the case. You’ll feel it magnetically snap

into place. This should create a triangular stand at the base of

the ﬂap that props up your tablet in the case.

5. To detach the case from the keyboard, simply pull the

magnetized back ﬂap away from the case.

6. To remove your device from the case, hold on to the top lip of

the case and press against the back of the case. Then, grasp

the exposed side of your device and lift/pull it away from the

cover.

4

1. To detach the case from the keyboard, simply pull the

magnetized back ﬂap away from the case.

2. To remove your device from the case, hold on to the top lip

of the case and press against the back of the case. Then,

grasp the exposed side of your device and lift/pull it away

from the cover.

REMOVING YOUR DEVICE

1

2

fn ctrl

5

1. To turn your Pro Keys on, press the Power button located

at the top right corner of the keyboard. A green LED will

light brieﬂy.

2. To turn your Pro Keys o, press and hold the Power button

for three seconds. A red LED will ﬂash indicating it has

turned o.

POWERING ON AND OFF

1

2

fn ctrl

6

PAIRING YOUR PRO KEYS

Your Pro Keys keyboard can pair with up to two devices at once.

Pairing your Pro Keys is easy. Just follow these instructions.

1

2

fn ctrl

1. Ensure your device’s Bluetooth® is on.

2. Press and hold Pro Key’s Bluetooth 1 or 2 keys for three

seconds. A blue LED on the Power button will begin pulsing,

indicating your Pro Keys is in pairing mode.

3. Your device will display “ZAGG Pro Keys” as an available

pairing option. Select it and complete any other pairing steps

based on your device.

4. To pair your Pro Keys to another device, repeat steps 2 and 3.

To toggle between devices, simple press 1 or 2.

5. Once paired, the Blue LED on the power button will stop

pulsing and fade to o. Once begun, if the Pro Keys doesn’t

complete pairing after 60 seconds, it will abort the process. If

this happens, repeat steps 2 and 3.

7

1. To activate your device’s keyboard once disconnected, press

the Keyboard Hide/Show button.

2. Turn o the Bluetooth® connection from your device.

3. Turn your Pro Keys keyboard o.

Removing the the tablet in the case from the grooves above the keyboard will

disconnect Bluetooth, and the virtual keyboard will appear on the iPad.

DISCONNECTING YOUR KEYBOARD

Your Pro Keys features a case that protects your device even when

it’s not connected to your keyboard. When you’d like to use the

case without the keyboard, there are three ways you can switch to

your onscreen keyboard.

1

2

fn ctrl

8

1. Plug the Type-C connector into the charging port on the

keyboard.

2. Plug the regular USB connector into any 5V USB outlet. A red

LED will light to indicate your keyboard is charging. This LED

will turn o when your keyboard is fully charged.

Normal use is approximately one hour of use per day without the backlit feature.

Using the backlit feature will impact battery life and require more frequent

charging.

CHARGING YOUR KEYBOARD

Your Pro Keys features a case that protects your device even when

it’s not connected to your keyboard. When you’d like to use the

case without the keyboard, there are three ways you can switch to

your onscreen keyboard.

1

2

fn ctrl

9

BATTERY LIFE

To check your Pro Keys’ battery life, press fn + the battery key. The

LED light will ﬂash one of the following three ways:

• 3 green ﬂashes = 50% or more battery life

• 3 yellow ﬂashes = 25-49% battery life

• 3 red ﬂashes = less than 25% battery life

1

2

fn ctrl

Indice

Altri manuali Zagg Tastiera

Manuali Tastiera popolari di altre marche

Vortexgear

Vortexgear POK3R Manuale utente

Razer

Razer RZ03-0188 Manuale utente

Logitech

Logitech RUGGED LITE Manuale utente

Honeywell

Honeywell ADEMCO 5839 Istruzioni per il montaggio

Hama

Hama AK-120 Manuale utente

Rodgers

Rodgers RK-76 Manuale utente

Logic Controls

Logic Controls KB5000 Series Manuale utente

Rapoo

Rapoo E9270P Manuale utente

iKey

iKey DP-88 Manuale utente

Logitech

Logitech G413 TKL SE Istruzioni di montaggio

Keychron

Keychron C1 Manuale utente

Dahua

Dahua NKB Manuale utente

Ultimate Technology

Ultimate Technology 500 POS Manuale utente

Ducky

Ducky Shine 5 Manuale utente

Mace

Mace MACALLY MERGOKEY Manuale utente

iKey

iKey KYB-42-KIOSK Manuale utente

Akko

Akko MX108 Manuale utente

Viper

Viper V770 Manuale utente