Zavio P5110 Manuale utente

TAZavio P5110 / P5115 Quick Installation Guide

Installation Steps

Please follow the installation steps below to set up your P5110 / P5115 Day/Night Pan/Tilt IP Camera.

Check the package contents against the list below. See P.1

Physical Overview. See P.2

Install the hardware and connect all cables. See P.3

Microsoft OS: Use the software CD to install Intelligent IP Installer. See P.4

Access the IP Camera using Intelligent IP Installer. See P.4

Mac OS Using Safari Browser. See P.6

Change lighting environment setting. See P.7

Change the Web Interface into your preferred language. See P.7

Use IP Camera via Mobile Phone. See P.7

Wireless Setting.( P5115 Model ). See P.8

Windows Live Messenger Setting. See P.8

Access to Internet via Static IP, Dynamic IP or both. See P.10

Application of IP Camera See P.12

For more information, please check the User Manual available in the Software CD or you can download the latest

software from http://www.zavio.com

Package Contents

Camera P5110 / P5115 Day/Night Pan/Tilt IP Camera

Quick Installation Guide Brief product information and quick installation

Software CD

IP Surveillance Software

Intelligent IP Installer

User Manuals

Language Packs

Component Pack Bracket, two packs of screws , Antenna (P5115 model)

Adaptor 12V DC, max 12W

Software CD

Quick Installation Guide

Camera Component Pack

Physical overview

Focus Adjustment Ring - Adjust focus manually to achieve the best image quality

Infrared LEDs -Infrared LEDs for night use up to 15 working distance

Wireless Antenna (for P5115) - For connection of IEEE 802.11 b / g wireless network.

Built-In Microphone - Built-In Microphone for Two-way Audio

Network LED indicator - Network LED will light up after connecting with network.

Power LED indicator - Power LED will light up after completing the boot process.

Power Connector - For connection of 12V DC input.

Reset - When the device is empowered, press the Reset Button to reboot the device, or hold the Reset Button for 10

seconds to set the device settings back to factory default

Audio In -To support audio in with Microphone for two way audio

Audio Out - To support audio out with earphones or speakers for two way audio

Network Connector - For connection to the Ethernet via RJ-45 standard with PoE

I / O Terminal Connector - 1Input / 1Output to support External Alarm and Sensor used for motion detection, event

triggering and alarm notification…etc.

DI / DO Terminal connector diagram - Please refer the following illustration below for connection method:

Install the hardware and connect all cables

a. Wall mounting and Ceiling mounting

a 1. Wall mounting

Fix the camera and bracket to the wall using

two screw and plastic anchors.

Fix the camera to the bracket with two

supplied screws.

a 2. Ceiling mounting

Fix the camera and bracket to the ceil using

two screw and plastic anchors.

Fix the camera to the bracket with two

supplied screws.

b. Connect all cables b 1

b1. Without Power over Ethernet (PoE) connection

(P5110 / P5115)

- Connect the power adaptor to the IP Camera.

- Using a standard RJ-45 network cable, connect the IP Camera

to a normal Hub / Switch / Router.

b 3

b 2

b2. Power over Ethernet (PoE) (P5110 Model )

- Using a standard RJ-45 network cable, connect the IP Camera

to a PoE-enabled Hub / Switch / Router.

b3. Wireless connection (P5115 Model )

- Connect the power adaptor to IP Camera.

- Connect to Wi-Fi.

Microsoft OS: Use the software CD to install Intelligent IP Installer

Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow those steps to

install the firmware.

Access the IPCamera using Intelligent IPInstaller

1. Before using Intelligent IP Installer, please check two setting.

a. Browser’s Internet Properties →Security →

Default Level

b. Browser’s Internet Properties →Privacy

→Uncheck Pop-up Blocker

2. Click the Intelligent IP Installer Icon

on your desktop. The main page will

show up listing all active camera and

video server devices. Select the relevant

IP camera from the list and click Link

to IE.

Select “Intelligent IPInstaller” and follow

3. Enter your Username and Password to login to the

IP Camera. (Default is admin / admin)

4. When accessing the IP Camera for the first time, a yellow information bar appears below the address bar: This

website wants to install the following add-on: ‘AxvideoView.cab from ‘Zavio Inc’.

5. Click the information bar, and select Install ActiveX control.

6. Click Install.

7. Live view displays in the centre of your web browser.

Mac OS using Safari Browser

1. Select Safari icon

2. Click Bonjour function and select the camera

you wish to access.

o the IP

camera. (Default is admin / admin)

3. Enter name and password to login t

4. The monitor image will be displayed in your

browser.

Lighting environment setting

The default setting of lighting environment is Auto. However, you may also select 50 or 60 Hz upon the lighting

o to “Setting →Basic →Camera →Advance＂, choose the environment setting you wish.

environment of your country.

Change the Web Interface into your preferred language

Use the settings screen to set the language of the Web In

terface.

nguage”.

in the Software CD and then click OK.

3. The web interface will change into your preferred language.

Go to “Setting →Basic →System →La

1. Insert Software CD into your CD-ROM.

2. Browse and select the preferred language from language pack

Use IP Camera via Mobile Phone

1. Using IP Camera via iPhone

Select Safari function →Enter IP address in the web link →enter username and password (default value

dmin/admin) →The Zavio user interface and Live Image will show up in the middle of the screen.a

2. Mobile phone viewing

a. 3G Mobile Phone Streaming Viewing

For 3G mobile phone viewing, please type “ rtsp://<IP>:<PORT>/video.3gp ” into your 3G web media player.

Default value is 554.)

one Viewing

<IP> is the IP address of your IP camera;

<PORT> is the RTSP port of your IP camera (

Example: rtsp://100.10.10.1:554/video.3gp

b. 2.5G Mobile Ph

phone viewing, type “ http://<IP>/mobile.wml ” into your 2.5G web browser.

b1. WAP viewing

For 2.5G WAP mobile

b2. Browser viewing

For 2.5G mobile phone browser viewing, type “http:// <IP>/mobile.htm ” into your 2.5G web browser.

Wireless Setting (P5115 Model)

Power the IP Camera and connect an Ethernet network cable to the IP Camera’s LAN port. Using Intelligent IP

eless”, set the wireless option to “On”

ection.

ddress field.

Installer and entering the camera’s setting page.

Please go to “Setting →Basic →System →Network →Wir

1. Click Refresh and choose the Access Point you wish to connect.

2. Enter the password within the Active transmit key field if required.

3. Choose DHCP to connect through a dynamic IP or assign a static IP for the wireless conn

4. Click “OK” to apply settings. The Wireless IPaddress appears in the IP a

Note: The wireless private IP address can be found in Intelligent IP Installer.

Wireless IP address

Windows Live Messenger Setting

Live video of the IP Camera can be displayed using Microsoft Live Messenger, while providing its public IP a

to users for access via t

ddress

he web browser. This feature is useful especially when the IP address of the camera is

→System →

dynamically assigned.

If you wish to set up MSN Messenger, enter the camera’s setting page. Go to “Setting →Basic

Network →Messenger”, set the Messenger option “On.” Then, follow the below steps:

2. Enter the new MSN Messen

er Lo

in Account an

Password within the desi

nated boxes.

1. Create a new MSN Messenger account (e.g.: [email protected]) for the IP Camera.

3. Under the IP Notification Option, Click “On” to enable IP notification to the users.

9. The IP Camera automatic

10. Click Action b

ally accepts your invitation and

s live video is displayed.

and PT Control

nction via MSN add-in control panel.

utton and choose Start control panel to

e control panel.

11. You can use Snapshot, Image Setup

7. The IP Camera will send you a message with its Public

IP and Private IP if the IP Notification Option is enabled.

6. Add the new MSN Messenger account for IP Camera (e.g.: Camera at [email protected]) to your contact

8. Click on the small camera icon. Then, choose “View a

w contact's webcam”.ne

4. Under the Privacy Option, Click “On” to create an allow list.

5. Use your existing account to login to MSN Messenger.

Access to the Internet

a. Internet connectivity of the IP camera can be established by inputting the cameras IP

information within the

Information section. (Please go to Setting →Basic →Network→Information)

Service Provider (ISP) within the PPPoE

secti

b. Internet Connectivity of the IP Camera can be established through PPPoE (Point-to-Point Protocol over the

Ethernet) by inputting the username and password from your Internet

on. (Please go to Setting →Basic →Network→PPPoE)

Note 1: Please reboot the IPCamera, after changing the PPPoE settings.

Note 2: Please turn on the DDNS and IP Notification function when using the PPPoE function.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente