Zebex Z-3052 Manuale utente

Introduction

This Quick Start Guide applies to

image

readers. The varied models

include handheld, hands-

free and

module.

All models are capable of

decoding 1D and 2D barcode

symbologies.

he scanner must be properly

powered before programming. Duri

the programming mode, the scanner

will acknowledge a good and valid

reading with a short beep.

Otherwise,

the

scanner will remain silent for

invalid scanning.

The barcodes herein

only prepares

you ready to use the scanner. For

detailed programming ins

tructions and

safety notices please refer to the

complete Programming Guide

in the

manual CD.

If you can’t find the manual CD

please contact your distributor.

Laser Safety

The devices using lasers comply with

US 21CFR1040.10 and 1040.11

except for d

eviations pursuant to

Laser Notice No. 50 dated July 26,

2002 and IEC608525-1:+A1:1997+

A2:2001.

The laser classification is marked on

one of the labels on the devices.

Avoid long term staring into direct

laser light

to prevent damage to user

eyes.

◎

◎◎

◎Default Factory Device Setting

Parameter Default

-Level (for handheld/hands-free scanner)

Trigger Mode -Presentation (for scan module)

Serial Host Type SSI Host

USB Device Type IBM Handheld USB

USB Country Keyboard Type

North American

* Level Mode

A trigger event activates decode processing,

which continues until the trigger event ends, a

valid decode, or the decode session time-out is

reached.

* Presentation Mode

When the device detects an object in its field of

view it triggers and attempts to decode.

1. Using Serial Interface

1.1Serial Host

The default setting is SSI Host. If you use Serial Host, scan the

Enable Serial Host

(No Variant) barcode at right before use.

If you use Serial Host, your RS232 software, such as Windows HyperTerminal,

can receive data from the scanner.

Enable Serial Host (No Variant)

1.2 Character Return

Scan the <DATA> <SUFFIX 1> barcode at right to set up character return.

1.3 SSI Host

The default setting is SSI Host. If you use SSI host, your host device can transmit data

to software like Windows Notepad or Word. Follow the steps below to start using.

1. Connect the scanner serial cable to th

e host computer and connect a +5V power

adapter to the DC jack on the cable. The scanner would give a "Do Re Mi"

melody

when powered on.

2. Read the SSI Host barcode at right to set up interface.

(Skip this step if you are

using the default setting.)

3. Execute KeySimulator.exe in the Manual CD after the computer detects

the

scanner.

Tick COM port and Send Return (Figure 1).

SSI Host

Figure 1

2. Using USB Interface

2.1 HID Keyboard Emulation

The default setting is IBM handheld USB. If you use HID keyboard emulation, scan

the

HID Keyboard Emulation barcode at right before use.

Scanner driver for HID keyboard is built-in for

Microsoft Windows version after

2000. But i

f you use Windows 98, you may need to download driver from

Microsoft website.

HID Keyboard Emulation

2.2 Character Return

Scan the <DATA> <SUFFIX 1> barcode at right to set up character return.

2.3 IBM Handheld USB

If you use IBM handheld USB, follow the steps below to start using the scanner.

1. Connect the scanner USB cable to the host computer.

2. Read the IBM Handheld USB barcode to set up interface

. (Skip this step if you

are in default setting.)

3. On the computer, check Human Interface De

vice to see if the computer

successfully detects the scanner as “HID-compliant device” (Figure 2).

Figure 2

4. Execute KeySimulator.exe in the Manual CD after the computer detects

the

scanner.

5. Tick USB ver1.0 and Send Return (Figure 3).

IBM Handheld USB

Figure 3

P/N: 593-9AZ00E-004

Altri manuali per Z-3052

Altri manuali Zebex Lettore di codici a barre

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente