ZKTeco LPRS2000 Manuale utente

Page | 1

USER MANUAL

Hybrid Vehicle Recognition Terminal ---LPRS2000

Version: 1.2Date: August, 2018

Safety Precautions

Electrical safety

Install the camera , reader and LED screen first, and then connect the data cable and power cable in

sequence.

Before connecting an external cable to the device, complete grounding properly and set up surge

protection; otherwise, static electricity will damage the mainboard.

Ensure that the signal connected to the device is a weak-current (switch) signal; otherwise,

components of the device will be damaged.

Ensure that the standard voltage applicable in your country or region is used. If you are not certain

about the applicable standard voltage, please consult your local electric power company. Power

mismatch may cause short circuit or device damage.

In the case of power supply damage, return the device to the professional technical personnel or your

dealer for handling.

To avoid interference, keep the device far from generators with strong electromagnetic radiation, such

as radios, televisions, and electric generators.

Operation safety

Before powering on the device, read this document carefully.

The device hardware may be damaged by transportation and other unpredictable causes. Check

whether the device has serious damage before installation. If the device has major defects you cannot

solve, contact your dealer as soon as possible.

Do not connect or disconnect cables to/from the device when it is energized.

Dust, moisture, and abrupt temperature changes can affect the device's service life. You are advised

not to keep the device under such conditions.

Do not keep the device in a place that vibrates. Handle the device with care. Do not place heavy

objects on top of the device.

Do not apply rosin, alcohol, benzene, pesticides, and other volatile substances that can damage the

device enclosure. Clean the enclosure with a piece of soft cloth or a small amount of cleaning agent.

Nonprofessional personnel are not allowed to open the device cover. If you have any technical

questions regarding usage, contact certified or experienced technical personnel.

Note: (1) Complete grounding properly when connecting the power supply. The positive polarity and

negative polarity of the DC 12V power supply must be connected correctly. Reverse connection may

damage the device. Do not connect the AC 24V power supply to the DC 12V input port. Read the user

manual carefully before use, and connect wires in accordance with the positive polarity and negative

polarity shown on the device's nameplate.(2) The warranty service does not cover accidental damage

and damage caused by mis operation.

III

CONTENTS

1 Overview.................................................................................................................................................................................................................1

1.1 About This Product ..........................................................................................................................................................................1

1.2 Features....................................................................................................................................................................................................1

1.3 Appearance...........................................................................................................................................................................................2

1.4 Port definition......................................................................................................................................................................................3

1.4.1 LPR Camera............................................................................................................................................................................3

1.4.2 UHF reader .............................................................................................................................................................................4

1.5 System Requirements ....................................................................................................................................................................4

2 Connection ...........................................................................................................................................................................................................5

2.1 Connection Setup.............................................................................................................................................................................5

2.2 Network Settings...............................................................................................................................................................................5

3 Reader modifying setting via demo.....................................................................................................................................................7

3.1 USB Connection.................................................................................................................................................................................7

3.2 Software Introduction....................................................................................................................................................................7

4 Camera Access over a Web Browser....................................................................................................................................................9

4.1 Login..........................................................................................................................................................................................................9

4.2 Liveview................................................................................................................................................................................................10

4.3 Replay.....................................................................................................................................................................................................11

4.4 Config.....................................................................................................................................................................................................12

4.4.1 Local Config........................................................................................................................................................................12

4.4.2 Audio Parameter .............................................................................................................................................................13

4.4.3 Video Settings...................................................................................................................................................................14

4.4.4 Smart.......................................................................................................................................................................................21

4.4.5 Network Settings............................................................................................................................................................26

4.4.6 Storage Settings ..............................................................................................................................................................30

4.4.7 Alarm Settings ..................................................................................................................................................................31

4.4.8 COM Setting.......................................................................................................................................................................33

4.4.9 System....................................................................................................................................................................................34

4.5 Alarm ......................................................................................................................................................................................................38

5 FAQs ........................................................................................................................................................................................................................39

LPRS2000 Hybrid Recognition Integrated Machine User Manual 1

1Overview

Note: The pictures in this manual may not be exactly consistent with those of your product; the

actual product's display shall prevail.

1.1 About This Product

Adopted multiple recognition modes based on long-range RFID and license plate recognition.

LPRS2000 is a hybrid recognition vehicle management terminal and mainly composed of LPR camera

and UHF reader

The LPR camera is an IP camera based on the H.264/H.265 algorithm, integrating HD imaging, image

collection, license plate recognition, image decompression, and data storage on an embedded

intelligent platform. It automatically identifies the numbers, letters, and characters on license plates,

and outputs the identified results

And the UHF reader adopts Impinj R2000 card reader chip, and the card reader part adopts module

integrated design. It has stable card reading performance, good card reading performance

consistency, long service life, low card reading performance by external influence。

1.2 Features

(1) High-resolution image decompression

The camera supports Main Stream and Sub Stream. The resolution of Main Stream: 1920 x 1080 and

1280 x 720; the resolution of Sub Stream: 704x 576, 640 x 480 and 320x 240.

(2) Comprehensive network monitoring and transfer The camera sets up a network connection using

an RJ-45 10M/100M auto-negotiation network port. It supports TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, DNS,

DDNS, DHCP, FTP, NTP, PPPOE, SMTP, UPNP, and other protocols.

Fixed vehicle capture rate and recognition accuracy are up to 100%

(3) Support vehicle without license plate (or seriously fouled license plate) vehicle

(4) Adapt to complex application environment, such as thick fog weather

2 LPRS2000 Hybrid Recognition Integrated Machine User Manual

1.3 Appearance

LPRS2000 Hybrid Recognition Integrated Machine User Manual 3

1.4 Port definition

1.4.1 LPR Camera

Wiring terminal diagram

Port description

4 LPRS2000 Hybrid Recognition Integrated Machine User Manual

1.4.2 UHF reader

Cable Definition

NO Color Function

1 Red +12V

2 Black GND

3 Purple

Trigger Point

(Active-low)

4 Green Wiegand D0

5 White Wiegand D1

6 USB Connector

NOTE:

(1) In "Trigger Read" work mode, the reader will not read cards before a low level signal to "Trigger

Point" is delivered. "Trigger Point" is mainly used for working with the ground sensor of vehicle

parking system.

(2) In "Always Read" work mode, once the card in the effective range, the reader will output the card

number via Wiegand continually.

1.5 System Requirements

The PC used to display images and control the camera has the following requirements: CPU:

Intel Pentium 4 2.4 GHz or above.

RAM: 1G or above.

Network port: 100M Ethernet port.

Operating system: 32-bit or 64-bit operating system, such as Windows 7 ,Windows 8, Windows 10.

Internet Explorer: Microsoft Internet explorer 6.0 or later.

LPRS2000 Hybrid Recognition Integrated Machine User Manual 5

2Connection

2.1 Connection Setup

The camera is connected to a switch or a PC over the standard Ethernet port.

The reader is connected to the camera by Wiegand.

The camera and reader are connected to a DC 12V 1A power adapter.

If the camera is connected to a central power supply, the power input polarity and the power

interface must be connected correctly.

2.2 Network Settings

Network and IP Address Configuration Set the IP address of the camera to be in the same network

segment as the PC.

Note: IP addresses in the same LAN cannot be the same; otherwise, IP address conflict will cause

device malfunction.

Default Parameter Settings Set the IP address, gateway address, and other information of the

camera properly before use. You can modify the default parameter settings according to requirements.

IP address: 192.168.1.88(Remarks: The device model is displayed on the label attached to the device

enclosure.) Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 2.2.2

Connectivity Test After you set the camera IP address, click Start > Run in the lower left corner of the

Altri manuali per LPRS2000

Indice

Altri manuali ZKTeco Terminale touch

ZKTeco

ZKTeco iFace Series Manuale utente

ZKTeco

ZKTeco ZKAIO1000W Manuale utente

ZKTeco

ZKTeco SpeedFace - V5L Manuale utente

ZKTeco

ZKTeco PA22 Manuale utente

ZKTeco

ZKTeco US922 Series Manuale utente

ZKTeco

ZKTeco MB10-VL Manuale utente

ZKTeco

ZKTeco ZKAIO4000W Manuale utente

ZKTeco

ZKTeco S922 Series Manuale utente

ZKTeco

ZKTeco Green Label ProBio Manuale utente

ZKTeco

ZKTeco ZKBio710 Series Manuale utente

ZKTeco

ZKTeco IM20 Manuale utente

ZKTeco

ZKTeco LockerPad-7B Manuale utente

ZKTeco

ZKTeco F305 Manuale utente

ZKTeco

ZKTeco SpeedFace M4 Manuale utente

ZKTeco

ZKTeco D3 Series Manuale utente

ZKTeco

ZKTeco ZPAD+ Manuale utente

ZKTeco

ZKTeco uFace Plus Series Manuale utente

ZKTeco

ZKTeco G4 Pro Series Manuale utente

ZKTeco

ZKTeco EFace10 Manuale utente

ZKTeco

ZKTeco LFace10 Manuale utente

ZKTeco

ZKTeco G2 Manuale utente

ZKTeco

ZKTeco D1s Manuale utente

ZKTeco

ZKTeco FaceKiosk-H10A Manuale utente

ZKTeco

ZKTeco ProFace X Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente