Zonestar Z5 Series Manuale utente
Model: Z5 Serial (2nd Edition))
User Manual
ZONESTAR product line and naming rules
2
Z5 S M2
Produce Serial
P802Q: Metal Prusa i3, Stainless Steel Frame
M8: Metal Prusa i3, black metal Frame
Z5: Full Metal Aluminum Frame, 220x220x220mm
Z6: Full Metal Aluminum Frame, 150x150x150mm
Z9: Closed Full Metal Aluminum Frame, 300x300x400mm
Z10: Full Metal Aluminum Frame, 300x300x400mm
Hotend & Extruder
NULL : Singel extruder
R2: Dual extruder and dual nozzle
M2: 2-IN-1-OUT Mixing Color
M3: 3-IN-1-OUT Mixing Color
Hardware Edition
NULL: The First Edition
S: The Second Upgrade Edition
T: The Third Upgrade Edition
3
Specifications and configuration
SKU
Extruder Qty.
Nozzle Qty.
Mix color
Z5S
1
1
○
Z5S-M2
2
1
●
Building mode
FFF/FDM
Build volume
220mm x 220mm x 230mm (LxWxH)
Nozzle diameter
0.4mm default
Layer height
0.1~0.36mm
Extruder number
1 or 2
Print speed
Max. 150mm/s (Recommand is 40~50mm/s)
Printing precision
±0.1mm
Support file format
stl, obj, gcode
Hotbed power
12V 140W +-10%
Hotbed temperature
110 degree max
Printing material
PLA,ABS,PETG,HIPS,PVA, etc. (recommand material is PLA for Z5M2)
Host software
Repetier-host, Cura, etc. (recommand is Repetier-host)
Host software system
Linux,Windows and OSX
Specifications:
Configuration:
Remark:
●: Default equipped with this feature.
○: This function is not available by default and can be upgraded.
!! ATTENTION !!
Please put the printer away from the reach of kids.
Must be guided by adults when children are installed or used.
Take care when installation, to avoid electrical shock hazards.
Please keep well-ventilated condition! May produce toxic gases when
printer working.
Caution: Hot!
Hotend has high temperature even the printer stop working.
Caution: Hot!
Hotbed has high temperature even the printer stop working.
Please strictly follow the standard operation when installation.
Please make sure you have set the AC power select switch to the
correct position before power on.
For mixing color printer, must load filament to both of the extruders,
even if you print single color 3D object.
4
1
Base
9
Aluminum profile (5 PCS)
2
Control box
10
Lead Screw
3
Control Panel
B1
Tools
4
Z carrier left
B2
Lead screw Fix module/Z Endstop/Screws/Base
Junction/Rubber pads
5
Z carrier right
B3
Timing Belt/PTFE tube(1 or 2)/Cable tie/End cover
6
Z-axis driver
11
Hotend(for Z5S/Z5S-R2/Z5S-M2 Extruder )
7
USB cable
12
SD Card
8
Power cord
13
2nd Extrudsion feeder(Only For Z5S-M2 or Z5S-R2)
2 3 4 5 7
Parts
1 8
10
9
6
12 13
11
B1 B2 B3
Loosen these screws and move the ider
to the front to tighten the belt
6
Y Axis Belt adjust
1
7
Assemble Aluminum profile
Z5-ZL
Z5-ZR
Z5-B
M5x20 *3
9
B2 Pay attention to the direction of these
holes, big is on the front.
8
Assemble Best and rubber pads
Base
HM5x20 *4M5 spring
washer*4
Base Junction Rubber pad *4
M4 Square
nut
Rubber
pad
Shim
PM4x8
B2
9
Assemble Z carrier
Z carrier
left
Z carrier
Right
Z5-T
M5x20 *3
4 5 9
B2
10
Debug
MUST rotate the eccentric cloumn and let the Z carrier left and hotbed bracket can
hold the profile and move smoothly.
It is recommended to loosen these screws first, and then let the Z carrier right hold
the profile well and move smoothly, and then tighten them again.
Questo manuale è adatto per i seguenti modelli
2
Altri manuali Zonestar Stampante 3D
Zonestar
Zonestar Z8PM4 Pro Manuale utente
Zonestar
Zonestar Z6 Manuale utente
Zonestar
Zonestar Z8X Manuale utente
Zonestar
Zonestar P802-STS Manuale utente
Zonestar
Zonestar P802QS Manuale utente
Zonestar
Zonestar Z9 Series Manuale utente
Zonestar
Zonestar P802QS Manuale utente
Zonestar
Zonestar P802CR2 Manuale utente
Zonestar
Zonestar P802QS Manuale utente
