Abask Q40S Manuale utente
Abask Dash Camera
USER MANUAL
Contents
English…….......……………….…….1-9
Deutsch…………….......……………10-20
Français………………….......………21-31
Español……………….......…………. 32-42
Italiano………………...….......……... 43-53
Thank you for purchasing our car safety series HD digital onboard
rear view driving video recorder. Based on maintaining the original
appearance of the original vehicle, this product specializes in
researching and developing a delicate, thin, stylish alloy shell,
multifunctional vehicle rear mirror recorder, making your life
worry-free and colorful.
This user’s manual explains the details of how to use and operate
the product, and some matters need attention, technical specifications,
etc. Please read this manual carefully before using and fully
understanding. Please keep this manual properly. We hope this
product can meet your requirements and serve you for a long time!
This product is a high-definition camera with dual cameras,
reversing display, one- button recording, network camera, gravity
sensor and other functions. Mainly use it in car shooting as well as
other outdoor activities.
1.A main unit 2.A car charger 3.A rear camera
4.A suction cup 5.A user manual
1. In well-designed alloy shell body, it is easy to take videos and
pictures.
2. High-sensitivity motion detection function.
3. With 4 inches high-resolution IPS display screen, you can
watch the footage immediately in the event of an accident scene
to find out the responsibility of the accident and reduce disputes.
4. Recorded footage is compatible with most video players,
easy to upload to video websites.
5. With 2 MP Wide-angle HD 6-layer- glass lens, its visual angle
can reach 170 degrees, sight range can reach to the both sides
of the car’s front end, record completely without dead corner.
6. TF card is compatible with Class-10 or higher storage devices,
32 GB maximum support.
Preface
4-inch-IPS-screen Driving Video
Recorder with Suction Cup
Ⅰ. Product Introduction
1
Ⅱ. Product Characteristics
Accessories included:
Remark: the actual parts are subject to what the actualproduct has.
2
7. It’s easy to install and maintain the original appearance of the car.
8. Gravity Sensing: This product has built-in G-sensor. When the
vehicle collides, the recorder can automatically save and lock the
current recorded important video (the locked video will not be
covered by the “loop recording” function).
LCD Screen Size 4-inch IPS Full View HD Screen
Camera 2 Megapixels
Video Format MOV
Video Resolution 1296P 1080FHD 720P
Photo Format JPG
Storage Card TF Card
Storage Capacity 32GB Maximum Support
Rear Camera Support
USB Port USB2.0 5pin
Power Interface USB2.0 DC5V 1.5A
Frequency 50HZ/60HZ
Battery 300mAh 3.7V polymer lithium battery
Operating Current 590mA
Storage Temperature -30℃~70℃
Operating Temperature 0℃~50℃
Microphone /
Speaker Support
Language Chinese, English, Deutsch,
Français, Español, Italiano
Photo Resolution VGA 1.3M 2M 3M 5M 8M 10M 12M
Ⅲ. Specification Parameter
Ⅳ. Product Structure
3
1) Screen
2) Mode Button[M]
3) LED Indicator Light
4) Page Up Button[ ]
5) Confirmation/Power
Button[OK/ ]
6) Page Down Button [ ]
7) Menu Button[]
Common Buttons Notes:
Mode Button[M] 1) Return function: Return to the previous page.
2) Switch function: switch around video-camera-file playback and
system menu settings. 3) Lock function: press it in recording mode
to lock/unlock the current file.
Page Up Button [ ] In menu setting and file selection, press it to
select; press it in video standby mode to switch to front/rear camera;
in playback mode, switch to the previous file.
Confirmation Button [OK/ ] Press and hold this button to turn
on/off the dash cam; Press it the start/stop recording when power
on; it is as confirmation function during menu setting; press it to
play files in file playback mode; press it to take pictures in camera mode.
Page Down Button[ ] During menu setting and files selection,
press it to select; in video recording mode, press it can turn on/off
audio recording; in file playback mode, press it to switch to the next file.
Menu Button [ ] Press it in video standby mode, enter video and
system menu settings; press it in camera mode to enter camera
menu settings; press it in file playback mode to enter files deleting
and the system menu settings.
8) Rear Camera Port
9) Mini USB (Power Supply Port)
10) Fill Light
11) Holder Port
12) TF Card Slot
13) Reset Hole[RESET]
14) Speaker
15) Front Camera
4
In recording standby mode/photo/ file playback mode,
press menu button [ ]and then press mode button[M]
to set the following contents:
Display Protection Off/ 30 Seconds/ 1Minute/ 2 Minutes
Auto Power Off Off/ 1 Minute/ 3 Minutes/ 5 Minutes
Frequency 50Hz/ 60Hz
Beep Sound Off/ On
Date/ Time YY/ MM/ DD/ HH/ MM/ SS
Fill Light Off/ On/ Auto
Format Cancel/ OK
Default Setting Cancel/ OK
Version ********
Language Chinese, English, Deutsch,
Français, Español, Italiano
In recording standby mode, press menu button[ ]to
set the following contents:
Resolution 1296P 1080FHD 720P
Dual Camera Off/On
Loop Recording Off/ 1 minute/ 3 minutes/ 5 minutes
Interval Record Off/ 100ms/ 200ms/ 500ms
Exposure +3 +2 +1 +0 -1 -2 -3
Motion Detection Off/ On
Recording Audio Off/ On
Date Stamp Off/ On
G-sensor Off/ Low/ Medium/ High
Parking Guard Off/ On
WDR Off/On
5
Capture Mode Single shot/2s Delay/5s Delay/10s Delay
Resolution VGA 1.3M 2M 3M 5M 8M 10M 12M
Burst Shooting Off/ On
Quality Premium/ Normal/ Standard
White Balance Auto/Daylight/Dark/Tungsten/
Fluorescent
Color None/ Black and White/ Classic
ISO Auto/ 100/ 200/ 400
Exposure +3 +2 +1 +0 -1 -2 -3
Anti-shaking Off/ On
Date Stamp Off/ On
Sharpness Strong/ Normal/ Soft
In camera standby mode, press menu button [ ]to set
the following contents:
Delete
Power on/off
Video Recording
Delete Current File? / Delete all?
1. Manual: Press and hold[OK/ ] button for 5
seconds to start/shut down. 2. Automatic: the
unit will be automatically on when there is an
external power input; it will shut down and
automatically save the files after a few seconds
if power off.
Insert a memory card and connect the car
power cord, it will automatically record after
power on, and the video indicator (red dot on
the screen) will flash. Press[OK/ ]button to
stop recording.
Protection Lock Current File/ Unlock Current File/
Lock all/ Unlock All
PowerPoint 2 seconds/ 5 seconds/ 8 seconds
In file playback mode, press menu button [ ]to set the
following contents:
Ⅴ. Product Functions and Operation Instructions
6
Picture Taking
File Playback
In the video standby mode, press mode button
[M]to enter photo mode, press[OK/ ] button
to take pictures and save.
USB Connection
There are three options when USB data cable
plugs in the computer:1.Storage: Press [OK/ ]
button to enter the USB disk reading , you can
play, copy, and delete the files or do other
operations on the computer.2.PC Camera：
It can be an Internet camera.Recording mode:
Supply power to the dash camera and make
it record normally.
Loop Recording
This product can do loop recording. Looping
mode can be set in the video menu. For example,
if looping time is set for 3 minutes, the recorder
will automatically save a section of videos every
3 minutes. When the memory card gets full,
the newly recorded files will overwrite the old
files that are not locked.
When the vehicle is impacted by the external
forces, G-sensor will work. The dash cam will
automatically lock and save the current shooting
video file and protect it from being covered by
the loop recording. The top left corner of the
screen will display an icon of a lock. The level
of its sensitivity can be chosen on the menu setting.
G-sensor
In the normal status of the recording, press
mode button[M]to lock and save the current
file without having it covered, an icon of a lock
will display on the top left corner of the screen.
Lock Function
In the status of the parking monitor, if the
dash cam detects impact forces, it will
automatically start recording and lock the
file in case of being covered.
Parking Guard
Press mode button[M]twice in video standby
mode to play back files. Press page up and
down buttons to select the files, press
[OK/ ] button to play the file, press page
up and down buttons to fast forward/backward.
7
1.Shut off the car engine, and turn off the recorder.
2.Insert a high speed TF Card (above Class 10) into the card slot
of the dash camera.
Note:Please format the TF card in the dash cam when use it first time.
3.Please fix the dash camera on the proper position of the car’s
rear view mirror.
In the standby mode, if the ‘motion detection'
function is on, the camera will automatically
capture the moving objects and start recording.
It will automatically stop recording while no
object is moving. This function is closed by
the system default.
Motion Detection
You can set it on whether you need to record
sound in the process of recording. Default
is opening.
Audio Recording
Having the rear camera installed and cabled,
the car will automatically switch to reversing
view when you reverse your car; full screen
displays the rear view.
Reversing View
Battery Charging The battery charges automatically when the
external power supplies.
Display Protection
It can automatically turn off the screen
display by timing so as to have the product
worked in very low power consumption;
four options for ‘Display Protection’ :
‘off/30 seconds/1 minute/2 minutes’.
‘1 minute’ means the screen light will be
off and enter power saving mode after
1 minute.
Menu Setting
In standby mode, the video resolution, loop
recording, exposure, motion detection and
recording etc. can be set by pressing the
menu button. Pressing the menu button
again can edit the system of date time,
auto power off, beep sound, language,
frequency, etc.Note: If the machine crashes
because of improper operation, please use
a tiny hard object to press the reset hole,
and then restart the dash camera, it will return
normal.
Ⅵ. Installation Guide
8
4.Plug the car charger into the car cigarette lighter, the other end
plugs in the USB port of the dash camera.
Note:You can lay the extended charging cable along the edge of
the car windshield.
5.While installing the rear camera, please plug the rear camera in
the dash cam interface first, and then lay the cable on the ceiling
of the car from front to back. Install the rear camera on the back
of the car. The red cable connects to positive electrode of reverse
lamp while the black cable does not connect or it connects to the
grounding wire. Pay attention to the direction during installation.
6.Adjust the lens position to keep the lens and the ground flat.
7.Start the car engine; check whether the machine is installed
correctly or not.
1. Why can’t it be turned on?
2. Why does the inserted new memory card warn error?
3. Why does the new-bought memory card have these problems:
cannot record, reacts slowly, no video file found and cannot play?
4. Why loop recording does not work?
A:1) It’s because you set the “G-sensor” and “Parking Guard” on.
These two functions will have the files locked, if there are too many
locked files, it will stop loop recording and warn that the memory
card gets full. You can choose to turn off these two functions or
adjust the sensitivity of the G-sensor to low. If you want to delete
those unimportant locked files, please unlock them first and delete
them on the dash camera directly, or connect the dash camera or
memory card to your computer, delete them on your computer.
2) There are many low-speed memory cards and inferior memory
cards sold on the market, if you use those cards above, it will also
result in full card. Given that the dash cam is writing the memory
card constantly during recording, if the card has such a problem,
it will also cause the error.
A: If the memory card has not been formatted in this
machine, or it is a low-speed or fake memory card, it
may have those problems mentioned above. So please
use an original high-speed memory card over Class 10.
A: If the recorder checked there is no system file in the new card,
it will warn an error, please format the memory card by this machine
and then it will work.
A: Please confirm whether the dash camera is charging or has been
connected to the car charger or not; When you start your car engine,
the dash camera will be turned on and record automatically.
Ⅶ. FAQ
Altri manuali per Q40S
1
Indice
Lingue:
Altri manuali Abask Telecamera da cruscotto
