ABB SmartMedia SM2000 Istruzioni per l'installazione

INFORMATION

No. INF02/61 Date: June 2002 Product:SM2000 Videographic Recorder

Manual: IM/SM2000

SM2000

Compact Flash Hardware Installation

noitpircseD.oNtraPytQ

ylbmessA-buShsalFtcapmoC2600/0002RG1

wercS01x5.2M32811B2

kniLBCP0529B2

tcapmoC0002MS–teehSnoitamrofnI noitallatsnIerawdraHhsalF 16/20FNI1

2 Tools Required

• Medium, flat-bladed screwdriver

• No. 1 Pozidriv screwdriver

3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

Caution. The instrument is vulnerable to

electrostatic damage. Wear an anti-static strap or

dismantle the unit on an anti-static workbench.

1) Isolate the instrument from the power supply.

2) Remove the instrument from its case – see Fig. 3.1.

1 Introduction

This Information Sheet describes the procedure for fitting

Compact Flash hardware to SM2000 instruments.

The Compact Flash Media Service Pack, GR2000/0700,

includes the following items:

Withdraw the instrument

from the case

Remove tamper-proof seal

(if fitted)

Unscrew the jacking screw

Fig. 3.1 Removing the Instrument from its Case

Information. Refitting is the

reverse of removal.

Remove pozidriv screws

(one each side)

Lift up top cover

Remove top cover

Remove PCB locking bar

Fig. 3.2 Removing the Chassis Top Cover and PCB Locking Bar

4) Remove the existing media board sub-assembly –

see Fig. 3.3.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

3) Remove the chassis top cover and PCB locking bar –

see Fig. 3.2.

Remove pozidriv screws

(1 each side)

Disconnect configurator

board ribbon cable

Lift main board from

motherboard and withdraw

media board

Lift black

retaining flap

Disconnect

flexi-circuit

Media board

Main board

✶

Note. Flexi-circuit is not present if

neither Compact Flash nor SmartMedia

option is already fitted to the instrument.

Information. Refitting is the

reverse of removal.

Fig. 3.3 Removing the Media Board Sub-Assembly

8) Refit the instrument to the case – see Fig. 3.1.

9) Restore the power supply to the instrument.

1Check that PCB link LK1

is fitted and is in the

correct position for

Compact Flash hardware.

5V Position

SmartMedia

3.3V Position

Compact Flash

LK1

Fig. 3.4 PCB Link LK1 Positions

6) Fit the new media board sub-assembly – see Fig. 3.3.

7) Refit the PCB locking bar and chassis top cover –

see Fig. 3.5.

…3 Fitting Media Board

Sub-Assembly – Figs. 3.1 to 3.5

5) Check the position of PCB link LK1 – see Fig. 3.4.

EMC Contacts

Position top cover as shown

Slide forward

Lower rear

Refit pozidriv screws

(one each side)

Refit PCB locking bar

ensuring the slots

in the bar locate correctly

on the boards and chassis

Caution. When positioning the

chassis top cover, take care not to

damage the EMC contacts.

Fig. 3.5 Refitting the PCB Locking Bar and Chassis Top Cover

INF02/61 Issue 1

The Company’s policy is one of continuous product

improvement and the right is reserved to modify the

information contained herein without notice.

Printed in UK (06.02)

ABB Limited

Howard Road, St. Neots

Cambridgeshire, PE19 8EU

Tel: +44 (0)1480 475 321

Fax: +44 (0)1480 217 948

ABB Inc.

125 E. County Line Road

Warminster, PA 18974

USA

Tel: +1 215-674-6000

Fax: +1 215-674-7183

ABB has Sales & Customer Support expertise in over

100 countries worldwide

www.abb.com

Altri manuali per SmartMedia SM2000

Altri manuali ABB Strumento di misura

ABB

ABB CoriolisMaster FCB330 Manuale di installazione e funzionamento

ABB

ABB Stanilite Nexus LX Manuale utente

ABB

ABB ACF-NT Manuale utente

ABB

ABB B21 Manuale utente

ABB

ABB aquamaster Manuale utente

ABB

ABB FSM4000-SE41F Manuale utente

ABB

ABB ProcessMaster FEM630 Manuale utente

ABB

ABB Navigator 550 Sodium wet-section Manuale per l'uso e la cura

ABB

ABB Relion 670 series Manuale utente

ABB

ABB C1300 Manuale utente

ABB

ABB AnalyzeIT AX460 Manuale utente

ABB

ABB AWT210 Manuale utente

ABB

ABB aquamaster Manuale utente

ABB

ABB 2410 Manuale utente

ABB

ABB MACHsense-R Manuale utente

ABB

ABB 2117 U-500 Manuale utente

ABB

ABB INSITE PRO M COMPACT SCU100 Manuale utente

ABB

ABB C1900 Series Manuale utente

ABB

ABB EXGP Manuale utente

ABB

ABB Sensyflow FMT700-P Manuale utente

ABB

ABB Sensyflow iG Manuale utente

ABB

ABB Endura AZ series Manuale utente

ABB

ABB NGC Series Manuale utente

ABB

ABB SensyMaster FMT230 Manuale di installazione e funzionamento

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente