Accton Technology EH2045S Manuale utente

EtherHub-5st Quick Start Guide

5-Port 10BASE-T Smart Ethernet Hub

Thank you for purchasing our product. This quick start guide contains information necessary to

install and operate Accton’s EtherHub-5st smart Ethernet hub. This guide is designed for the

experienced network installer.

Package Contents

Your package includes the following:

• EtherHub-5st (EH2045S).

• Quick Start Guide

• Power Adapter (optional)

Hardware Description

Frant and Side Panels, and Hub Stand

To stand the hub upright on a desk or nearby shelf, slide the stand onto the base of the hub. To

lay the hub flat on a convenient surface, slide the stand onto the back of the hub. Or to mount it

directly on a wall or office partition, first attachthe stand (i.e., mounting bracket) to the required

location with two small screws and then slide the back of the hub onto the bracket.

Use the stand to mount the

hub standing upright , lying

flat , or directly on a wall.

EtherHub-5st User’s Guide

LED Indicators

This hub provides LED indicators for monitoring various network conditions. A glance at the

front panel allows you to instantly monitor the status of each station port plus the overall

condition of the hub.

RJ-45 Ports

There are 5 RJ-45 MDI-X station ports and 1 RJ-45 MDI daisy-chain port, each providing a 10

Mbps Ethernet channel. To connect to a workstation or server, attach straight-through unshielded

or shielded twisted-pair cabling to any station port. To connect to another compatible hub, attach

straight-through twisted-pair cabling to the daisy-chain port. However, note that when the daisy-

chain port is used, station port 5MDI-X cannot be used. To connect to another hub, you may also

run straight-through twisted-pair cabling from a station port on this hub to a crossover port on the

other hub. However, if you must connect to another hub via stations ports at both ends of the

cable, use crossover cabling.

Power Socket

The power adapter (optional) plugs into this socket. The power adapter socket accepts AC power

equal to 100V, 120V, 220-230V, or 240V at 50 to 60Hz.

Hardware Installation

1. Select an appropriate location.

2. Connect your workstation to any available RJ-45 port on the hub using unshielded or shielded

twisted-pair (UTP or STP) cable. All end-node devices must be within 100 meters of the

connected hub. Using the hub in a stand-alone configuration, you can network up to 5

workstations.

Daisy-Chain Configuration

LED Color Indication

Power Green Power indicator.

Utilization 40% Yellow Traffic is 40% or more of Ethernet bandwidth

(10Mbps).

Collision Orange Collision indicator; flashes to show network

collision.

Unlit No activity.

Link-RX/Partition Green RJ-45 (10BASE-T) port linked;

flashes to indicate traffic is being received.

Red RJ-45 port partitioned.

EtherHub-5st User’s Guide

Connect the hub to another hub in a daisy-chain configuration, if necessary. When daisy-

chaining, use port 5MDI instead of station port 5MDI-X.

To limit the number of hubs in a path (when daisy-chaining more than two hubs), link several

hubs to one central hub. And make sure there is only one path between any two stations on

the network.

3. Plug the power cable into the hub, and connect it to an electrical outlet.

Troubleshooting

Symptom: Partition indicator lights up.

Causes: Hub has partitioned 10BASE-T (RJ-45) port.

Solution: If port partitioning has occurred, the hub will automatically enable the port

when the faulty condition disappears.

Symptom: Link-RX indicator remains unlit.

Causes: Workstation’s network adapter, cable or hub port is defective.

Solution: The most common cause is a defective network adapter or cable connection.

Check the corresponding cable connections, or theworkstation’s network

adapter for possible defects. Verify that the correct cable type (straight or

crossover) is being used. (Note that crossover cable is only required if you

cascade hubs via the RJ-45 station ports; i.e., the Daisy-Chain port is not

used.) Replace the defective cable or adapter.

Other Important Tips

1. Ensure that cable distances, repeater limits, and other physical aspects of the installation do

not exceed IEEE 802.3 recommendations.

2. Verify the cabling type used is correct. Tighten all cable connections.

3. Make sure the network adapter cards installed in the workstations and cable connections are

in good working condition.

4. Ascertain that your network is properly configured. Make sure that all hubs are connected

to the network. Sometimes, hubs may be unintentionally disconnected from the network.

5. You cannot use RJ-45 station port 5MDI-X and the daisy-chain port 5MDI at the same time.

Make sure that when you use the RJ-45 daisy-chain port, station port 5 is not connected to any

node.

EtherHub-5st User’s Guide

Hub’s RJ-45 Pin Assignments

Schematics for both straight and crossover twisted-pair cable are shown below. (Note that

crossover cable is only required if you cascade hubs via the RJ-45 station ports; i.e., the 5MDI

Daisy-Chain port is not used.)

Straight-Through Crossover

(Hub) (Adapter) (Hub) (Hub)

1 IRD+ 1 OTD+ 1 IRD+ 1 IRD+

2 IRD- 2 OTD- 2 IRD- 2 IRD-

3 OTD+ 3 IRD+ 3 OTD+ 3 OTD+

6 OTD- 6 IRD- 6 OTD- 6 OTD-

Specifications

Transmission Technique : Baseband

Topology : Tree or Star

Access Method : CSMA/CD, 10 Mbps

Standard Conformance : IEEE 802.3 10BASE-T

Media Supported : Category 3,4,5 twisted-pair cable

Interfaces : 5 RJ-45 station ports, 1 RJ-45 daisy-chain port

Hub-to-Workstation Distance : 100m max.

DimensionsDimensions : 120mm x 96mm x 28mm (4.72" x 3.78" x 1.10")

System Power : Requirements - 8VAC, 50/60 Hz, 5 watts

Power Adapter : Optional external power adapter - 8 VAC, 8VA

for100V/120V/220-230V/240V

Temperature : 0°C to 50°C (Standard Operating)

Humidity : 5% to 95% (Noncondensing)

Certification : CE Mark

Emissions : FCC Class B, VCCI Class 2, CISPR Class B

Immunity : IEC 801-2,3,4, EN60555-2 Class D, EN60555-3

Safety : UL, CSA, TÜV/GS

Pin MDI-X Assignment

(port 1~5) MDI-Assignment

(Daisy-Chain Port)

1 Input Receive Data + Output transmit Data +

2 Input Receive Data - Output transmit Data -

3 Output transmit Data + Input Receive Data +

6 Output transmit Data - Input Receive Data -

4,5,7,8 Not Used Not Used

EtherHub-5st User’s Guide

EMI Warning

FCC Class B Certification

Accton Technology Corporation

Model Number: EH2045S

FCC ID: HEDEH2045S

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

Warning

!This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from the one which the receiver is

connected to

• Consult the dealer or an experienced radio/TV technician for help

You are cautioned that changes or modifications not expressly approved by the party responsible

for compliance could void your authority to operate the equipment.

You may use unshielded twisted-pair (UTP) for RJ-45 connections.

Warning

Wear an antistatic wrist strap or take other suitable measures to prevent electrostatic

discharge whenever handling this equipment.

You may find the following book prepared by the Federal Communication Commision helpful:

The Interference Handbook

This booklet is available from the U.S. Government Printing Office. Washington, D.C. 20402.

Stock No. 004-000-00345-4.

EtherHub-5st User’s Guide

Note:

In order to maintain compliance with the limits of a Class B digital device, Accton requires

that you use a quality interface cable when connecting to this device. Changes or

modifications not expressly approved by Accton could void the user’s authority to operate

this equipment. Suggested cable type is: twisted-pair (10BASE-T).

VCCI Class 2 Compliance

This product also complies with CISPR22 Class B (EN55022 Class B).

EN55022 Declaration of Conformance

This is to certify that the Accton Ethernet Hub is shielded against the generation of radio

interference in accordance with the application of Council Directive 89/336/EEC, Article 4a.

Conformity is declared by the application of EN55022:1987 Class B (CISPR 22:1985/BS

6527:1988).

CE Mark Declaration of Conformance

This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to

the following specifications:

EMC: EN55022(1988)/CISPR-22(1985) class B

EN60555-2(1995) class D

EN60555-3

prEN55024-2(1990)/IE801-2(1991) 4kV CD, 8kV AD

prEN55024-3(1991)/IE801-3(1984) 3V V/m

prEN55024-4(1992)/IE801-4(1988) 1kV - (power line)

0.5kV - (signal line)

This product complies with the requirements of the Low Voltage Directive 73/23/EEC and the

EMC Directive 89/336/EEC.

Warning!

The connectors are not for telephone system use.

Les raccordeurs ne sont pas utilisé pour le système téléphonique!

For use with Silicore Power Adapter Model No: SLA40810.

POUR UTILISER AVEC MODELE SLA40810.

EtherHub-5st User’s Guide

Sicherheitshinweise

1. Die Steckdose muß sich in der Nähe des Gerätes befinden und leicht zugänglich sein.

2. Zum Reinigen den Stecker aus der Steckdose ziehen. Beim Reinigen keine Flüssigreiniger

oder Sprays verwenden, sondern ein angefeuchtetes Tuch.

3. Das Ethernet hub gerät nicht in Naßräume oder in der Nähe von Wasser benutzen, wie z.B.

Badezimmer, Schwimmbad, Spülbecken usw. . Das Eindringen von Wasser kann zur

Zerstörung des Gerätes führen.

4. Das Ethernet hub gerät nicht auf einer unstabilen Unterlage, wie z.B. Rollwagen, Gestell

usw., aufstellen. Es könnte herunterfallen und Verletzungen oder Beschädigungen von

Mensch und Gerät verursachen.

5. Die Belüftungsöffnungen nicht blockieren oder auf falscher Ober-fläche, wie Bett, Sofa usw.,

stellen. Durch die Blockierung kann es zur Zersörung des Gerätes durch Überhitzung

kommen.

6. Versuchen Sie niemals dieses Gerät selbst zu warten, da beim Öffnen oder Abnehmen des

Gehäuses die Gefahr eines elektrischen Schlages besteht.

7. Keine Gegenstände auf das Anschlußkabel stellen, damit es nicht durch scharfe Kanten

zerstört werden kann.

8. Keinerlei Gegenstände durch die Öffungen in das Gerät stecken, da es dadurch sonst zu

Kurzschlüssen kommen kann.

9. Bei Störungen des Gerätes den Wartungsdienst verständigen.

10. Bei Reperaturen dürfen nur Orginalersatzteile oder Bauteile mit gleichen Eigenschaften

verwendet werden. Andere Bauteile können Feuer, elektrischen Schlag oder andere Gefahren

verursachen.

11. Nach Beendigung von Wartungsarbeiten oder Reperaturen durch den Kundendienst sollte die

Sicherheitsprüfung durchgeführt werden.

12. Bei längerem Stillstand des Gerätes, ist diese von der Versorgungs- spannung zu trennen.

Dies verhindert eine Beschädigung des Gerätes durch eine Überspannung in der Zuleitung.

13. Der arbeitsplatzbezogene Lärmschutzpegel nach DIN 45 635 ist kleiner 70dB (A).

14. Stellen Sie sicher, daß die Stromversorgung dieses Gerätes nach der EN 60950 gepr üft ist.

Ausgangswerte der Stromversorgung solltem die Werte von AC 7.5-8V, 50-60Hz nicht über

oder unterschreiten sowie den minimalon Strom von 1A nicht unterschreiten.

EtherHub-5st User’s Guide

Warranty

Accton warrants to the original owner that the product delivered in this package will be free from defects in

material and workmanship for the lifetime of the product. For the warranty to apply, you must register your

purchase by returning the registration card indicating the date of purchase and including proof of purchase.

There will be a minimal charge to replace consumable components, such as fuses, power transformers, and

mechanical cooling devices. The warranty does not cover the product if it is damaged in the process of being

installed. Accton recommends that you have the company from whom you purchased this product install it.

THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED

OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING OUT OF ANY PROPOSAL,

SPECIFICATION OR SAMPLE. ACCTON SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES. ACCTON NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO

ASSUME FOR IT ANY OTHER LIABILITY.

subject to change without notice. All trademarks or brand names are properties of their respective

companies.

Disclaimer

The publisher assumes no responsibility for errors that may appear in this document, nor does it make any

commitment to update information it contains.

All brand and product names mentioned are trademarks or registered trademarks of their respective

companies.

For warranty information:

All territories except North and South America:

Accton Technology Corporation, International Headquarters

No. 1, Creation Rd. III, Science-based Industrial Park, Hsinchu 300, Taiwan, R.O.C.

Phone: 886-3-5770-270 Fax: 886-3-5770-267 BBS: 886-3-5770-654

North and South America:

Accton Technology Corporation, USA Headquarters

1962 Zanker Road, San Jose, CA 95112, U.S.A.

Phone: 408-452-8900 Fax: 408-452-8988 BBS: 408-452-8828 EH2045S

E1195-R01

150225-101

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Accton Technology Interruttore

Accton Technology

Accton Technology Edge-Core ES4528V Manuale utente

Accton Technology

Accton Technology ETHERHUB-16MI+ E0398-R01 Manuale utente

Accton Technology

Accton Technology CheetaHub Power-3008P Manuale utente

Accton Technology

Accton Technology CheetahSwitch Workgroup-2027 Manuale utente

Accton Technology

Accton Technology Zilla Dual-Speed Hub-3008R Manuale utente

Accton Technology

Accton Technology ES4512C Manuale di programmazione

Accton Technology

Accton Technology EtherHub-16 Manuale utente

Accton Technology

Accton Technology ETHERHUB-16MI+ E0398-R01 Manuale utente

Accton Technology

Accton Technology ES3616 Manuale di programmazione

Accton Technology

Accton Technology Volare Sensor 2 Manuale utente

Accton Technology

Accton Technology CheetaHub Classic-2041 Manuale utente

Accton Technology

Accton Technology Classic-2040 Manuale utente

Accton Technology

Accton Technology Fast EtherHub-12se Manuale utente

Accton Technology

Accton Technology USB204B Manuale utente

Accton Technology

Accton Technology ES4626 Manuale di programmazione

Accton Technology

Accton Technology ES4710BD Manuale utente

Accton Technology

Accton Technology Cheetah iSharer-3010 Manuale utente

Accton Technology

Accton Technology Fast EtherHub-8s Manuale utente

Accton Technology

Accton Technology EH3016G Manuale utente

Accton Technology

Accton Technology CheetaHub Power-3008A Manuale utente

Accton Technology

Accton Technology CHEETAHUB POWER-3012A Manuale utente

Accton Technology

Accton Technology SwitcHub-2se Manuale utente

Accton Technology

Accton Technology CheetaHub Power-3004E Manuale utente

Accton Technology

Accton Technology CheetaHub Power-3008N Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente