ACE COMPUTERS PW-GT20 Manuale utente
PW-GT20 Server
User Manual
Revision 2.0
Revision Date: 3.22.2022
ACE088 Page 2 of 32 Rev Date: 3.22.2022
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor
assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment
to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please see our website at www.acecomputers.com.
Ace Computers reserves the right to make changes to the product described in this manual at any time and without
notice. This product, including software and documentation, is the property of Ace Computers and/ or its licensors,
and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly
permitted by the terms of said license.
IN NO EVENT WILL Ace Computers BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR
CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING
THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE,
OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Cook County in the State
of Illinois, USA. The State of Illinois, County of Cook shall be the exclusive venue for the resolution of any such
disputes. Ace Computer's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in an industrial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction
manual, may cause harmful interference with radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
The products sold by Ace Computers are not intended for and will not be used in life support systems, medical
equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or
other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or
catastrophic property damage. Accordingly, Ace Computers disclaims any and all liability, and should buyer use or
sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer
agrees to fully indemnify, defend and hold Ace Computers harmless for and against any and all claims, demands,
actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Unless you request and receive written permission from Ace Computers, you may not copy any part of this
document. Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Printed in the United States of America
Note: This User Manual was derived from a SuperMicro User Manual, with permission from SuperMicro, to include
ACE Computers specific documentation.
ACE088 Page 3 of 32 Rev Date: 3.22.2022
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It provides information
pertaining to EPEAT for the ACE Computers EPEAT registered servers.
Notes
If you have any questions regarding this manual or server system, please contact our support team
through Ace Computers Support page https://acecomputers.com/support/ .This manual may be
periodically updated without notice.
Please check the Ace Computers website for possible updates to the manual revision level.
ACE088 Page 4 of 32 Rev Date: 3.22.2022
Table of Contents
Table of Contents
Chapter 1 - European Union (EU) Ecodesign Requirements ........................... Error! Bookmark not defined.
Chapter 2 - Illustrated System Disassembly Instructions ........................................................................... 6
1. Data Storage Devices ......................................................................................................................... 7
2. Memory ............................................................................................................................................. 8
3. Processor ........................................................................................................................................... 9
4. Motherboard ................................................................................................................................... 11
5. Expansion Card/Graphics Card ........................................................................................................ 12
6. Power Supply Module ..................................................................................................................... 13
7. Side Panel ........................................................................................................................................ 14
8. Batteries .......................................................................................................................................... 15
9. Chassis Front Cover ......................................................................................................................... 16
10. Fans ............................................................................................................................................. 18
11. External Power Cable .................................................................................................................. 19
Chapter 3 – Installation, Maintenance and Replacement Instructions ..................................................... 20
3.0 Removing Power ......................................................................................................................... 20
3.1 Accessing the System .................................................................................................................. 21
3.2 Motherboard Components ......................................................................................................... 22
3.3 Memory (Replacement/Installation) ........................................................................................... 27
3.3 Memory (Replacement/Installation) ................................................ Error! Bookmark not defined.
3.4 Data Storage Devices (Replacement/Installation) ....................................................................... 28
3.5 Fans (Replacement/Installation) .................................................................................................. 29
3.6 Power Supply (Replacement/Installation) ................................................................................... 30
3.6 Expansion Card/Graphics Card (Replacement/Installation) ........................................................ 31
Chapter 4 – Product Take-Back, End-Of-Life Processing, and E-Waste Program ....................................... 32
Chapter 5 – Product Services ................................................................................................................. 32
5.1 Where to Get Replacement Components/Product Services ....................................................... 32
5.2 Returning Merchandise for Service ............................................................................................. 32
ACE088 Page 5 of 32 Rev Date: 3.22.2022
Chapter 1 – Testing/Compatibility Information
1. Operating Condition Class
The operating condition class is A2. Based on the results of testing, it was determined that as long
as the server functions inside the Allowable Range as noted for “Operating Condition A2” (noted
in the table below), there will be no material affect to the system and will continue to operate as
intended for the entire lifecycle of the product.
The life expectancy of the server system is eight year on average. If the server runs for 18 hours a
day, seven days a week for eight years, the operating hours that the server can operate in the
allowable range for class A2 without becoming materially affected would be 52,560 hours.
ACE088 Page 6 of 32 Rev Date: 3.22.2022
Chapter 2 - Illustrated System Disassembly Instructions
Chapter 8 is intended to provide guidance to recyclers on the presence of materials and components at
the product/family level, per Article 15 of the EU WEEE Directive 2012/19/EU. The provided information
should also help direct recyclers to proper methods for removing parts and general product disassembly
instructions. This Chapter also outlines specific substances, mixtures, and components that must be
removed from any separately collected electronic waste component and shall be disposed or recovered
in compliance with Directive 2008/98/EC.
Please note: All the illustrations in the below disassembly instructions are for demonstration only. The
system and components shown in this section are a representative sample.
CAUTION: Always power off the system and unplug the power cord(s) first before disassembling the
system!
Representative Server Component Layout
Motherboard
Power Supply
Processor
Fans
Removeable
Hard drives
Memory
GPU (These are not included in
a standard model)
ACE088 Page 7 of 32 Rev Date: 3.22.2022
2. Data Storage Devices
Location: Servers are best known for their storage and interchangeability, within this tower
model of server there’s internal and external storage capacity. The internal storage is noted in the
diagram below. Some models may also include interchangeable storage that can be accessed
from the front panel. Some servers may also have SSD storage, this type of storage can be found
on the motherboard. It generally lays flat, parallel to the board, rather than at a right angle. Most
common applications insert one end of the SSD into a slot on the motherboard while the
alternate end is held in place with a small screw.
Type and number of fastenings: HDD = One (1) latch and four (6) Phillips screws, SSD = (1) Phillips
screw.
Tools required: Screwdriver with PH2 bit.
Procedure:
Step 1: HDD (3.5”) = Push the release button on the carrier. Swing the carrier perpendicular to
the chassis. Grasp the handle and pull the drive carrier out of its bay, once the drive carrier is out
of the bay, the Phillips screws can be removed.
Step 2: SSD (2.5”) = Identify the SSD on the motherboard, remove the screw, and pull straight
back in a parallel position to remove the SSD from the slot on the motherboard.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: There are two printed
circuit board present that are greater than 10 square centimeters, one within the HDD and one
within SSD that must be removed separately from the data storage device and shall be disposed
or recovered in compliance with Directive 2008/98/EC.
Step 1 Step 2
ACE089 Page 8 of 32 Rev Date: 10.01.2021
3. Memory
Location: Memory modules are found on the motherboard of the server, the number of memory
modules may vary by unit configuration but are generally found in pairs of 2.
Type and number of fastenings: Two (2) latches per memory module.
Tools required: None.
Procedure: Press both release tabs on the ends of the memory module to unlock it. Once the
module is loosened, remove it from the memory slot.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: The memory stick is a
printed circuit board greater than 10 sq. cm and shall be disposed or recovered in compliance
with EU Directive 2008/98/EC.
ACE089 Page 9 of 32 Rev Date: 10.01.2021
4. Processor
Location: The processor is found on the motherboard of the server. As shown in the photo below,
the processor is located under the heat sink. The heatsink can look more like a fin type thermal
transfer device, or a rotating fan with a thermal transfer plate. There can be more than one
processor per motherboard, generally between 1- 4.
Type and number of fastenings: Four (4) T30 Torx screws.
Tools required: Screwdriver with T30 Torx bit.
Procedure: Remove the screws in the sequence of 4, then 3, then 2, then 1, as marked in the
illustration below. After removing the screws, lift the processor heatsink module off the
processor socket. Unsnap corners A and B, then C and D of the latch. Push the latch out from the
bottom.
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: The CPU does not
contain any printed circuit boards.
ACE089 Page 10 of 32 Rev Date: 10.01.2021
Indice
Altri manuali ACE COMPUTERS Server
