ADF Web HD67912-A1 Manuale utente
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 1 of 3
User Manual
Revision 1.
English
PROFINET / HART Master - Converter
(Order Code: HD67912-A1)
For Website information:
www.adfweb.com?Product=HD67912
For Price information:
www.adfweb.com?Price=HD67912-A1
Benefits and Main Features:
Very easy to configure
Triple Electrical isolation
Temperature range: -4 °C/+85°C (-4 °F/+185°F)
For other HART products see also the following link:
Converter HART Master to
www.adfweb.com?Product=HD679 (Seria )
www.adfweb.com?Product=HD679 1 (BACnet S ave)
www.adfweb.com?Product=HD679 2 (CAN)
www.adfweb.com?Product=HD679 3 (CANopen)
www.adfweb.com?Product=HD679 4 (DeviceNet S ave)
www.adfweb.com?Product=HD679 5 (Ethernet)
www.adfweb.com?Product=HD679 6 (EtherNet/IP S ave)
www.adfweb.com?Product=HD679 7 (J1939)
www.adfweb.com?Product=HD679 8 (Modbus S ave)
www.adfweb.com?Product=HD679 9 (Modbus TCP S ave)
www.adfweb.com?Product=HD6791 (MQTT)
www.adfweb.com?Product=HD67911 (PROFIBUS S ave)
www.adfweb.com?Product=HD67913 (SNMP Agent)
Do you have your customer protocol? Then go to:
www.adfweb.com?Product=HD67 3
Do you need to choose a device? Do you want help?
www.adfweb.com?Cmd=helpme
User Manual
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 2 of 3
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
POWER SUPPLY 7
FUNCTION MODES 8
LEDS 9
HART 1
ETHERNET 11
USE OF COMPOSITOR SW67912 12
NEW CONFIGURATION / OPEN CONFIGURATION 13
SOFTWARE OPTIONS 14
SET COMMUNICATION 16
HART VARIABLES 17
UPDATE DEVICE 19
MECHANICAL DIMENSIONS 21
SCAN FUNCTION 22
HART DIAGNOSTIC OVER PROFINET 24
PLC CONFIGURATION 25
DISCLAIMER 27
OTHER REGULATIONS AND STANDARDS 28
WARRANTIES AND TECHNICAL SUPPORT 29
RETURN POLICY 3
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision
Date Author Chapter
Description
1. 18/ 6/2 19
Tf All First Release
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 3 of 3
SECURITY ALERT:
G
ENERAL
I
NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I
NTENDED
U
SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q
UALIFIED
P
ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R
ESIDUAL
R
ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE
CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 4 of 3
EXAMPLES OF CONNECTION:
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 5 of 3
CONNECTION SCHEME:
Figure 1: Connection scheme for HD67912-A1
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 6 of 3
CHARACTERISTICS:
The HD67912-A1 are PROFINET / HART Master - Converters.
It allows for the following characteristics:
Triple isolation between Ethernet - Power Supply, Ethernet - HART, HART - Power Supply;
Two-directional information between Ethernet bus and HART bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -4 °C / 85°C [-4 °F / +185°F].
CONFIGURATION:
You need Compositor SW67912 software on your PC in order to perform the following:
Define the parameters of PROFINET line;
Define the parameters of HART line;
Define HART variables in read/write;
Define HART rules for gateway functions;
Update the device.
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 7 of 3
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67912-A1 3.5
HD67912-A1
Caution:
Do n
ot reverse the po arity power
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 8 of 3
FUNCTION MODES:
The device has got two function modes depending on the position of the ‘Dip2 of Dip-Switch A’:
The first, with ‘Dip2 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip2 of Dip-Switch A’ at “ON” position, is used for uploading the Project and/or Firmware.
For the operations to follow for the updating, see ‘UPDATE DEVICE’ section.
According to the functioning mode, the LEDs will have specific functions, see ‘LEDS’ section.
Warning:
Dip1 of ‘Dip-Switch A’ must be at ON position to work even if the Ethernet cable is not inserted.
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 9 of 3
LEDS:
The device has got six LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Norma Mode Boot Mode
1: HART communication
(green) It blinks when HART communication is running B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress
2: Ethernet link (green) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
3: PROFINET communication
(green) It blinks when PROFINET communication is running B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in progress
4 : Device State
(green) Blinks slowly (~1Hz)
B inks quick y: Boot state
B inks very s ow y (~0.5Hz): update in
progress
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET
/ HART Master
Document code: MN67912_ENG Revision 1. Page 1 of 3
HART:
“HART” is an acronym for Highway Addressable Remote Transducer. The HART Protocol makes uses Frequency Shift Keying (FSK) standard
to superimpose digital communication signals at a low level on top of the 4-2 mA. This enables two-way field communication to take place
and makes it possible for additional information beyond just the normal process variable to be communicated to/from a smart field
instrument.
It is possible to provide the current loop for HART communication and an additional low power supply @ 24 V DC for feeding HART devices
by setting Dip-Switch D at ON position.
Current loop for HART is required when there is not an external device in the bus that provides it.
Indice
Altri manuali ADF Web Convertitore multimediale
ADF Web
ADF Web HD67453 Manuale utente
ADF Web
ADF Web HD67508-A1-232 Manuale utente
ADF Web
ADF Web HD67508-A1-232 Manuale utente
ADF Web
ADF Web HD67E10-A1 Manuale utente
ADF Web
ADF Web HD67C54 Manuale utente
ADF Web
ADF Web HD67941-B2-Y Manuale utente
ADF Web
ADF Web HD67765-2-A1 Manuale utente
ADF Web
ADF Web HD67458 Manuale utente
ADF Web
ADF Web HD67D17-IP-B2-868MHz Manuale utente
ADF Web
ADF Web HD67589-A1 Manuale utente
ADF Web
ADF Web HD67B34-B2 Manuale utente
ADF Web
ADF Web HD67C65-B2 Manuale utente
ADF Web
ADF Web HD67510-Slim-232 Manuale utente
ADF Web
ADF Web HD67235-A1 Manuale utente
ADF Web
ADF Web HD67B39-B2 Manuale utente
ADF Web
ADF Web HD67E73-A1 Manuale utente
ADF Web
ADF Web HD67615-A1 Manuale utente
ADF Web
ADF Web HD67171-A1 Manuale utente
ADF Web
ADF Web HD67D02-2-B2-868MHz Manuale utente
ADF Web
ADF Web HD67661-A1 Manuale utente
