ADF Web PROFINET/SNMP Agent Manuale utente
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 1 of 28
User Manual
Revision 1.100
English
PROFINET / SNMP Agent - Converter
(Order Code: HD67613-A1)
For Website information:
www.adfweb.com? roduct=HD67613
For rice information:
www.adfweb.com? rice=HD67613-A1
Benefits and Main Features:
Very easy to configure
Triple Electrical isolation
Temperature range: -40°C/+85°C (-40°F/+185°F)
For other ROFINET products see also the following link:
Converter PROFINET to
www.adfweb.com? roduct=HD67078 (M-Bus
www.adfweb.com? roduct=HD67090 (M-Bus Wireless
www.adfweb.com? roduct=HD67178 (SNMP Manager
www.adfweb.com? roduct=HD67600 (NMEA 2000
www.adfweb.com? roduct=HD67601 (Serial
www.adfweb.com? roduct=HD67602 (Modbus Master
www.adfweb.com? roduct=HD67603 (Modbus Slave
www.adfweb.com? roduct=HD67604 (PROFIBUS Master
www.adfweb.com? roduct=HD67605 (PROFIBUS Slave
www.adfweb.com? roduct=HD67606 (CAN
www.adfweb.com? roduct=HD67607 (CANopen
www.adfweb.com? roduct=HD67608 (DeviceNet Master
www.adfweb.com? roduct=HD67609 (DeviceNet Slave
www.adfweb.com? roduct=HD67610 (J1939
www.adfweb.com? roduct=HD67611 (Modbus TCP Master
www.adfweb.com? roduct=HD67612 (Modbus TCP Slave
www.adfweb.com? roduct=HD67614 (DMX
www.adfweb.com? roduct=HD67660 (EtherNet/IP
www.adfweb.com? roduct=HD67679 (BACnet Slave
www.adfweb.com? roduct=HD67719 (BACnet Master
www.adfweb.com? roduct=HD67818 (KNX
www.adfweb.com? roduct=HD67848 (DALI
Do you have your customer protocol? Then go to:
www.adfweb.com? roduct=HD67003
Do you need to choose a device? Do you want help?
www.adfweb.com?Cmd=helpme
User Manual
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 2 of 28
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LES OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
OWER SU LY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 10
USE OF COM OSITOR SW67613 11
NEW CONFIGURATION / O EN CONFIGURATION 12
SOFTWARE O TIONS 13
SET COMMUNICATION 14
SET SNM ACCESS 15
ROFINET XML 17
SNM MIB 17
U DATE DEVICE 18
SNM COMMUNICATION 20
MECHANICAL DIMENSIONS 25
ORDERING INFORMATIONS 26
ACCESSORIES 26
DISCLAIMER 27
OTHER REGULATIONS AND STANDARDS 27
WARRANTIES AND TECHNICAL SU ORT 28
RETURN OLICY 28
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners.
Revision
Date Author Chapter
Description
1.000 25/05/2015
Ff All First Release
1.100 02/03/2017
Ff All New software version
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 3 of 28
SECURITY ALERT:
G
ENERAL
I
NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I
NTENDED
U
SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q
UALIFIED
P
ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R
ESIDUAL
R
ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE
CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 4 of 28
EXAMPLES OF CONNECTION:
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 5 of 28
CONNECTION SCHEME:
Figure 1: Connection scheme for HD67613-A1
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 6 of 28
CHARACTERISTICS:
The HD67613-A1 is a ROFINET / SNM Converter.
It allows for the following characteristics:
Up to 1024 bytes in reading and 1024 bytes in writing;
Isolation between Ethernet - ower Supply;
Two-directional information between SNM bus and ROFINET bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67613 software on your C in order to perform the following:
Define the parameters of ROFINET line;
Define the parameters of SNM line;
Define the SNM OID in Read and in Write;
Define the SNM Trap messages;
Update the device.
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 7 of 28
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67613-A1 3.5
HD67613-A1
Caution:
Do n
ot reverse the polarity power
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 8 of 28
FUNCTION MODES:
The device has got two function modes depending on the position of the ‘Dip2 of Dip-Switch A’:
The first, with ‘Dip2 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device.
The second, with ‘Dip2 of Dip-Switch A’ at “ON” position, is used for uploading the roject and/or Firmware.
For the operations to follow for the updating, see ‘U DATE DEVICE’ section.
According to the functioning mode, the LEDs will have specific functions, see ‘LEDS’ section.
Warning:
Dip1 of ‘Dip-Switch A’ must be at ON position to work even if the Ethernet cable is not inserted.
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 9 of 28
LEDS
The device has got six LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal Mode Boot Mode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Maintenance problem is present
OFF: No maintenance problems are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the I
address exists several times in the network; the own
NameOfStation exists several times in the network; no
I address has been set
Flashing: At least one configured AR is no longer in
the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
4: SF [group error] (red) ON: At least one AR is not in the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
5: Ethernet1 Tx (green) Blinks when Ethernet frames are transmitted Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
6: Ethernet2 Tx (green) Blinks when Ethernet frames are transmitted Blinks quickly: Boot state
Blinks very slowly (~0.5Hz : update in progress
Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP
Agent
Document code: MN67613_ENG Revision 1.100 age 10 of 28
ETHERNET:
The ROFINET and SNM connection and the updating of the converters must be made using Connector3 and/or Connector4 of HD67613-A1
with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms
relative to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to
connect the device to a C/ LC/other is recommended the use of a cross cable.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ADF Web Convertitore multimediale
ADF Web
ADF Web HD67738-IP-A1 Manuale utente
ADF Web
ADF Web HD67252-A1 Manuale utente
ADF Web
ADF Web HD67939-B2 Manuale utente
ADF Web
ADF Web HD67D20-B2 Manuale utente
ADF Web
ADF Web HD67423 Manuale utente
ADF Web
ADF Web HD67626-A1 Manuale utente
ADF Web
ADF Web HD67D29-B2-868MHz Manuale utente
ADF Web
ADF Web HD67935-B2 Manuale utente
ADF Web
ADF Web HD67D40-B2 Manuale utente
ADF Web
ADF Web HD67E58-A1 Manuale utente
ADF Web
ADF Web HD67815-KNX-B2 Manuale utente
ADF Web
ADF Web HD67689-IP-A1 Manuale utente
ADF Web
ADF Web HD67B31 Series Manuale utente
ADF Web
ADF Web HD67941-B2 Manuale utente
ADF Web
ADF Web HD67072-B2 Manuale utente
ADF Web
ADF Web HD67B39-B2 Manuale utente
ADF Web
ADF Web HD67912-A1 Manuale utente
ADF Web
ADF Web HD67839 Series Manuale utente
ADF Web
ADF Web HD67718-IP-A1 Manuale utente
ADF Web
ADF Web HD67146-A1 Manuale utente
