ADLINK Technology com express Manuale utente
Flat Panel Transfer Board (FPTB)
User's Manual
Manual Revision: 2.00
Revision Date: August 9, 2012
Part Number: 50-1J040-1000
Document History
Revision Date Changes
2.00 2012/08/09 Initial Release
2 FPTB User's Manual
Preface
Copyright 2012 ADLINK Technology, Inc.
Disclaimer
The information in this document is subject to change without prior notice in order to improve reliability,
design, and function and does not represent a commitment on the part of the manufacturer. In no event will
the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of
the use or inability to use the product or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of ADLINK Technology Inc.
Trademark Information
COM Express®is a registered trademark of the PCI Industrial Computer Manufacturers Group (PICMG).
Product names mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.
FPTB User's Manual 3
Table of Contents
Preface ................................................................................................................. 3
1Introduction................................................................................................. 5
1.1 Overview....................................................................................................... 5
1.2 Functional Block Diagram............................................................................. 5
1.3 Mechanical Drawing ..................................................................................... 6
1.4 Applications .................................................................................................. 7
2Connectors and Jumpers .......................................................................... 9
2.1 Board Layout ................................................................................................ 9
2.2 Connector Pin Definitions........................................................................... 10
2.3 Jumper Settings.......................................................................................... 13
3Getting Started.......................................................................................... 14
3.1 Jumper Settings.......................................................................................... 14
3.2 LVDS Input to FPTB................................................................................... 15
3.3 TTL Output to Display Panel....................................................................... 16
3.4 FPTB Power Connector.............................................................................. 16
3.5 Power Up the System................................................................................. 16
Technical Support ............................................................................................. 17
4 FPTB User's Manual
1
Introduction
1.1
Overview
The Flat Panel Transfer Board (FPTB) is intended for prototyping and verification of LVDS
and TTL flat panel displays with COM Express systems. The FPTB is equipped with an
LVDS-to-TTL converter to allow users to implement TTL displays with COM Express systems
that support LVDS only. Onboard PWM circuitry supports backlight control for LVDS and TTL
displays.
1.2
Functional Block Diagram
LVDS Signal Output
(CN6)
TTL Signal Output
(CN5)
LVDS-to-TTL Converter
(DS90CF386)
LVDS Signal Switch Array
(PI3USB20)
Backlight Control
(CN8)
PWM Circuitry
TTL
LVDS
LVDS
LVDS Signal Input
from COM Express carrier
(CN4)
LVDS_SMCLK/SMDAT signals
FPTB User's Manual 5
1.3
Mechanical Drawing
Dimensions in mm.
6 FPTB User's Manual
1.4
Applications
The FPTB is intended for use in the following situations:
•nanoX/Express-BASE →FPTB →Customer’s cable to TTL display: This
configuration provides LVDS-to-TTL conversion and backlight control when using an
ADLINK reference carrier board with a TTL display. User must provide the cable
connection from the FPTB's TTL output and backlight control connectors to the TTL panel
inputs.
TTL Display
FPTB
TTL
Signal
5V and
12V Input
Backlight
control
nanoX/Express-BASE
Carrier Board
LVDS output
LVDS-to-LVDS cable
ADLINK P/N: 30-20449-0000
•Customer carrier (with LVDS output) →Customer’s cable to FPTB →HannStar
LVDS panel: This configuration provides backlight control and convenient verification of
LVDS function when using a customer carrier board with the HannStar 10.1” LVDS flat
panel display. User must provide the cable connection from the customer carrier board
LVDS output to the FPTB's LVDS input connector.
ADLINK P/N: 29-90100-F000
Backlight
control
LVDS
signal
ADLINK P/N: 30-20243-2000
Customer
Carrier Board
LVDS output
5V and
12V Input
FPTB
FPTB User's Manual 7
•Customer carrier (with LVDS output) →Customer’s cable to FPTB →FPTB →
Customer’s cable to TTL panel: This configuration provides LVDS-to-TTL conversion
and backlight control when using a customer carrier board with a TTL display. User must
provide the cable connections from the customer carrier board LVDS output to the
FPTB's LVDS input connector and from the FPTB's TTL output and backlight control
connectors to the TTL panel inputs.
TTL Display
Customer
Carrier Board
LVDS output
FPTB
TTL
Signal
5V and
12V Input
Backlight
control
•Customer carrier (with LVDS output) →Customer’s cable to FPTB →FPTB →
Customer’s cable to other LVDS panel: This configuration provides backlight control
when using a customer carrier board with a customer LVDS flat panel display. User must
provide the cable connection from the customer carrier board LVDS output to the FPTB's
LVDS input connector and from the FPTB's LVDS output and backlight control
connectors to the LVDS panel inputs.
LVDS Display
Customer
Carrier Board
LVDS output
FPTB
LVDS
Signal
5V and
12V Input
Backlight
control
8 FPTB User's Manual
2
Connectors and Jumpers
2.1
Board Layout
FPTB (Flat Panel Transfer Board) Connector and Jumper Locations
Connector Description
CN1 Power Connector
CN4 LVDS Input Connector
CN5 TTL Output Connector
CN6 LVDS Output Connector
CN8 Backlight Control Connector
JP1 Backlight Voltage Jumper
JP2 Panel Voltage Jumper
JP4 LVDS/TTL Mode Selector Jumper
JP5 Backlight Control Mode Jumper
FPTB User's Manual 9
2.2
Connector Pin Definitions
CN1: Power Connector (Floppy power connector)
Pin Signal
1 +5V
2 GND
3 GND
4 +12V
CN4: LVDS Input Connector (2x17 box header, 2.00 mm pitch)
Pin Signal Pin Signal
1 LVDS_CLK_A 2 LVDS_DTA_A
3 PNL_PWR 4 PNL_PWR
5 GND 6 LVDS_A-N0
7 LVDS_A-P0 8 VDD_EN
9 LVDS_A-N1 10 LVDS_A-P1
11 BL_EN_2 12 LVDS_A-P2
13 LVDS_A-N2 14 N.C
15 LVDS_ACLK _ N 16 LVDS_ACLK _ P
17 PNL_PWR 18 LVDS_A-P3
19 LVDS_A-N3 20 GND
21 LVDS_B-N0 22 LVDS_B-P0
23 GND 24 LVDS_B-N1
25 LVDS_B-P1 26 GND
27 LVDS_B-N2 28 LVDS_B-P2
29 GND 30 LVDS_BCLK _ P
31 LVDS_BCLK _ N 32 N.C
33 LVDS_B-P3 34 LVDS_B-N3
10 FPTB User's Manual
Altri manuali per com express
1
Indice
Altri manuali ADLINK Technology Scheda madre
ADLINK Technology
ADLINK Technology AmITX-RZ-G Manuale utente
ADLINK Technology
ADLINK Technology CoreModule 740 Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-775 Series Manuale utente
ADLINK Technology
ADLINK Technology DB-8151 Manuale utente
ADLINK Technology
ADLINK Technology IMB-M47 Manuale utente
ADLINK Technology
ADLINK Technology IMB-M43H Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-842DV/P Manuale utente
ADLINK Technology
ADLINK Technology LitleBoard 800 Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-850 Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-861 Manuale utente
ADLINK Technology
ADLINK Technology MI-220 Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-842 Series Manuale utente
ADLINK Technology
ADLINK Technology MI-220 Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-A40H Manuale utente
ADLINK Technology
ADLINK Technology AmITX-SL-G Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-A301 Manuale utente
ADLINK Technology
ADLINK Technology NuPRO-E330 Manuale utente
ADLINK Technology
ADLINK Technology AmITX-HL-G Manuale utente
ADLINK Technology
ADLINK Technology AmITX-BT-I Manuale utente
ADLINK Technology
ADLINK Technology IMB-M45 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
