ADTRAN 4202023L1 Manuale utente

6PDUW6KHOI

8VHU0DQXDO

4202023L1 Smart 16, 2nd, AC Version

4202023L2 Smart 16, 2nd, Dual AC Version

4202023L3 Smart 16, 2nd, DC Version

4202023L4 Smart 16, 2nd, Dual DC Version

/$

)HEUXDU\

([SORUHU%RXOHYDUG

32%R[

+XQWVYLOOH$/ 

 

$'75$1,QF

$OO5LJKWV5HVHUYHG

3ULQWHGLQ86$

LLL

The following conventions are used in this manual.

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the

equipment or endangerment to human life.

IMPORTANT SAFETY INFORMATION

When using your telephone equipment, please follow these basic safety precautions to reduce

the risk of fire, electrical shock, or personal injury:

1. Do not use this product near water, such as near a bath tub, wash bowl, kitchen sink, laun-

dry tub, in a wet basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a

remote risk of shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not

dispose of batteries in a fire. They may explode. Check with local codes for special dis-

posal instructions.

SAVE THESE INSTRUCTIONS

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital terminal

equipment without encoded analog content and billing protection is used to transmit digi-

tal signals containing encoded analog content which are intended for eventual conversion

into voice band analog signal and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is

being transmitted or that the output of the device meets Part 68 encoded analog content or

billing protection specification.

• End use/customer will be responsible to file an affidavit with the local exchange carrier

when connecting unprotected CPE to a 1.544 Mbps or subrate digital service.

• Until such time as subrate digital terminal equipment is registered for voice applications,

the affidavit requirements for subrate services are waived.

Affidavit for Connection of Customer Premises Equipment to 1.544 MBPS and/or

Subrate Digital Services

For the work to be performed in the certified territory of ______________ (telco name)

State of ________________________________

County of ______________________________

I, _______________________ (name), ____________________ (business address),

_____________________ (telephone number) being duly sworn, state:

I have the responsibility for the operation and maintenance of the terminal equipment to be

connected to 1.544 Mbps and/or __________________ subrate digital services. The terminal

equipment to be connected complies with Part 68 of the FCC rules except for the encoded ana-

log content and billing protection specification. With respect to encoded analog content and

billing protection:

( ) I attest that all operations associated with the establishment, maintenance and adjustment of

the digital CPE with respect to encoded analog content and billing protection information contin-

uously complies with Part 68 of the FCC rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or bill-

ing information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control

of the customer.

I attest that the operator(s) maintainer(s) of the digital CPE responsible for the establishment,

maintenance and adjustment of the encoded analog content and billing information has (have)

been trained to perform these functions by successfully having completed one of the following

(check appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode

analog signals; or

( ) B. A training course provided by the customer or authorized representative, using training

materials and instructions provided by the manufacturer/grantee of the equipment used to

encode analog signals; or

YLL

( ) C. An independent training course (e.g., trade school or technical institution) recognized by

the manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the proceeding training requirements, the operator(s)/maintainer(S) is (are)

under the control of a supervisor trained in accordance with _______________ (circle one)

above.

I agree to provide ____________________ (telco’s name) with proper documentation to dem-

onstrate compliance with the information in the preceding paragraph, if so requested.

_____________________ Signature

_____________________ Title

_____________________ Date

Subscribed and sworn to before me

This _________ day of ___________________, 20__

_______________________________________

Notary Public

My commission expires: _________________________

YLLL

FCC regulations require that the following information be provided in this manual:

1. This equipment complies with Part 68 of the FCC rules. There is a label on the equipment

that shows the FCC registration number and Ringer Equivalence Number (REN) for this

equipment, if applicable. If required, this information must be given to the telephone com-

pany.

2. The following information may be required when applying to the local telephone com-

pany for leased line facilities.

3. An FCC compliant telephone cord with a modular plug may be provided with this equip-

ment. This equipment is designed to be connected to the telephone network or premises

wiring using a compatible modular jack, which is FCC Part 68 compliant. See installation

instructions for details.

4. If this equipment causes harm to the telephone network, the telephone company may tem-

porarily discontinue service. If possible, advance notification is given; otherwise, notifica-

tion is given as soon as possible. The telephone company will advise the customer of the

right to file a complaint with the FCC.

5. The telephone company may make changes in its facilities, equipment, operations, or pro-

cedures that could affect the proper operation of this equipment. If this happens, the tele-

phone company will provide advance notification and the opportunity to make the

necessary modifications to maintain uninterrupted service.

Service

Type

Digital Facility

Interface Code

Service Order

Code

Network

Jacks

2.4 kbps Digital Interface

4.8 kbps Digital Interface

9.6 kbps Digital Interface

19.2 kbps Digital Interface

38.4 kbps Digital Interface

56 kbps Digital Interface

64 kbps Digital Interface

04DU5-24

04DU5-48

04DU5-96

04DU5-19

04DU5-38

04DU5-56

04DU5-64

6.0F

RJ-48S

Basic Rate ISDN 02IS5 6.0N RJ-49C

1.544 Mbps-SF

1.544 Mbps-SF and B8ZS

1.544 Mbps-ESF

1.544 Mbps-ESF and B8ZS

04DU9-BN

04DU9-DN

04DU9-1KN

04DU9-1SN

6.0F

RJ-48C

6. If experiencing difficulty with this equipment, please contact ADTRAN for repair and

warranty information. If the equipment is causing harm to the network, the telephone

company may request this equipment to be disconnected from the network until the prob-

lem is resolved or it is certain that the equipment is not malfunctioning.

7. This unit contains no user serviceable parts.

8. The FCC recommends that the AC outlet to which equipment requiring AC power is to be

installed is provided with an AC surge arrester.

[

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial envi-

ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference

to radio frequencies. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own

expense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Change or modifications to this unit not expressly approved by the party re-

sponsible for compliance could void the user’s authority to operate the equip-

ment.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ADTRAN Hardware di rete

ADTRAN

ADTRAN GPON 452 Manuale utente

ADTRAN

ADTRAN Total Reach TRDDB Manuale di istruzioni

ADTRAN

ADTRAN DS3 NIU3 PM Manuale di istruzioni

ADTRAN

ADTRAN Total Access 5006 Manuale utente

ADTRAN

ADTRAN DDS-DP Manuale del prodotto

ADTRAN

ADTRAN Total Access 300 Series Manuale utente

ADTRAN

ADTRAN NetVanta 7000 Series Manuale utente

ADTRAN

ADTRAN GPON 452 Manuale utente

ADTRAN

ADTRAN Total Access SHDSL LTU Manuale di istruzioni

ADTRAN

ADTRAN ACT 1900 Manuale utente

ADTRAN

ADTRAN 602 Manuale utente

ADTRAN

ADTRAN jobAid 1442351G1 Manuale utente

ADTRAN

ADTRAN Total Access 1500 Total Reach DDS-DP Manuale del prodotto

ADTRAN

ADTRAN NetVanta 873 Manuale utente

ADTRAN

ADTRAN DSU IV ESP Manuale utente

ADTRAN

ADTRAN Total Access 604 Guida utente

ADTRAN

ADTRAN 1700900F2 Manuale utente

ADTRAN

ADTRAN DDM+ HTU-C M Manuale utente

ADTRAN

ADTRAN IQ 710 Guida utente

ADTRAN

ADTRAN DS3 NIU3 Manuale utente

ADTRAN

ADTRAN Total Reach DDS-DP 5 Series Manuale di istruzioni

ADTRAN

ADTRAN NetVanta 838 Manuale utente

ADTRAN

ADTRAN DSU 5600 Manuale utente

ADTRAN

ADTRAN NetVanta 8044M Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente