Advantech PCIE-1756H Manuale utente

User Manual

PCIE-1756H

64-ch Isolated Digital I/O with

Digital Filter PCI Express Card

PCIE-1756H User Manual ii

The documentation and the software included with this product are copyrighted 2017

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2001175610 Edition 1

Printed in Taiwan April 2017

iii PCIE-1756H User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are included and in

good condition. If any item does not accord with the table, please contact your dealer

immediately.

PCIE-1756H DAQ Card

StartUp or User Manual

Companion DVD-ROM with DAQNavi drivers included

PCIE-1756H User Manual iv

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any internal components, the CPU, or any

adapter cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

v PCIE-1756H User Manual

Contents

Chapter 1 Introduction..........................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 4

Figure 1.1 Installation Flow Chart................................................ 4

1.5 Software Overview .................................................................................... 5

1.6 DAQNavi Device Driver Programming Roadmap ..................................... 6

1.6.1 Programming Tools....................................................................... 6

1.6.2 Programming with DAQNavi Device Drivers Function Library...... 6

1.6.3 Troubleshooting DAQNavi Device Drivers Error........................... 6

1.7 Accessories............................................................................................... 7

Chapter 2 Installation............................................9

2.1 Unpacking ............................................................................................... 10

2.2 Driver Installation .................................................................................... 10

2.3 Hardware Installation .............................................................................. 11

Chapter 3 Signal Connections...........................13

3.1 Overview ................................................................................................. 14

3.2 Switch and Jumper Settings.................................................................... 14

Figure 3.1 Connector and Switch Locations.............................. 14

3.2.1 Board ID (SW1)........................................................................... 15

Table 3.1: Board ID Setting (SW1) ............................................ 15

3.2.2 Power On Configuration(JP1) ..................................................... 16

Table 3.2: Power on configuration after hot reset (JP1) ............ 16

3.2.3 Channel-Freeze Function (JP2).................................................. 16

Table 3.3: Dry/Wet Contact of Channel-Freeze Function (JP2) 16

3.3 Signal Connections ................................................................................. 17

Figure 3.2 I/O Connector Pin Assignments ............................... 17

3.3.1 I/O Connector Pin Definition ....................................................... 18

Table 3.4: I/O Connector Signal Descriptions ........................... 18

3.3.2 Isolated Digital Input ................................................................... 18

Figure 3.3 Isolated Digital Input Connection.............................. 18

3.3.3 Isolated Digital Output................................................................. 19

Figure 3.4 Isolated Digital Output Connection ........................... 19

3.3.4 Channel-Freeze Function ........................................................... 19

Figure 3.5 Wiring in wet contact input mode.............................. 19

Figure 3.6 Wiring in dry contact input mode .............................. 20

3.4 Field Wiring Considerations .................................................................... 20

Appendix A Specifications ....................................21

A.1 Isolated Digital Input................................................................................ 22

A.2 Digital Filter Time .................................................................................... 22

A.3 Isolated Digital Output............................................................................. 22

A.4 General ................................................................................................... 23

Appendix B Block Diagrams .................................25

PCIE-1756H User Manual vi

B.1 Block Diagrams....................................................................................... 26

Appendix C ADAM-3951 Pin Assignment............27

C.1 ADAM-3951 Pin Assignment .................................................................. 28

Figure C.1 Connect to PCL-10250 CON1.................................. 28

Figure C.2 Connect to PCL-10250 CON2.................................. 29

Chapter 1

1Introduction

This chapter introduces the PCIE-

1756H cards and their typical

applications.

Sections include:

Features

Applications

Installation Guide

Software Overview

Device Driver Roadmap

Accessories

PCIE-1756H User Manual 2

1.1 Introduction

Thank you for buying the Advantech PCIE-1756H, which is a 32/32-ch isolated digital

input/output card. It is an advanced-performance data acquisition card based on PCI

Express bus architecture. It features a unique circuit design and complete functions

for data acquisition and control. The following sections of this chapter will provide fur-

ther information about features of PCIE-1756H, a Quick Start for installation, together

with some brief information on software and accessories.

1.2 Features

32-ch isolated DI/O (16-ch digital input w/ Digital filter, 16-ch digital output)

Wide input range (10 ~ 30 VDC)

Either +/- voltage input for IDI by group

Wide output range (5 ~ 40 VDC)

High sink current on isolated output channels (500 mA max./ch)

High over-voltage protection (70 VDC)

High-voltage isolation (2,500 VDC)

2,000 VDC ESD protection

Output status read-out

Keeps output settings and values after system hot reset

Interrupt handling capability for IDI channels

Channel-freeze function

Board ID

PCIE-1756H provides the following benefits:

Robust Protection

The PCIE-1756H features a robust isolation protection for applications in industry, lab

and machine automation. The PCIE-1756H can durably withstand a voltage up to

2,500 VDC, preventing your host system from harm.

Wide Input Range

The PCIE-1756H accepts a wide range of input voltage, from 10 to 30 VDC, and it is

suitable for most industrial applications with 12 VDC and 24 VDC input voltage. We

are also ready to serve your special needs for specific input voltage ranges. Do not

hesitate to ask us about tailoring our standard products to meet your specifications.

Wide Output Range

The PCIE-1756H also features a wide output voltage range from 5 to 40 VDC, suit-

able for most industrial applications with 12 VDC/24 VDC output voltage. Similarly to

the input voltage offer above, we are ready to serve your special needs for specific

output voltage range. Do not hesitate to ask us about tailoring our standard products

to meet your specifications.

3 PCIE-1756H User Manual

Chapter 1 Introduction

Board ID Setting

The PCIE-1756H has a built-in DIP switch that defines each card’s ID when multiple

cards have been installed in the same PC chassis. The board ID setting function is

very useful when users build systems with multiple PCIE-1756H cards. With correct

Board ID settings, you can easily identify and access each card during hardware con-

figuration and software programming.

Channel-Freeze Function

The PCIE-1756H provides Channel-Freeze function, which can be enabled either in

dry contact or wet contact mode (selectable by the on-board jumper). When the

Channel-Freeze function is enabled, the last status of each digital output channel will

be safely kept for emergency use. Moreover, you can enable this function through

software as it is useful in software simulation and testing programs.

Reset Protection

When the system has undergone a hot reset (i.e., without turning off the system

power), the PCIE-1756H can either retain output values of each channel, or return to

its default configuration as open status, depending on its on-board jumper setting.

This function protects the system from wrong operations during unexpected system

resets.

All these merits make PCIE-1756H an excellent choice for industrial applications.

1.3 Applications

Industrial ON/OFF control

Switch status sensing

BCD interfacing

Digital I/O control

Industrial and lab automation

Note! For detailed specifications of the PCIE-1756H, please refer to Appendix

PCIE-1756H User Manual 4

1.4 Installation Guide

Before you install your PCIE-1756H card, please make sure you have the following

necessary components:

PCIE-1756H DAQ Card

PCIE-1756H Startup or User Manual

Driver Software Advantech DAQNavi software (included in DVDROM)

Wiring Cable PCL-10250 or PCL-101100M (optional)

Wiring Board ADAM-3951 or ADAM-39100 (optional)

Computer Personal computer or workstation with a PCI Express-bus slot

Other optional components are also available for enhanced operation:

Advantech DAQ tools, LabView or other 3rd-party software

After you get the necessary components and maybe some accessories for enhanced

operation for your DA&C card, you can begin the Installation procedures. Figure 1.1

provides a concise flow chart to give users a broad picture of the software and hard-

ware installation procedures:

Figure 1.1 Installation Flow Chart

Indice

Altri manuali Advantech Sistema I/O

Advantech

Advantech USB-4702 Manuale utente

Advantech

Advantech APAX-5013 Manuale utente

Advantech

Advantech APAX-5000 Series Manuale utente

Advantech

Advantech PCL-720 Manuale utente

Advantech

Advantech ADAM-6000 series Manuale utente

Advantech

Advantech ADAM-6156PN Manuale utente

Advantech

Advantech PCL-722 Manuale utente

Advantech

Advantech 48/24-Channel Digital Input/Output USB Module... Manuale utente

Advantech

Advantech WISE-4610 Series Manuale utente

Advantech

Advantech I/O Module 5000 Series Manuale utente

Advantech

Advantech AIIS-E730 Manuale di installazione e funzionamento

Advantech

Advantech MIC-75G20 Manuale di installazione e funzionamento

Advantech

Advantech ADAM-6100PN Series Manuale utente

Advantech

Advantech PCL-813 Manuale utente

Advantech

Advantech PCI-1750SO Manuale utente

Advantech

Advantech PCI-1713 Manuale utente

Advantech

Advantech USB-582 Manuale di installazione e funzionamento

Advantech

Advantech ADAM-6251 Manuale di installazione e funzionamento

Advantech

Advantech B+B SmartWorx Zlinx ZZ24D-NA-SR Manuale utente

Advantech

Advantech PCI-1750 Manuale utente

Advantech

Advantech ADAM-6300 Series Manuale utente

Advantech

Advantech PCIE-1762H Manuale utente

Advantech

Advantech AMAX-5000 Series Manuale utente

Advantech

Advantech AMAX-5000 Series Manuale utente

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente

WAGO

WAGO I/O-SYSTEM 750 Manuale utente