Advantech USB-5817 Manuale di installazione e funzionamento

USB-5817 Startup Manual 1

Before installation, please ensure that the following items

are included with the product:

1. 1 x USB-5817 module

2. 4 x Terminal blocks

3. 1 x Startup manual

4. 1 x USB 3.0 lockable cable (1 m)

If any of the above items are missing or damaged, contact

your distributor or sales representative immediately.

For more detailed information regarding this product, please

download the USB-5817 user manual from the Advantech

website.

Advantech’s USB-5817 is an industrial USB 3.0 isolated

analog input module. To ensure easy installation in cabinet

computers, USB-5817 modules are compact and equipped

with a DIN rail mount kit. The built-in USB hub can support

a daisy-chain topology, while Euro-type pluggable terminal

blocks and LED indicators facilitate conguration and

maintenance.

USB-5817

8-Channel,16-Bit, 200 kS/s USB 3.0 Isolated

Analog Input Module

Startup Manual

General

• Connectors:

- 2 x 10-pin terminal block (3.81 mm, AI)

- 2 x 3-pin screw terminal block (3.81 mm, power)

- USB 3.0 type A (downstream port)

- USB 3.0 type B (upstream port)

• Dimensions:

120 x 120 x 40 mm3(4.72 x 4.72 x 1.57 in3)

• OperatingTemperature: 0 ~ 60 °C (32 ~ 140 °F)

• StorageTemperature:-40 ~ 70 °C (-40 ~ 158 °F)

• StorageHumidity:5 ~ 95% RH (non-condensing)

• PowerSupply:10 ~ 30 VDC

• Interface: USB 3.0

• DataTransferRates: 5 Gbps

• PowerConsumption:

- Using USB bus power: 350 mA typical @ 5 V

- Using external power: 100 mA typical @ 24 V

• ESDProtection

- Air: ±8 kV

- Contact: ±6 kV

• DCSurgeProtection: 2 kV

AnalogInput

• NumberofInputChannels:8 differential, can be en-

abled/disabled independently using software

• A/DConverter(ADC)Resolution:16 bits (15 bits for

current measurement)

• A/DConverter(ADC)Type:Successive approximation

(SAR)

• MaximumSampleRates(fs):200 kS/s shared by all

channels

• InputCoupling:DC

• InputRange:±10 V, 0 ~ 20 mA

• InputCommon-ModeVoltageRange:±275 V

• AbsoluteAccuracy

-OffsetError:< ±1 mV

- GainError:< ±0.01% of full-scale range

• TemperatureDrift

-OffsetDrift:25 ppm/°C

- GainDrift:15 ppm/°C

• Bandwidth(-3dB):10 kHz

• IdleChannelNoise:0.27 mVRMS (16 bits effective resolu-

tion)

• Signal-to-NoiseRatio(SNR):87 dB

• TotalHarmonicDistortion(THD):-98 dB

• TotalHarmonicDistortionPlusNoise(THD+N):-87 dB

• Spurious-FreeDynamicRange(SFDR):102 dB

• EffectiveNumberofBits(ENOB):14.2 bits

PackingList

For more information about this or other Advantech

products, please visit our website at

http://www.advantech.com

For driver/SDK downloads and technical support

services, please visit our support website at

http://support.advantech.com

This manual is for USB-5817.

Part No. 2041581700

Printed in China

Edition 1

January 2019

Specications

Overview

UserManual

2 USB-5817 Startup Manual

USB-5817 modules have a built-in DIP switch that is used

to dene the board ID for each module. When multiple

modules are installed in the same system, the board

ID switch can be used to identify each module’s device

number. Every module in the system should be assigned

different device numbers. The default board ID value is 0.

When conguring the board ID to any other value, refer to

the settings in the following table:

Switches

SW2~SW8 are used to congure the analog input as volt-

age measurement (±10 V) or current measurement (0 ~ 20

mA). The default setting is voltage measurement.

• InputImpedance

- Differential:800 kΩ

- CommonMode:200 kΩ

• InputFIFOSize:4,096 samples shared among all

enabled channels

1. Install the SDK and drivers downloaded from the

Advantech website.

2. Touch the metal case of the computer to discharge any

static electricity that may be in your body.

3. Insert the USB module into the designated USB port.

Use caution when inserting the module to avoid damag-

ing the components from excessive force.

FCCClassA

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15

of the FCC rules. These limits are designed to provide rea-

sonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequen-

cy energy and, if not installed and operated in accordance

with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in

a residential area is likely to cause interference. In such

cases, users are required to correct the interference at their

own expense.

This product has passed the CE test for environmental

specications when shielded cables are used for external

wiring. We recommend the use of shielded cables. Such

cables are available from Advantech. Please contact your

local supplier for ordering information.

USB-5817 modules feature two power input terminals with

an input power range of 10 ~ 30 VDC and power redun-

dancy support. For modules connected to two power input

sources, if one source is inactive or interrupted, the other

power source can immediately assume supply operations.

Accordingly, USB-5817 modules can operate with a single

power source. (The modules can also be powered via USB

if there is no device connected to the downstream port.)

BoardIDSwitch

DeclarationofConformity

Specications(Cont.)

Power

InstallationInstructions

USB-5817 Startup Manual 3

LEDIndicators



Power

State Description

Off Module is not powered on

Green Module is powered on using either USB

bus power or external power

Up/Error

State Description

Green Upstream port is connected. Module is

functioning normally

Red Upstream port is not connected/discon-

nected. Module function is halted

Down

State Description

Off Downstream port is not connected

Blue Downstream port is connected

Layout/Dimensions



Altri manuali Advantech Sistema I/O

Advantech

Advantech PCIE-1756H Manuale utente

Advantech

Advantech PCM-3724 Manuale di installazione e funzionamento

Advantech

Advantech WISE-2200-M Manuale di installazione e funzionamento

Advantech

Advantech ECU-P1702 Manuale di installazione e funzionamento

Advantech

Advantech PCI-1730 Manuale utente

Advantech

Advantech AIIS-E730 Manuale di installazione e funzionamento

Advantech

Advantech MIC-75G20 Manuale di installazione e funzionamento

Advantech

Advantech PCIE-1730 Series Manuale utente

Advantech

Advantech ADAM-5000/TCP Series Manuale utente

Advantech

Advantech USB-5820 Manuale utente

Advantech

Advantech PCI-1713 Manuale utente

Advantech

Advantech APAX-5000 Series Manuale utente

Advantech

Advantech ADAM-6251 Manuale di installazione e funzionamento

Advantech

Advantech MIOe-220 Manuale di installazione e funzionamento

Advantech

Advantech PCL-722 Manuale utente

Advantech

Advantech ADAM-6300 Series Manuale utente

Advantech

Advantech AMAX-5000 Series Manuale utente

Advantech

Advantech UNO-2000-LKAE Manuale utente

Advantech

Advantech ADAM-6000 series Manuale utente

Advantech

Advantech WISE-5000 Series Manuale utente

Advantech

Advantech WISE-4210 Series Manuale di installazione e funzionamento

Advantech

Advantech PCI-1750SO Manuale utente

Advantech

Advantech PCM-3730 Manuale utente

Advantech

Advantech AMAX-5000 Series Manuale utente

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente

WAGO

WAGO I/O-SYSTEM 750 Manuale utente