Advantech BB-USO9ML2-A Manuale utente

www.advantech.com

707 Dayton Road | PO Box 1040 | Ottawa, IL 61350

Phone: (815) 433-5100 | Fax: (815) 433-5109

www.advantech.com | E-mail: support@advantech-bb.com

Fast and easy on the web:

www.advantech.com

QUICK START

GUIDE

Documentation Number:

20BB-710-11822-00_r2_USO9ML2-A_USO9ML2-LS-A_2219qsg

Recommended Accessories

Before you begin, be

sure you have the following:

Models BB-USO9ML2-A, BB-USO9ML2-LS-A

Isolated USB to RS-232 Converter

+ USB/RS-232 Converter

+ USB Cable, 0.9m (3ft), included

Serial Cable, 1.8m (6 ft)

DB9 male - DB9 female

Model# BB-9PAMF6

USB Cable, 1.8m (6 ft)

Type A male - Type B male

Model# BB-USBAMBM-6F

The converter is available in two formats: “Standard” and

“Locked Serial Number.” The version you select depends

on your application.

Standard converter Model BB-USO9ML2-A has a unique

serial number. Drivers must be installed for the converter

and a unique COM port will be assigned.

Typical applications: xed location.

All Locked Serial Number Models BB-USO9ML2-LS-A

share the same serial number and will install using the

same COM port. The driver only needs to be installed

once; subsequent BB-USO9ML2-LS-A converters install

using the same COM port.

Typical applications: eld service.

Converter Formats

Standard vs Locked Serial Number

RS-232 Line Tester

Model# BB-9PMTT

DB9 Pinout

Install the Drivers Check LEDs

Connect The Converter

2 4

Product Overview

RS-232 Port

LEDs

USB Port

Connect the converter’s USB port to a USB port on your

computer or USB hub.

Most of the time, a DB9 male will be a DTE.

A DB9 female will usually be a DCE.

A DTE device is “Data Terminal Equipment.”

This includes computers, PLCs, and most devices that are

not used to extend communications.

Think COMPUTER for DTE.

A DCE device is “Data Communications Equipment.”

This includes modems and other devices that extend

communications like RS-422/485, ber optic converters or

radio modems.

Think “MODEM” for DCE.

If both devices have a DB9 male connection, you will need

a crossover cable. If both devices have a DB9 female

connection, you will need a crossover cable.

When one device is male and one device is female, use a

straight-through cable.

When everything is installed and connected, the LED will

blink to let you know that data trafc is passing through

the converter.

Loopback pins 2 and 3.

Using Hyper Terminal or a similar program, connect to the

COM port.

Set the desired baud rate.

Ensure that Hyper Terminal local echo is OFF.

Transmit data. If the same data is returned, the test is

successful.

Loopback Test

When plugged in, Windows will nd and install the FTDI

Virtual COM (VCP) driver software. Be sure Windows

Updates is enabled.

When installation is complete, the USB converter will

appear in Windows Device Manager as an additional

COM port.

If the computer you are installing this product on cannot

access the internet, a driver package is available for

download from the Advantech B+B website.

Are My Devices Wired As DTE or DCE?

How to Check

1. Use Rule of Thumb

If the device plugs into the computer serial port and works

normally, the device is wired as DCE (or the connection

cable is a crossover type that makes it work as a DCE).

If the device connects to the computer port using a “null

modem” crossover cable, it is wired as DTE.

2. Use an RS-232 Line Tester

A quick and easy way to determine the DTE/DCE port

type is to use a RS-232 line tester such as Advantech

B+B Model# BB-9PMTT. The tester can show the signal

state of any active RS-232 data lines using LEDs. Active

data lines are output from a device. They may be either

High or Low.

Troubleshooting

Questo manuale è adatto per i seguenti modelli

Altri manuali Advantech Convertitore multimediale

Advantech

Advantech B+B SmartWorx 422CFCR Manuale utente

Advantech

Advantech B+B SmartWorx IE-ModeConverter Manuale utente

Advantech

Advantech VEGA-2002 Manuale utente

Advantech

Advantech B+B SMARTWORX 485LDRC9 Manuale utente

Advantech

Advantech BB-422PP9TB Manuale utente

Advantech

Advantech ADAM-4561 Manuale utente

Advantech

Advantech EKI-2541M/SC Manuale utente

Advantech

Advantech B+B SmartWorx 485USB9F-2W Manuale utente

Advantech

Advantech B+B SmartWorx Giga-MiniMc TX-SX Manuale utente

Advantech

Advantech PCL-833 Manuale utente

Advantech

Advantech VEGA-2001 Manuale di istruzioni

Advantech

Advantech SSPBMg-C200-BRE Manuale utente

Advantech

Advantech EKI-2741SX-AE Manuale utente

Advantech

Advantech B+B SmartWorx Giga-MiniMc 856-10730-TX Manuale utente

Advantech

Advantech IMC-574I-SFP Manuale utente

Advantech

Advantech EKI-2741SX Manuale utente

Advantech

Advantech SSPBM-K125-BTE Manuale utente

Advantech

Advantech B+B SmartWorx MiniMc TP-TX/FX Manuale utente

Advantech

Advantech IE-Giga-MiniMc Manuale utente

Advantech

Advantech EKI-2741F Manuale utente

Advantech

Advantech BB-485DRCI-PH Manuale utente

Advantech

Advantech B+B SmartWorx USOPTL4-2P Manuale utente

Advantech

Advantech PCIE-1884 Manuale utente

Advantech

Advantech ADAM-6541 Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente