Advantech PCL-730 Manuale utente

User Manual

PCL-730

32-ch Isolated Digital I/O

ISA Cards

PCL-730 User Manual ii

The documentation and the software included with this product are copyrighted 2008

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part Number: 2003730001 Edition 1

Printed in Taiwan March 2012

iii PCL-730 User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

PCL-730 User Manual iv

Warnings, Cautions and Notes

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

v PCL-730 User Manual

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

Safety Precaution - Static Electricity

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained

herein.Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

PCL-730 User Manual vi

vii PCL-730 User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 2

1.4 Specifications ............................................................................................ 3

1.5 Daughterboards ........................................................................................ 4

Chapter 2 Hardware Installation ..........................5

2.1 Installation ................................................................................................. 6

2.2 Initial Inspection ........................................................................................ 6

2.3 Switch and Jumper Settings...................................................................... 7

Table 2.1: Connectors, Jumpers, and Switches .......................... 7

2.4 Base Address selection (SW1) ................................................................. 8

2.4.1 Interrupt level (JP1)....................................................................... 8

2.4.2 Interrupt triggering (JP2) ............................................................... 9

2.4.3 Interrupt source (JP3) ................................................................... 9

2.4.4 Version control (JP4/JP5) ............................................................. 9

2.5 Hardware Installation ............................................................................. 10

Chapter 3 Signal Connections ...........................11

3.1 Overview ................................................................................................. 12

3.2 Connector Pin Assignments.................................................................... 12

3.3 TTL-level I/O ........................................................................................... 14

3.3.1 Isolated Input .............................................................................. 14

3.3.2 Isolated Output............................................................................ 15

Appendix A Register Format .................................17

A.1 Register Format ...................................................................................... 18

Table A.1: Register Assignment ................................................ 18

Appendix B PC I/O Port Address Map ..................19

B.1 PC I/O port address map ........................................................................ 20

PCL-730 User Manual viii

Chapter 1

1Overview

PCL-730 User Manual 2

1.1 Introduction

The PCL-730 offers 32 isolated digital I/O channels (16 DI and 16 DO) and 32 TTL

digital I/O channels (16 DI and 16 DO) on a PC add-on card. Providing 2500 VDC iso-

lation, each I/O channel corresponds to a bit in a PC I/O port, making the PCL-730

very easy to program. The PCL-730 offers one PC interrupt with jumper-selectable

IRQ.

1.2 Features

32 isolated DIO channels (16 inputs and 16 outputs)

32 TTL-level DIO channels (16 inputs and 16 outputs)

High output driving capacity

High-voltage isolation on isolated I/O channels (2500 VDC)

Interrupt capacity

Two separate 20-pin connectors for isolated input channels and output channels

D-type connectors for isolated input channels and output channels

High sink current on isolated output channels (200 mA/channel)

1.3 Applications

Industrial ON/OFF control

Contact closure monitoring

Switch status sensing

BCD interfacing

Digital I/O control

Industrial and lab automation

Altri manuali per PCL-730

Indice

Altri manuali Advantech Scheda madre

Advantech

Advantech SOM-7567 Manuale utente

Advantech

Advantech AIMB-223 Manuale di installazione e funzionamento

Advantech

Advantech PCE-7214 Manuale utente

Advantech

Advantech AIMB-227 AMD Manuale utente

Advantech

Advantech AIMB-762 Manuale di installazione e funzionamento

Advantech

Advantech PCE-7131 Manuale utente

Advantech

Advantech SOM-DB4700 Manuale utente

Advantech

Advantech EAX-R680RP Manuale utente

Advantech

Advantech PCA-6029 Manuale di installazione e funzionamento

Advantech

Advantech MIC-3385 Manuale utente

Advantech

Advantech AIMB-707 Manuale di installazione e funzionamento

Advantech

Advantech AIMB-586 Manuale utente

Advantech

Advantech AIMB-216 Manuale utente

Advantech

Advantech SOM-5787 Manuale utente

Advantech

Advantech AIMB-562 KIOSK Manuale utente

Advantech

Advantech PCM-9579 Manuale di installazione e funzionamento

Advantech

Advantech ROM-7420 Manuale utente

Advantech

Advantech INTEL PCM-9587 Manuale utente

Advantech

Advantech SOM-AB5810 Manuale utente

Advantech

Advantech PCM-9362 Series Manuale utente

Advantech

Advantech AIMB-740-6CB1 Manuale utente

Advantech

Advantech AIMB-225 Manuale utente

Advantech

Advantech SOM-ETX Series Guida

Advantech

Advantech AIMB-270 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente