6
User Settings and Controls
The Main Menu is accessed from Live Image mode by pressing the Menu soft key.
• While in the Main Menu, press Up/Down arrow keys to navigate and select
(highlight) the desired menu option.
–Settings: Congure Auto Focus, Pass/Fail, Bluetooth, etc.
–Results Manager: Navigate and Review or Send saved test results
–Last Image: Recall most recently viewed image
–WiFi: Congure WiFi for remote access (future)
–Device Info: View serial number, software rev, etc.
• Press Select or Right arrow key to display the selected option sub-screen.
• While in a sub-screen, press Up/Down arrow keys to navigate and highlight
the desired option.
–Press Select soft key or Right arrow key to edit highlighted parameter
–When selected parameter displays On/Off icon / , press Select to
enable/disable
• Press Back soft key to return to the previous menu screen.
Capture Key Operation
• In the Live Image mode, press the Capture key to perform the following:
–Auto Focus image (if the Auto Focus option is enabled)
–Capture the displayed image and enter the Captured Image mode
–Analyze image (if the Pass/Fail option is enabled)
–Save results and send image to Bluetooth-paired device (if auto-save and
auto-send enabled on “1st Capture Key”, see page 12 for details)
–If auto-save or auto-send enabled on “2nd Capture Key” (see page 12),
press the Capture key again to save and/or send
• In Captured Image mode, press the Capture key to return to Live Image mode.
• In the Main Menu or Settings modes, press the Capture key to return to the most
recent Live or Captured Image mode.
