Agilent Technologies IDP3GBKIT Manuale utente

Indice

Altri manuali Agilent Technologies Attrezzature da laboratorio

Agilent Technologies

Agilent Technologies 1290 infinity Manuale utente

Agilent Technologies

Agilent Technologies 490 Micro GC Manuale utente

Agilent Technologies

Agilent Technologies 4107 Manuale utente

Agilent Technologies

Agilent Technologies 709-DS Manuale utente

Agilent Technologies

Agilent Technologies G1960-60470 Manuale utente

Agilent Technologies

Agilent Technologies Magnis NGS Prep System Manuale utente

Agilent Technologies

Agilent Technologies 1100 Series Manuale utente

Agilent Technologies

Agilent Technologies 6850 Series Istruzioni per l'uso e l'installazione

Agilent Technologies

Agilent Technologies G2747A Manuale utente

Agilent Technologies

Agilent Technologies 5100 ICP-OES Manuale utente

Agilent Technologies

Agilent Technologies MX3000P Guida di sicurezza

Agilent Technologies

Agilent Technologies 6490 Manuale

Agilent Technologies

Agilent Technologies PlateLoc Manuale utente

Agilent Technologies

Agilent Technologies BioCel 1200 Manuale utente

Agilent Technologies

Agilent Technologies 8890 Manuale utente

Agilent Technologies

Agilent Technologies 5517B Manuale utente

Agilent Technologies

Agilent Technologies PlateLoc Manuale utente

Agilent Technologies

Agilent Technologies 55 AA Manuale utente

Agilent Technologies

Agilent Technologies G1701DA Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity Manuale utente

Agilent Technologies

Agilent Technologies 5DX Manuale utente

Agilent Technologies

Agilent Technologies 6820 Manuale utente

Agilent Technologies

Agilent Technologies 1260 Infinity Manuale utente

Agilent Technologies

Agilent Technologies G1978B Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente

Yamato

Yamato BM510 Manuale utente

Quick Reference Guide

TPS-compact Gas Ballast

The TPS-compact packaging includes a standard gas ballast kit (P/N IDP3GBKIT) that can be used to prevent water and

other condensates from accumulating within the foreline pump. The standard configuration has a seal screw installed in the

1/4-20 thread in the top of the exhaust manifold. This configuration can be used for dry applications.

When appreciable amounts of water, solvents, etc., are being pumped, remove the seal screw and replace it with the provided

adapter and 1/8" NPT sintered filter plug.

WARNING

Before install gas ballast adapter remove the power supply cable.

1. Disconnect the TPS-compact from electrical power.

2. Unlock the scroll pump support by unscrewing the screws.

3. Lift the TPS-compact in order to access the Scroll pump site.

Quick Reference Guide

4. Unscrew seal screw and install provided gas ballast adapter and 1/8’’ NPT.

5. Lock the scroll pump support by screwing the screws.

Be careful during pump support closing to prevent damage to system components (vacuum pipes and

connectors).

NOTE

1. During the operation of the gas ballast feature the noise may increase.

2. There is not a predefined amount of time to let the gas ballast open: it depends on the amount of

moisture trapped in the system.

Do not exceed 2.8 Nm of torque when installing the adapter into the manifold.

For more details about gas ballast refer to the manuals of the single TPS-compact components.

Use the provided adapter and 1/8" NPT sintered filter plug in order to avoid dust entrance.

The gas ballast must be sealed whenever pumping any gas not intended to be vented to

atmosphere.

Contacts:

U.S. and Canada (toll free):

+1 800 882 7426

vpl-[email protected]

Europe & other countries (toll free):

+00 800 234 234 00

vpt-[email protected]

China (toll free):

400 8206778 (mobile)

800 8206778 (landline)

vpd-support-[email protected]

Visit the product web page: www.agilent.com/chem/tpscompact

This information is subject to change without notice.

© Agilent Technologies, Inc. 2022

Printed in Italy, January 14th, 2022

X3582-90000-9-PUI rev. A.00

CAUTION

CAUTION

CAUTION

CAUTION