Agilent Technologies E5072A Manuale utente

Agilent

E5072A ENA Series Network Analyzer

30 kHz to 4.5/8.5 GHz

Configuration Guide

Ordering Guide

The following steps will guide you through configuring your E5072A. 1-year return to Agilent service warranty is included

as standard

Standard furnished item

Description Additional information

Installation guide Contains the information necessary to start up with the E5072A.

Power Cable

Calibration of Certiﬁcation

IO LIBRARIES MEDIA SUITE

Option no Description

E5072A-245 2-port, 30 kHz to 4.5 GHz, conﬁgurable test set

E5072A-285 2-port, 30 kHz to 8.5 GHz, conﬁgurable test set

Option no Description

E5072A-008 Frequency offset mode

E5072A-010 Time domain analysis

Option no Description

E5072A-UNQ Standard stability time base

E5072A-1E5 High stability time base

Option no Description

E5072A-017 Removable hard disk drive

E5072A-019 Standard hard disk drive

Step 1. Choose test set option (Mandatory. Select one)

Step 2. Choose software option (Optional. If not required, go to step 3)

Step 3. Choose time base option (Mandatory. Select one)

Step 4. Choose hard disk drive option (Mandatory. Select one)

Option no Description

E5072A-1CM Rack mount kit

E5072A-1CN Front handle kit

E5072A-1CP Rack mount and Front handle kit

E5072A-810 Add keyboard

E5072A-820 Add mouse

Option no Description

E5072A-1A7 ISO 17025 compliant calibration

E5072A-A6J ANSI Z540 compliant calibration

Option no Description

R-50C-011-3 3 year return-to Agilent warranty and service

R-50C-011-5 5 year return-to Agilent warranty and service

Step 5. Choose accessory option (Optional. If not required, go to step 6)

Step 6. Choose calibration option (Optional. If not required, go to step 7)

Step 7. Choose warranty service (Optional)

Test Accessories and Calibration Kits

Test accessories and calibration kits that can be used with the E5072A are listed in this section. A complete line of test

accessories and calibration kits can be found at the Agilent RF and Microwave Test Accessories Web site:

www.agilent.com/find/accessories

Test accessories

Test accessories such as test port cable are necessary for a complete measurement system using the E5072A. Order test

accessories in accordance with the desired measurement system.

Calibration kits

Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in

network measurement. Calibration kit is necessary to perform the calibration.

• Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by the network

analyzer. Choose a calibration kit for each connector type to be used.

• Electronic calibration (ECal) modules replace mechanical calibration standards with one solid-state calibration module

that is controlled by the network analyzer via USB. ECal modules provide many different impedances to the test ports

which enables a full two-port calibration to be performed quickly with a single connection. This technique reduces

operator errors and connector wear and abrasion.

Test accessories

Model No Description

Test port cable

N6314A 50 Ω type-N (m) to type-N (m) cable, DC to 12.4 GHz, 61 cm (24 in)

N6315A 50 Ω type-N (m) to type-N (f) cable, DC to 12.4 GHz, 61 cm (24 in)

11500E 3.5 mm (m) to 3.5 mm (m) cable, 61 cm (24 in)

11500F 3.5 mm (m) to 3.5 mm (m) cable, 152 cm (60 in)

Accessory kit

11853A 50 Ω type-N accessory kit. Includes;

● Type-N (f) to type-N (f) adapter (2 qty.)

● Type-N (m) to type-N (m) adapter (2 qty.)

● Type-N (f) short

● Type-N (m) short

Adapter kit

11878A 50 Ω type-N to 3.5 mm adapter kit. Includes;

● 3.5 mm (m) to type-N (m) adapter

● 3.5 mm (f) to type-N (f) adapter

● 3.5 mm (f) to type-N (m) adapter

● 3.5 mm (m) to type-N (f) adapter

Active probe

85024A 300 kHz to 3 GHz active probe. Includes;

● Probe tip to type-N Adapter

● 10:1 divider

● Hook tip adapter

● Slip-on tip adapter

● Leads

Test accessories (continued)

Model No Description

Power limiters

N9355B Power limiter, 10 dBm limiting threshold, 10 MHz to 18 GHz, Type-N

N9356B Power limiter, 25 dBm limiting threshold, 10 MHz to 18 GHz, Type-N

DC block

N9398C DC block, 16 V maximum working voltage, 50 kHz to 26.5 GHz, 3.5 mm

N9399C DC block, 50 V maximum working voltage, 700 kHz to 26.5 GHz, 3.5 mm

Ampliﬁers

87405B Pre-ampliﬁer, 22 dB gain, 10 MHz to 4 GHz

87415A Pre-ampliﬁer, 25 dB gain, 2 to 8 GHz

Attenuators

8491A Fixed attenuator, DC to 12.4 GHz, Type-N

8493A Fixed attenuator, DC to 12.4 GHz, SMA

Power meter and sensors 1

E4416A 1 Single-channel EPM-P series power meter.

E4417A 1 Dual-channel EPM-P series power meter

E4418B 1 Single-channel EPM series power meter

E4419B 1 Dual-channel EPM series power meter

N1911A 1 Single-channel P-series power meter

N1912A 1 Dual-channel P-series power meter

E9304A-H18 power sensor, 9 kHz to 18 GHz, Type-N (m), 100 mW

E4412A CW power sensor, 10 MHz to 18 GHz, Type-N (m), 200 mW

N1921A power sensor 50 MHz to 18 GHz, Type-N (m)

U2000A/B/H USB power sensor, 10 MHz to 18 GHz, Type-N (m)

U2001A/B/H USB power sensor, 10 MHz to 6 GHz, Type-N (m)

U2004A USB power sensor, 9 kHz to 6 GHz, Type-N (m)

1. Order the 82357B USB/GPIB interface to control a power meter by the E5072A

Calibration kit

Model No Description

Mechanical calibration kits

85032F 50 Ω standard calibration kit, DC to 9 GHz. Includes;

● Type-N (m) ﬁxed load

● Type-N (f) ﬁxed load

● Type-N (m) Open

● Type-N (f) Open

● Type-N (m) Short

● Type-N (f) Short

85032F-100 Adds 50 Ω type-N (f) to type-N (f) adapter

85032F-200 Adds 50 Ω type-N (m) to type-N (m) adapter

85032F-300 Adds 50 Ω type-N (m) to type-N (f) adapter

85032F-500 Adds;

● 50 Ω type-N (m) to 7 mm adapter (2 qty.)

● 50 Ω type-N (f) to 7 mm adapter (2 qty.)

85033E 50 Ω standard calibration kit, DC to 9 GHz. Includes;

● 3.5 mm (m) Load/3.5 mm (m) Open/3.5 mm (m) Short

● 3.5 mm (f) Load/3.5 mm (f) Open/3.5 mm (f) Short

● Torque wrench

85033E-100 50 Ω type-N to 3.5 mm adapter kit. Includes;

● 3.5 mm (m) to type-N (m) adapter

● 3.5 mm (f) to type-N (f) adapter

● 3.5 mm (f) to type-N (m) adapter

● 3.5 mm (m) to type-N (f) adapter

85033E-200 Adds 3.5mm (m) to 3.5 mm (m) adapter

85033E-300 Adds 3.5mm (f) to 3.5 mm (m) adapter

85033E-400 Adds;

● 3.5 mm (m) to Type-N (m) 50-Ohm adapter

● 3.5 mm (f) to Type-N (f) 50-Ohm adapter

● 3.5 mm (f) to Type-N (m) 50-Ohm adapter

● 3.5 mm (m) to Type-N (f) 50-Ohm adapter

85033E-500 Adds;

● 3.5 mm (m) to 7 mm adapter (2 qty.)

● 3.5 mm (f) to 7 mm adapter (2 qty.)

Electronic calibration kits

85092C 1 RF ECal module

2-port (50 Ω type-N), 300 kHz to 9 GHz. The sexes of the connectors depend on

the option.

85092C-M0F Type-N (f) to Type-N (m) RF ECal module

85092C-00M Type-N (m) to Type-N (m) RF ECal module

85092C-00F Type-N (f) to Type-N (f) RF ECal module

85092C-00A Adds;

● Type-N (f) to Type-N (f) adapter

● Type-N (m) to Type-N (m) adapter

85093C 1 RF ECal module

2-port (3.5 mm), 300 kHz to 9 GHz. The sexes of the connectors depend on the

option.

85093C-M0F 3.5 mm (f) to 3.5 mm (m) RF ECal module

85093C-00M 3.5 mm (m) to 3.5 mm (m) RF ECal module

85093C-00F 3.5 mm (f) to 3.5 mm (f) RF ECal module

85093C-00A Adds;

● 3.5 mm (f) to 3.5 mm (f) adapter

● 3.5 mm (m) to 3.5 mm (m) adapter

1. Make sure that the power levels used during calibration do not damage the calibration kit. For Electronic calibration modules,

maximum input power and damage level are listed in the data sheet. (5963-3743E).

E5072A Network Analyzer Conﬁguration and block diagram

E5072A Network Analyzer Upgrades

The following upgrade kits are available for adding the options of the E5072A

E5072A Block Diagram

Port 1 Port 2

RCVR R1 IN

SOURCE OUT

CPLR THRU

SOURCE OUT

RCVR A IN

CPLR ARM

RCVR B IN

CPLR ARM

CPLR THRU

SOURCE OUT

RCVR R2 IN

SOURCE OUT

Source

SPDT Switch

Solid-state

Attenuator

(65 dB)

Mechanical

Step Attenuator

(60 dB,

10 dB step)

Bias-Tee Bias-Tee

Mechanical

Step Attenuator

(60 dB,

10 dB step)

REF 1 REF 2

Figure1. Simpliﬁed test set block diagram

Option no Description

E5072AU-008 Add frequency offset mode (Customer installable)

E5072AU-010 Add time domain analysis (Customer installable)

E5072AU-1E5 Add high stability time base (Return to Agilent)

E5072AU-027 Upgrade to removable HDD 1 (Return to Agilent)

E5072AU-028 Removable hard disk kit. (Spare hard disk,Customer installable)

E5072AU-285 Maximum frequency upgrade from 4.5 GHz to 8.5 GHz for E5072A-245

(Return to Agilent)

1. New hard disk is not included in this option and an original disk is reused. Order E5072AU-028 if spare disk is necessary

Literature Resource

You can find detail information about the key features, application examples, and technical specification of the E5072A in

the following document.

Web Resources

Have access to the following website to acquire the latest news, product and support information, application literature

and more. http://www.agilent.com/find/e5072A

Literature number Description

5990-8001EN E5072A Network Analyzer Conﬁguration Guide

5990-8002EN E5072A Network Analyzer Data Sheet

5990-8003EN E5072A Network Analyzer Quick Fact Sheet

5990-8004EN E5072A Network Analyzer Technical Overview

5990-8005EN High-power Measurement Using the E5072A Network Analyzer Application Note

5989-7603EN Agilent Network Analyzer Selection Guide

5989-0206EN 7 Reasons to Migrate from Your 8753 to an ENA Network Analyzer

www.agilent.com

For more information on Agilent Technol-

ogies’ products, applications or services,

please contact your local Agilent office.

The complete list is available at:

www.agilent.com/find/contactus

Americas

Canada (877) 894 4414

Brazil (11) 4197 3500

Mexico 01800 5064 800

United States (800) 829 4444

Asia Pacific

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 112 929

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 375 8100

Europe & Middle East

Belgium 32 (0) 2 404 93 40

Denmark 45 70 13 15 15

Finland 358 (0) 10 855 2100

France 0825 010 700*

*0.125 €/minute

Germany

49 (0) 7031 464 6333

Ireland 1890 924 204

Israel 972-3-9288-504/544

Italy 39 02 92 60 8484

Netherlands 31 (0) 20 547 2111

Spain 34 (91) 631 3300

Sweden 0200-88 22 55

United Kingdom 44 (0) 118 9276201

For other unlisted Countries:

www.agilent.com/find/contactus

Revised: October 14, 2010

Product specifications and descriptions

in this document subject to change

without notice.

Printed in USA, May 30, 2011

5990-8001EN

Agilent Advantage Services is com-

mitted to your success throughout

your equipment’s lifetime. We share

measurement and service expertise

to help you create the products that

change our world. To keep you com-

petitive, we continually invest in tools

and processes that speed up calibra-

tion and repair, reduce your cost of

ownership, and move us ahead of

your development curve.

www.agilent.com/quality

www.agilent.com/find/advantageservices

Agilent Email Updates

www.agilent.com/find/emailupdates

Get the latest information on the

products and applications you select.

www.lxistandard.org

LAN eXtensions for Instruments puts

the power of Ethernet and the Web

inside your test systems. Agilent is a

founding member of the LXI consortium.

Agilent Channel Partners

www.agilent.com/find/channelpartners

Get the best of both worlds: Agilent’s

measurement expertise and product

breadth, combined with channel

partner convenience.

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies N9010A Manuale utente

Agilent Technologies

Agilent Technologies ESA-E E4402B Manuale utente

Agilent Technologies

Agilent Technologies E4418B Manuale utente

Agilent Technologies

Agilent Technologies U5303A Guida utente

Agilent Technologies

Agilent Technologies 34134A Manuale utente

Agilent Technologies

Agilent Technologies 42941A Manuale operativo

Agilent Technologies

Agilent Technologies 16900 Series Manuale utente

Agilent Technologies

Agilent Technologies 11980A Manuale operativo

Agilent Technologies

Agilent Technologies E5061B Manuale utente

Agilent Technologies

Agilent Technologies E4418B Manuale utente

Agilent Technologies

Agilent Technologies U1731A Manuale utente

Agilent Technologies

Agilent Technologies 86120C Manuale utente

Agilent Technologies

Agilent Technologies U1271A Manuale utente

Agilent Technologies

Agilent Technologies FieldFox N9912A Manuale utente

Agilent Technologies

Agilent Technologies 8719ET Manuale

Agilent Technologies

Agilent Technologies N3970A Manuale operativo

Agilent Technologies

Agilent Technologies 8504B Manuale utente

Agilent Technologies

Agilent Technologies PSA Series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 86140B Series Manuale utente

Agilent Technologies

Agilent Technologies Cary 60 Manuale utente

Agilent Technologies

Agilent Technologies u8903a Manuale utente

Agilent Technologies

Agilent Technologies ESA-E Series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 4339B Manuale utente

Agilent Technologies

Agilent Technologies EPM-P Series Manuale per l'uso e la cura

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente