Agilent Technologies E5100A Manuale del proprietario

Agilent E5100A/B

Network Analyzer

Programming Manual

Agilent E5100A/B Network Analyzer

Programming Manual

SERIAL NUMBERS

This manual applies directly to instruments with serial number prex

JP2KC,JP3KC,JP4KC,JP5KC and MY405, or rmware revision 2.xx and 3.xx.

or additional important information about serial

numbers

,read \Serial Number" in Appendix A.

Agilent Part No. E5100-90087

Printed in JAPAN July 2001

Eleventh Edition

Notice

The information contained in this document is subject to change without notice

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without the prior written consent of the Agilent T

echnologies.

Agilent T

echnologies Japan, Ltd.

Component T

est PGU-Kobe

1-3-2, Murotani, Nishi-ku, Kobe-shi,

Hyogo

,651-2241 Japan

The customer shall have the personal, non-transferable rights to use

,copy

,or modify SAMPLE

PROGRAMS in this manual for the Customer's internal operations. The customer shall use the

SAMPLE PROGRAMS solely and exclusively for their own purpose and shall not license

,lease

market, or distribute the SAMPLE PROGRAMS or modication of any part thereof.

Agilent T

echnologies shall not be liable for the quality

,performance

,or behavior of the

SAMPLE PROGRAMS. Agilent T

echnologies especially disclaims that the operation of the

SAMPLE PROGRAMS shall be uninterrupted or error free. The SAMPLE PROGRAMS are

provided AS IS.

Agilent Technologies DISCLAIMS THE IMPLIED W

ARRANTIES OF MERCHANT

ABILITY AND

FITNESS FOR A P

ARTICULAR PURPOSE.

Agilent T

echnologies shall not be liable for any infringement of any patent, trademark,

. Agilent

Technologies does not warrant that the SAMPLE PROGRAMS are free from infringements of

such rights of third parties. However, Agilent Technologies will not knowingly infringe or

deliver software that infringes the patent, trademark, copyright, or other proprietary right of a

third party.

MS-DOS



is a U.S. registered trademark of Microsoft Corporation.



echnologies Japan, Ltd.

Manual Printing History

The manual printing date and part number indicate its current edition. The printing date

changes when anew edition is printed. (Minor corrections and updates that are incorporated

at reprint do not cause the date to change.) The manual part number changes when extensive

technical changes are incorporated.

July 1995

::::::

::::::::::::::::::::: :: :::::::::::::::::::::

:::: :: :::::::::::::::

First Edition

October 1995

::::::

:::::::::::::::::::::::

::::::::::::::::::::::: :::::::::::

Second Edition

November 1995

:::::::: :: :::::::::::::::::::::

:::: :::::::::::::::::::::

::::::::

Third Edition

December 1995

::::::

::::::::::::::::::::: ::::

::::::::::::::::::::: :: :: :::::

ourth Edition

September 1996

:::: :::::::::::::::::::

:::::::::::::::::::::::

::::::::::

Fifth Edition

May 1997

:::: :: :::::::::::::::::::

:::::::::::::::::::::::

:::::::::::::::::

Sixth Edition

December 1997

:::: :: :: :::::::::::::::::::

:::: :::::::::::::::::::

:::::::

Seventh Edition

January 1998

::::::::::::::::::::::::: ::::::::::::::::::::::: :: :::::::::::::::::

Eighth Edition

September 1998

:::::::::::::::::::::::::::::::::::

Nineth Edition (part number: E5100-90077)

March 2000

::::::::::::::::::::

:::::::::::::::::::::

Tenth Edition (part number: E5100-90077)

July 2001

::::::::::::::::

:::: ::::::::::::::::::

Eleventh Edition (part number: E5100-90087)

Typeface Conventions

Bold

Boldface type is used when aterm is dened. F

or example:

icons

are

symbols

Italics

Italic type is used for emphasis and for titles of manuals and other

publications

Italic type is also used for keyboard entries when aname or avariable

must be typed in place of the words in italics

or example:

copy

lename

means to type the word

copy

,to type a space, and then to

type the name of ale such as

file1

Computer

Computer font is used for on-screen prompts and messages.

HARDKEYS

Labeled keys on the instrument front panel are enclosed in

NNNNNNNNNNNNNNNNNNNNNNNNNN

SOFTKEYS

Softkeys located to the right of the LCD display are enclosed in

NNNNN

Contents

1. Introduction

How to Use This Manual .................. .. .......1-1

Target Reader .................. .. .. .. .......1-1

What's in This Manual? .................

....1-1

How to Use the Program Modules ...............

..1-2

Building a W

orking Program Using Program Modules ............. 1-2

Initializing Module ................. .. .. .......1-2

Example .................. .. .. ..........1-3

GPIB Overview .................

............1-4

Controller ........................

.........1-4

Device Selector .... .....................

.1-5

Preparation for Operation ................

......1-6

Using Instrument B

ASIC as the Controller (except for Option UKR) ......1-6

1. Connecting the GPIB Cables F

or Instrument B

ASIC ........... 1-6

2. Setting the GPIB A

ddress F

or Instrument B

ASIC ............ 1-6

3. Setting Up Instrument B

ASIC ................. ....1-6

Using an External Controller ...................

.....1-7

1. Connecting External GPIB Cables ..........

.........1-7

2. Setting the GPIB A

ddress .......................1-7

3. Preparing F

or HP B

ASIC Operation ...................1-7

Sample Program Disk ..............

..............1-8

Loading aProgram from Disk .............. ..........1-8

Reading the Sample Program Disk on aPC ...

..............1-8

Related Documentation Information ........ .............1-9

2. Setup and Measurement Program

Overview of GPIB Control .....

.................2-1

Sending GPIB Commands .... ................... .. . 2-1

Sending aQueryand Reading the Response .................2-2

utomating a Measurement Procedure ..

..............2-3

1. Setting the A

ctive Channel .................

......2-3

2. Setting the Measurement and F

ormat... .. .. .. .. .. .. .. .. 2-3

3. Sweep Setup ....................

.......... 2-4

4. Calibration . . . . . . . . . . . . . . . . . . . . . . .... .. .. . 2-4

Calibration Process .......................

.... 2-5

5. Device Connection .......................

.... 2-5

6. Triggering a Measurement . . . . . . . . . . . . . . . . . . . . . . .. 2-6

When Y

ou are Using an External Controller .... .. .. .. .. .. .. 2-6

7. Data Processing and Transfer .... .. ................ 2-6

8.ExitingtheProgram... .. .. .. .. .. .. .. .. .. .. .. .. 2-6

Sample Program -1: Basic Measurement . . . . . . . . . . . . . . . . . . . 2-7

Column Parameters and Variables . . . . . . . . . . . . . . . . . . . . . . . 2-8

Contents-1

3. Data Processing and Transfer

Introduction ..

.............

......3-1

Data Arrays . .............

.......3-1

Raw Data Array ...............

...... .. .....3-4

Data Array . ...............

......3-4

Unformatted Data Array ................. .. .. .. .. .3-4

ormatted Data Array ............

.........3-5

Calibration Coecient Array ............... .. ..

.....3-5

ccessing Arrays .................

.........3-5

Arrays for Memory Trace ..............

........3-6

ccessing Memory Array ..............

.........3-6

ccessing Trace Array ..........

............3-6

Data Transfer Methods ...........

...........3-7

ASCII Transfer ............

............3-7

Binary Transfer .............. .. .. ............3-8

Data Header .............. .. .. .............3-9

Getting Data from the Analyzer ........... .. .. ......3-10

Sample Program -2: Binary Data Transfer ......

...........3-11

4. Using the I/O P

ort

Introduction ............

.....................4-1

Output P

ort (Pin 5to 28) ......

..............4-1

Data Output .....

........................ 4-1

Input P

ort (Pin 21 to 28) ......................... . 4-2

Data Input ....... ....................... . 4-2

INPUT1 Input (Pin 2), OUTPUT1 Output (Pin 3), OUTPUT2 Output (Pin 4) ...4-3

Examples of Data I/O ..........................4-4

The P

arallel I/O Mode A(Option 005 Only) .................. 4-6

Data Output (4 Bit) ........................

...4-6

Data Input (8 Bit) ........................

....4-6

5. Using Status Reporting Function

General Status Register Model .................. ......5-1

Event Register .................. .. .. .........5-2

Enable Register .................... .. ........5-2

Status Byte Register .................

.......5-2

Transition Filter and Condition Register ...............

.. 5-3

Status Register Structure ........... .. .. ............5-4

OSPT

,OSNT .......

...............

. 5-7

OSPT (Operational Status P

ositive Transition Filter) .............5-7

OSNT (Operational Status Negative Transition Filter) . . . . .... .. .. . 5-8

How to Use the Status Registers in a Program . . .... .. .. .. .. .. . 5-9

Reading an Event Register Directly . . . . . . . .. .. .. .. .. .. . . 5-9

SRQ and Interrupt . . . . . . . . . . . . . . . . . . . .... .. .. .. 5-10

6. Programming Miscellaneous

Introduction . . . . . . . . . . . . . . . . . . . . . . . .......... 6-1

Using an External Controller and the E5100A/B T

ogether . . . . . . . . . . . . 6-1

Locking Out Local Operation (LOCAL LOCKOUT) .............. 6-1

How ToPass Control (PASS CONTROL) .. .. .. .. .. .. .. .. .. . 6-2

Controlling Instrument BASIC From an External Controller . . . . . . . . . . . 6-3

Referring to and Transferring an Array .... .. .. .. .. .. .. .. . 6-3

Referring to a Numeric Variable ..................... 6-3

Referring to a String Character Variable . . . . . . . . . . . . . . . . . . 6-3

Transferring a Numeric Variable ..................... 6-4

Contents-2

Altri manuali per E5100A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Strumento di misura

Agilent Technologies

Agilent Technologies 5977B Series Manuale utente

Agilent Technologies

Agilent Technologies FieldFox N9923A Manuale utente

Agilent Technologies

Agilent Technologies 4263B Manuale utente

Agilent Technologies

Agilent Technologies E4440A Guida rapida

Agilent Technologies

Agilent Technologies N9010AK-REA Manuale utente

Agilent Technologies

Agilent Technologies 8719D Manuale utente

Agilent Technologies

Agilent Technologies BioTek Epoch Manuale utente

Agilent Technologies

Agilent Technologies 8752C Manuale utente

Agilent Technologies

Agilent Technologies Twelfth 4287A RF LCR Manuale utente

Agilent Technologies

Agilent Technologies E5070B ENA Series Manuale utente

Agilent Technologies

Agilent Technologies 1660C Series Manuale utente

Agilent Technologies

Agilent Technologies E1420B Manuale utente

Agilent Technologies

Agilent Technologies ESA-L1500A Guida rapida

Agilent Technologies

Agilent Technologies E8362A PNA Series Guida rapida

Agilent Technologies

Agilent Technologies CrossLab CS Manuale utente

Agilent Technologies

Agilent Technologies N4373A Manuale utente

Agilent Technologies

Agilent Technologies WireScope 350 Manuale utente

Agilent Technologies

Agilent Technologies E5070A ENA Series Manuale utente

Agilent Technologies

Agilent Technologies N9020A Manuale utente

Agilent Technologies

Agilent Technologies WireScope 350 Manuale utente

Agilent Technologies

Agilent Technologies 4286A Manuale utente

Agilent Technologies

Agilent Technologies 8510C Manuale utente

Agilent Technologies

Agilent Technologies X Series Manuale utente

Agilent Technologies

Agilent Technologies FRG-700 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente