Agilent Technologies 8360B Manuale utente

Service Guide

Agilent Technologies

8360 B-Series Swept Signal Generator

8360 L-Series Swept CW Generator

Serial Number Prefixes:

This manual applies to any instrument with the following model number and serial number prefix combinations. You may have to

modify this manual so that it applies directly toyour instrument version. Refer to the “Instrument History” chapter.

Agilent Technologies 83620B/22B/23B/24B/30B

3844A and Below

Agilent Technologies 83640B/50B

4040A and Below

Agilent Technologies 83623L/30L

3844A and Below

Agilent Technologies 83640L/50L

4040A and Below

Part Number: 08360-90125

Printed in USA

October 2000

Notice

The material contained in this document is provided “as is”, and is subject to being changed, without notice, in future editions.

Further, to the maximum extent permitted by applicable law, Agilent disclaims all warranties, either express or implied with

regard to this manual and to any of the Agilent products to which it pertains, including but not limited to the implied warranties

of merchantability and fitness for a particular purpose. Agilent shall not be liable for errors or for incidental or consequential

damages in connection with the furnishing, use, or performance of this document or any of the Agilent products to which it

pertains. Should Agilent have a written contract with the User and should any of the contract terms conflict with these terms,

the contract terms shall control.

Questions or Comments about our Documentation?

We welcome any questions or comments you may have about our documentation. Please send us an E-mail at

[email protected].

Printed in USA July 2004

Notice

Hewlett-Packard to Agilent Technologies Transition

This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-

Packard's former test and measurement, semiconductor products and chemical analysis

businesses are now part of Agilent Technologies. To reduce potential confusion, the only

change to product numbers and names has been in the company name prefix: where a

product name/number was HP XXXX the current name/number is now Agilent XXXX. For

example, model number HP 8648 is now model number Agilent 8648.

Contacting Agilent Sales and Service Offices

The sales and service contact information in this manual may be out of date. The latest

service and contact information for your location can be found on the Web at:

http://www.agilent.com/find/assist

If you do not have access to the Internet, contact your field engineer. In any correspondence

or telephone conversation, refer to your instrument by its model number and full serial

number.

Certification

Agilent Tec

hnologies certies that this pro duct met its published sp ecications at the time

of shipment from the factory

.Agilen

hnologies further certies that its calibration

measuremen

ts are traceable to the United States National Institute of Standards and

Tec

hnology, to the extent allow

ed b

ythe Institute's calibration facilit

,and to the calibration

facilities of other In

ternational Standards Organization mem

bers.

arranty

This Agilen

hnologies instrumen

tpro duct is w

arranted against defects in material and

orkmanship for ap

erio d of one y

ear from date of shipmen

t. During the w

arran

yperio d,

Agilen T

hnologies Compan

ywill, at its option, either repair or replace pro ducts whic

h pro

to bedefectiv

or w

arran

yservice or repair, this pro duct m

ust bereturned to aservice facilitydesignated

by Agilent T

hnologies. Buy

er shall prepa

yshipping c

harges to Agilen

hnologies and

Agilen

hnologies shall pa

yshipping c

harges to return the pro duct to Buy

er. Ho

ever,

Buy

er shall pa

yall shipping c

harges, duties, and taxes for pro ducts returned to Agilen

hnologies from another coun

try

Agilen

hnologies w

arran

ts that its softw

are and rmw

are designated b

yAgilen

hnologies for use with an instrumen

twill execute its programming instructions when

properly installed on that instrumen

t. Agilen

hnologies does not w

arrant that the

operation of the instrumen

t, or soft

are, or rm

are will beunin

terrupted or error-free.

Limita

tion of Warranty

The foregoing w

arran

yshall not apply to defects resulting from improper or inadequate

main

tenance b

y Buy

er, Buy

er-supplied soft

ware or in

terfacing, unauthorized mo dication or

misuse, op eration outside of the en

vironmen

tal specications for the pro duct, or improper

site preparation or main

tenance.

NO OTHER W

ARRANTY IS EXPRESSED OR IMPLIED. A

GILENT TECHNOLOGIES

SPECIFICALL

YDISCLAIMS THE IMPLIED W

ARRANTIES OF MER

CHANT

ABILITY

AND FITNESS F

OR AP

TICULAR PURPOSE.

clusive Remedies

THE REMEDIES PRO

VIDED HEREIN ARE BUYER'S SOLE AND EX

CLUSIVE

REMEDIES. A

GILENT TECHNOLOGIES SHALL NOT BE LIABLE F

OR ANY

DIRECT, INDIRECT, SPECIAL, INCIDENT

AL, OR CONSEQUENTIAL DAMA

GES,

WHETHER BASED ON CONTRA

CT, TOR

T, OR ANY OTHER LEGAL THEOR

Assistance

duct maintenanc

eagr

ements and other customer assistanc

eagr

ements ar

eavailable for

gilent T

echnolo

gies pr

oducts. F

or any assistanc

e, c

ontact your ne

est A

gilent T

chnolo

gies

Sales and Servic

eOc



CopyrightAgilentTechnologies 1996, 1997, 1999, 2000

permission is prohibited, except as allowed under the copyrightlaws.

1400 FountaingroveParkway, Santa Rosa CA, 95403-1799, USA

Safety Notes

The following safet

ynotes are used throughout this man

ual. F

amiliarize y

ourself with each of

the notes and its meaning before op erating this instrument.

WARNING

arning denotes ahazard. It calls attention to a proced re which, if not

correctly performed or adhered to, co ld res lt in inj ry or loss of life. Do

not

proceed bey

ond aw

arning note ntil the indicated conditions are f lly

nderstood and met.

UTION

Caution denotes ahazard. It calls atten

tion to apro

cedure that, if not

correctly p erformed or adhered to, w

ould result in damage to or destruction

of the instrumen

t. Do

not

pro ceed bey

ond acaution sign un

til the indicated

conditions are fully understoodand met.

General Safety Considerations

WARNING

These servicing instr ctions are for se b

y q alified personnel only

oid

electrical shock, do not perform any servicing nless y

o are q alified to do

so.

The opening of cov

ers or remov

al of parts is lik

ely to expose dangero s

oltages. Disconnect the instr ment from all v

oltage so rces while it is being

opened.

The detachable po

wer cord is the instr ment disconnecting device. It

disconnects the mains circ its from the mains s pply before other parts of

the instr ment. The front panel switch is only a standb

y switch and is not a

LINE switch.

The po

er cord is connected to internal capacitors that may remain liv

e for 5

seconds after disconnecting the pl g from its po

wer s pply

This is aSafety Class Iprod ct (pro

vided with aprotectiv

eearthing gro nd

incorporated in the po

er cord). The mains pl g shall only be inserted in a

sock

et o tlet pro

vided with aprotectiv

eearth contact. Any interr ption of the

protective cond ctor, inside or o tside the instr ment, is lik

ely to mak

ethe

instr ment dangero s. Intentional interr ption is prohibited.

For contin ed protection against fire hazard replace line f se only with same

type and rating (F 5A/250V). The se of other f ses or material is prohibited.

CAUTION

Alw

ays use the three-prong ac po

er cord supplied with this instrumen

ailure to ensure adequate earth grounding by not using this cord maycause

instrument damage.

Before switc

hing on this pro duct, mak

esure that the line v

oltage selector

switc

his set to the v

oltage of the p ow

er supply and the correct fuse is

installed. Assure the supply voltage is in the specied range.

This pro duct is designed for use in Installation Category IIand P

ollution

Degree 2per IEC 1010 and 664 respectively

Ven

tilation Requiremen

ts:

When installing the pro duct in acabinet, the

con

ection in

to and out of the pro duct m

ust not be restricted. The ambien

temperature (outside the cabinet) must be less than the maximum op erating

temperature of the product b



C for ev

ery 100 w

atts dissipated in the

cabinet. If the total po

er dissipated in the cabinet is greater than 00

atts, then forced con

vection must beused.

Before Applying P

erify that the pro duct is congured to match the a

ailable main po

er source per the input

er conguration instructions pro

vided in this man

ual.

If this pro duct is to beenergized via an autotransformer makesure the common terminal is

connected to the neutral (grounded side of the mains supply).

vii

viii

Preface

This man

ual pro

vides service information for the Agilen

hnologies 360 B-Series sw

ept

signal generator and Agilen

echnologies 360 L-Series swept CW generator.

anual Conv

entions

ront-Panel Key

This represen

ts ak

ey ph

ysically lo cated on the instrumen

NNNNNNNNNNNNNNNNNNNNNNN

Softkey

This indicates a \softkey

," a key whose label is determined b

ythe rm

are of

the instrumen

Screen Text

This indicates text displa

ed on the instrument's screen.

Altri manuali per 8360B

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Agilent Technologies Generatore portatile

Agilent Technologies

Agilent Technologies N5161A Manuale utente

Agilent Technologies

Agilent Technologies N4971A Manuale utente

Agilent Technologies

Agilent Technologies 33120A Manuale utente

Agilent Technologies

Agilent Technologies ESG-D Series Manuale utente

Agilent Technologies

Agilent Technologies E4438CK-601 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 81110A Manuale utente

Agilent Technologies

Agilent Technologies Agilent 33500 Series Manuale utente

Agilent Technologies

Agilent Technologies E4400B Manuale utente

Agilent Technologies

Agilent Technologies PSG Series Guida rapida

Agilent Technologies

Agilent Technologies E8306A Manuale utente

Agilent Technologies

Agilent Technologies E4438C Istruzioni operative

Agilent Technologies

Agilent Technologies ESG series Manuale utente

Agilent Technologies

Agilent Technologies 8340B Manuale utente

Agilent Technologies

Agilent Technologies ESG series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies ESG-D Series Guida rapida

Agilent Technologies

Agilent Technologies E8241A Manuale utente

Agilent Technologies

Agilent Technologies E8257C Manuale utente

Agilent Technologies

Agilent Technologies E4423B Guida rapida

Agilent Technologies

Agilent Technologies n5181a Manuale di installazione

Agilent Technologies

Agilent Technologies E8267C Manuale utente

Agilent Technologies

Agilent Technologies 81141A Series Manuale utente

Agilent Technologies

Agilent Technologies 8640b Manuale utente

Agilent Technologies

Agilent Technologies ESG series Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies E4428C Manuale utente

Manuali Generatore portatile popolari di altre marche

Kohler

Kohler 20EORZ Manuale di istruzioni

Powerhorse

Powerhorse 83171 Manuale utente

HURST

HURST ML-630-SI Manuale utente

ETQ

ETQ TG4000 Manuale utente

Briggs & Stratton

Briggs & Stratton 40265 Guida all'installazione

ConMed

ConMed 7550 Manuale utente

Owon

Owon Waveform Generator Manuale utente

evertz

evertz 7700 Series Manuale utente

Power Stroke

Power Stroke PS906025 Manuale utente

Firefly

Firefly Cygnus CYG2400/460/24 Manuale utente

Draper

Draper PG950S Aggiornamento firmware

PowerBoss

PowerBoss PowerBoss Manuale utente

SDMO

SDMO SH 4000 Manuale utente

EINHELL

EINHELL STE 5500 Manuale utente

Wanco

Wanco WI3000P Manuale utente

Full Boar

Full Boar FBT-3300 Manuale utente

Dwyer Instruments

Dwyer Instruments ASG Manuale utente

Westinghouse

Westinghouse WH1000i Series Manuale utente