Agilent Technologies 16334A Manuale operativo

Agilent 16334A Test Fixture

Operation and Service Manual

Second Edition

Agilent Part No. 16334-90000

December 1999

Printed in Japan

Notices

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright.All rights

are reserved. No part of this document may be photocopied, reproduced, or translated to

another language without the prior written consent of the Agilent Technologies.

Agilent Technologies Japan, Ltd.

Component Test PGU-Kobe

1-3-2, Murotani, Nishi-Ku, Kobe-shi, Hyogo, 651-2241 Japan

Manual Printing History

The manual’s printing date and part number indicate its current edition. The printing date

changes when a new edition is printed. (Minor corrections and updates that are

incorporated at reprint do not cause the date to change.) The manual part number changes

when extensive technical changes are incorporated.

January 1990 First Edition (part number: 16334-90000)

December 1999 Second Edition (part number: 16334-90000)

Safety Summary

The following general safety precautions must be observed during all phases of operation,

service, and repair of this instrument. Failure to comply with these precautions or with

specific WARNINGS elsewhere in this manual may impair the protection provided by the

equipment. In addition it violates safety standards of design, manufacture, and intended use

of the instrument.

The Agilent Technologies assumes no liability for the customer’s failure to comply with

these requirements.

• Ground The Instrument

To avoid electric shock hazard, the instrument chassis and cabinet must be connected to

a safety earth ground by the supplied power cable with earth blade.

• DO NOT Operate In An Explosive Atmosphere

Do not operate the instrument in the presence of flammable gasses or fumes. Operation

of any electrical instrument in such an environment constitutes a definite safety hazard.

• Keep Away From Live Circuits

Operating personnel must not remove instrument covers. Component replacement and

internal adjustments must be made by qualified maintenance personnel. Do not replace

components with the power cable connected. Under certain conditions, dangerous

voltages may exist even with the power cable removed. To avoid injuries, always

disconnect power and discharge circuits before touching them.

•DO NOT Service Or Adjust Alone

Do not attempt internal service or adjustment unless another person, capable of

rendering first aid and resuscitation, is present.

•DO NOT Substitute Parts Or Modify Instrument

Because of the danger of introducing additional hazards, do not install substitute parts

or perform unauthorized modifications to the instrument. Return the instrument to a

Agilent Technologies Sales and Service Office for service and repair to ensure that

safety features are maintained.

•Dangerous Procedure Warnings

Warnings, such as the example below, precede potentially dangerous procedures

throughout this manual. Instructions contained in the warnings must be followed.

WARNING Dangerous voltages, capable of causing death, are presenting this instrument. Use

extreme caution when handling, testing, and adjusting this instrument.

Safety Symbol

General definitions of safety symbols used on the instrument or in manuals are listed

below.

Instruction Manual symbol: the product is marked with this symbol when it is necessary for

the user to refer to the instrument manual.

Alternating current.

Direct current.

On (Supply).

Off (Supply).

In position of push-button switch.

Out position of push-button switch.

Frame (or chassis) terminal. A connection to the frame (chassis) of the equipment which

normally include all exposed metal structure.

WARNING This warning sign denotes a hazard. It calls attention to a procedure, practice,

condition or the like, which, if not correctly performed or adhered to, could result in

injury or death to personnel.

CAUTION This Caution sign denotes a hazard. It calls attention to a procedure, practice, condition or

the like, which, if not correctly performed or adhered to, could result in damage to or

destruction of part or all of the product.

NOTE Note denotes important information. It calls attention to a procedure, practice, condition or

the like, which is essential to highlight.

Certification

Agilent Technologies certifies that this product met its published specifications at the time

of shipment from the factory. Agilent Technologies further certifies that its calibration

measurements are traceable to the United States National Institute of Standards and

Technology, to the extent allowed by the Institution’s calibration facility, or to the

calibration facilities of other International Standards Organization members.

Warranty

This Agilent Technologies instrument product is warranted against defects in material and

workmanship for a period corresponding to the individual warranty periods of its

component products. Instruments are warranted for a period of one year. Fixtures and

adapters are warranted for a period of 90 days. During the warranty period, Agilent

Technologies will, at its option, either repair or replace products that prove to be defective.

For warranty service or repair, this product must be returned to a service facility designated

by Agilent Technologies. Buyer shall prepay shipping charges to Agilent Technologies and

Agilent Technologies shall pay shipping charges to return the product to Buyer. However,

Buyer shall pay all shipping charges, duties, and taxes for products returned to Agilent

Technologies from another country.

Agilent Technologies warrants that its software and firmware designated by Agilent

Technologies for use with an instrument will execute its programming instruction when

property installed on that instrument. Agilent Technologies does not warrant that the

operation of the instrument, or software, or firmware will be uninterrupted or error free.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate

maintenance by Buyer, Buyer-supplied software or interfacing, unauthorized modification

or misuse, operation outside the environmental specifications for the product, or improper

site preparation or maintenance.

IMPORTANT No other warranty is expressed or implied. Agilent Technologies specifically disclaims the

implied warranties of merchantability and fitness for a particular purpose.

Exclusive Remedies

The remedies provided herein are buyer’s sole and exclusive remedies. Agilent

Technologies shall not be liable for any direct, indirect, special, incidental, or

consequential damages, whether based on contract, tort, or any other legal theory.

Assistance

Product maintenance agreements and other customer assistance agreements are available

for Agilent Technologies products.

For any assistance, contact your nearest Agilent Technologies Sales and Service Office.

Addresses are provided at the back of this manual.

Typeface Conventions

Bold Boldface type is used when a term is defined. For

example: icons are symbols.

Italic Italic type is used for emphasis and for titles of

manuals and other publications.

[Hardkey] Indicates a hardkey labeled “Hardkey.”

Softkey Indicates a softkey labeled “Softkey.”

[Hardkey] - Softkey1 - Softkey2 Indicates keystrokes [Hardkey] - Softkey1 -

Softkey2.

Contents

1. Operation

DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Typical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ZERO OFFSET ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2. Service

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Contents

1 Operation

This operation note provides complete information on the 16334A Test Fixture.

10 Chapter1

Operation

DESCRIPTION

The 16334A Testfixture was designed for use with the following instruments:

4192A LF lmpedance Analyzer

4194A lmpedanoe/Gain-Phase Analyzer

4274A Mu-ti-Frequency LCR Meter

4275A Multi-Frequency LCR Meter

4276A LCZ Meter

4277A LCZ Meter

4278A 1kHz/1MHz Capacitance Meter

The 16334A is a direct attachment, 4-terminal pair type fixture which is equipped with a

tweezer type probe for measurement of leadless components such as chip capacitors.

The tweezer tips are replaceable. The distance between the tweezer tips is continuously

adjustable according to the distance between the DUT terminals. A compensation block is

furnished for compensation to be minimize the effects of residual impedance and the stray

admittance.

The specifications of the 16334A are given in Table 1-2, and the typical characteristics are

shown in Figure 1-2, and listed in Table 1-3.

Figure 1-1 Product Overview

Table 1-1 Accessories

Description Agilent Part No

Compensation Block 16334-60001

Indice

Altri manuali Agilent Technologies Apparecchiature di prova

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Manuale

Agilent Technologies

Agilent Technologies Infiniium DCA Manuale

Agilent Technologies

Agilent Technologies InfiniiVision 7000A Series Manuale

Agilent Technologies

Agilent Technologies J-BERT N4903A Manuale utente

Agilent Technologies

Agilent Technologies U1602B Manuale

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Manuale utente

Agilent Technologies

Agilent Technologies U1610/20A Manuale utente

Agilent Technologies

Agilent Technologies 85050B Manuale

Agilent Technologies

Agilent Technologies Infi niium 9000 Series Manuale dell'operatore

Agilent Technologies

Agilent Technologies E4400-60598 Guida rapida

Agilent Technologies

Agilent Technologies Ininiium 9000 Manuale utente

Agilent Technologies

Agilent Technologies DSO-X-2024A Manuale utente

Agilent Technologies

Agilent Technologies N5230-60102 Manuale di installazione e funzionamento

Agilent Technologies

Agilent Technologies 85032F Manuale

Agilent Technologies

Agilent Technologies PHD-4 Manuale utente

Agilent Technologies

Agilent Technologies 8924C Manuale di servizio

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X Series Manuale utente

Agilent Technologies

Agilent Technologies 8960 Manuale utente

Agilent Technologies

Agilent Technologies N4010A Istruzioni per l'installazione e il funzionamento

Agilent Technologies

Agilent Technologies 8156A Istruzioni operative

Agilent Technologies

Agilent Technologies 3070 Series Istruzioni operative

Agilent Technologies

Agilent Technologies N4413A Manuale utente

Agilent Technologies

Agilent Technologies E6392B Manuale utente

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X- Series Manuale dell'operatore

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente

Ritmix

Ritmix RAT-701 Manuale utente