TO START; PRESS BOTH BUTTON AND HOLD 3 sec
To scroll through the menus: press briefly the left button.
To make your selection from one of the menus: press the right but-
ton.From STOP Mode,(The screen w/the STOP icon) if you hold the
left button for more than 2 seconds you will be in Configuration Mode.
From any screen: if you hold the left button for more than 2 seconds,
it will bring you back to Stop Mode. Also, If you delay too long on a cer-
tain screen, it will bring you automatically back to Stop Mode, .
This is the main menu for the AStrO.
“174”:Time in minutes available to record data.
"C°": Choice that was made between Celcius over
Fahrenheit (C° or F°).
"D": Dynamic mode over Peak Delay (D or P).
"(1), (2)"...: Number of strips or beacons at that track.
"Km/h": Choice that was made between Metric or Imperial
(mph).
"C": (on the right bottom of screen) tells you to press right
button to get into the counters.
Press the left button to pass to the next menu.
Pressing the right button will manually turn off the
unit.
If on this menu you read "No Maximum", it means you
have no data in memory.
When data has been stored, pressing the right button will
bring you to the Maximum RPM, Speed, Gear, Temp 1,
Temp 2, combining all the laps and best of all laps.
Press the left button to pass to the next menu.
Toll Free:1 (877) 462-7296 5
TO START RECORDING
TO TURN OFF
TO REVIEW MAXIMUMS ONLY
BEFORE BEGINNING TO START YOUR RECORDING GO TO CON-
FIGURATION MENUS (Page 8 OF THIS MANUAL)
www.Alfano-usa.com
