Alnor 9870 Manuale utente
Model 9870
Air Velocity Meter
OWNER’S MANUAL
LIMITATION OF WARRANTY AND LIABILITY
Seller warrants the goods sold hereunder, under normal use and service as
described in the operator's manual, shall be free from defects in workmanship and
material for (24) months, or the length of time specified in the operator's manual, from
the date of shipment to the customer. This warranty period is inclusive of any
statutory warranty. This limited warranty is subject to the following exclusions:
a. Hot-wire or hot-film sensors used with research anemometers, and certain other
components when indicated in specifications, are warranted for 90 days from the
date of shipment.
b. Parts repaired or replaced as a result of repair services are warranted to be free
from defects in workmanship and material, under normal use, for 90 days from
the date of shipment.
c. Seller does not provide any warranty on finished goods manufactured by others or
on any fuses, batteries or other consumable materials. Only the original
manufacturer's warranty applies.
d. Unless specifically authorized in a separate writing by Seller, Seller makes no
warranty with respect to, and shall have no liability in connection with, goods
which are incorporated into other products or equipment, or which are modified by
any person other than Seller.
The foregoing is IN LIEU OF all other warranties and is subject to the LIMITATIONS
stated herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE.
TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE
USER OR BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL
LOSSES, INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING
CLAIMS BASED ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR
OTHERWISE) SHALL BE THE RETURN OF GOODS TO SELLER AND THE
REFUND OF THE PURCHASE PRICE, OR, AT THE OPTION OF SELLER, THE
REPAIR OR REPLACEMENT OF THE GOODS. IN NO EVENT SHALL SELLER BE
LIABLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES.
SELLER SHALL NOT BE RESPONSIBLE FOR INSTALLATION, DISMANTLING OR
REINSTALLATION COSTS OR CHARGES. No Action, regardless of form, may be
brought against Seller more than 12 months after a cause of action has accrued. The
goods returned under warranty to Seller's factory shall be at Buyer's risk of loss, and
will be returned, if at all, at Seller's risk of loss.
Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY
AND LIABILITY, which contains the complete and exclusive limited warranty of Seller.
This LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or
its terms waived, except by writing signed by an Officer of Seller.
Service Policy
Knowing that inoperative or defective instruments are as detrimental to TSI as they
are to our customers, our service policy is designed to give prompt attention to any
problems. If any malfunction is discovered, please contact your nearest sales office or
representative, or call Customer Service department at (800) 424-7427 (USA) and (1)
651-490-2811 (International).
1
Table of Contents
CHAPTER 1 Setup ................................................ 3
Unpacking ......................................................... 3
Installing the batteries ....................................... 3
CHAPTER 2 Operation.......................................... 4
Extending the probe .......................................... 4
Measuring temperature...................................... 5
Measuring velocity............................................ 6
Switching on the power..................................... 6
Selecting temperature/velocity display.............. 7
Selecting the sensor response............................ 7
Batteries............................................................. 8
CHAPTER 3 Maintenance................................... 10
Probe tip .......................................................... 10
Cases ............................................................... 11
Storage............................................................. 11
Service............................................................. 11
CHAPTER 4 Troubleshooting ............................. 12
APPENDIX A Standard Velocity vs. Actual
Velocity .......................................................... 14
APPENDIX B Specifications............................... 17
3
CHAPTER 1
Setup
This chapter guides you through unpacking and
installing batteries into your Model 9870. See
Chapter 2 for a detailed description of the digital
meter's operating functions.
Unpacking
Carefully unpack the instrument and accessories
from the shipping container. Check the individual
parts against the list of components in Table 1; if
any are missing or damaged, notify TSI immedi-
ately.
Table 1: List of components
Qty Item
1 Model 9870
1 Carrying case
4 AA alkaline batteries
1 Operation and service manual
Installing the batteries
Install batteries by loosening the screw in the
battery access cover located on the back of the
instrument. Insert four AA-size batteries in the
battery tube according to the polarity indicated
4
under the battery access cover. Replace the battery
access cover and tighten the screw.
If the batteries are installed incorrectly, no damage
to the meter will occur, but the instrument will not
function.
CHAPTER 2
Operation
This chapter thoroughly explains how to operate the
meter.
Extending the probe
The Model 9870 contains a telescoping velocity
and temperature measuring probe which is shipped
in its collapsed position. To expose the probe to the
flow for air velocity or temperature measurements,
grasp the tip of the probe and pull firmly.
To retract or collapse the probe, simply push the tip
of the probe straight toward the handle. When you
collapse the probe, be sure to allow room for the
cable to move freely out of the base of the probe.
Hindering the movement of the cable at the base of
the probe will make it difficult to collapse the
probe.
5
Always store the probe in its retracted position
when not in use, in order to protect the sensor.
NOTE: As you handle the probe, take care not to
bump it against duct walls or other objects. The
probe has been made as rugged as possible, but it
can be damaged by careless handling.
Measuring temperature
Whenever you plan to measure both temperature
and velocity, it is best to measure temperature first.
HINT for measuring temperature: Switch the meter
to the temperature mode before turning the
instrument on. This will minimize the time
required for the temperature sensor to stabilize.
The temperature measuring sensor is in the window
near the end of the probe. Extend the probe and
expose the sensor in the window to the air where
you want to measure temperature.
When you measure temperature in moving air,
orient the window of the probe so that the air flows
through the window. This will minimize the time
required for the temperature readings to stabilize.
6
Measuring velocity
For highest accuracy, it is important to properly
align the probe to the flow. The measured air must
flow through the sensor window at the end of the
probe.
HINT for measuring velocity: If the probe is left to
warm up for more than a few seconds at veloci-
ties below 50 fpm (0.25 meters/sec), it will
require more time to stabilize when it is inserted
into a higher flow. This is because the probe
assembly self heats at such low flows, and must
then re-stabilize when placed into higher flow.
For best response time at velocities of 100-200
fpm (0.5-1 meters/sec), it is recommended to first
place the probe into the flow, and then turn the
meter on.
When the meter is in the velocity mode the
temperature sensor will be warmed by heat from
the velocity sensor. If the meter is then switched to
temperature mode, it will read several degrees high
until the temperature sensor can cool. Therefore,
when you plan to measure both temperature and
velocity, it is best to measure temperature first.
Switching on the power
Turn on the Model 9870 using the ON/OFF switch.
It will display battery life for the first 5 seconds.
7
This number represents the approximate percentage
of battery life remaining, and will range from less
than 0% for a low battery to something over 100%
for a short time while the “surface charge” of the
new batteries burns off.
After 5 seconds the meter will begin to display
velocity or temperature in the selected units. Units
available for display are standard feet per minute (S
fpm) and degrees Fahrenheit (°F), and standard
meters per second (S m/s) and degrees Celsius (°C),
depending on which instrument you purchased. The
units of measure cannot be changed in the field.
Selecting temperature/velocity display
The TEMP/VEL switch on the instrument allows
you to switch between the instrument’s two
measuring modes. Slide the switch to the TEMP
position to read the current temperature, or to the
VEL position to read the current velocity.
Selecting the sensor response
The Model 9870 has a FAST/SLOW response
switch for setting the sensor response speed. In the
slow response mode, it displays the average
velocity measured during the past 12 seconds. This
is a running average, so the display is updated once
a second. In the fast response mode, the meter
displays the average velocity measured during the
8
past 3 seconds. The way the meter averages
velocity is by saving the velocity measured each
second into separate locations in memory. Every
second, a new reading is taken and the oldest
reading is thrown out. Depending on the position of
the sensor response switch, either the last 3
readings or all 12 readings will be averaged for
display.
Batteries
The Model 9870 is powered by four AA-size
batteries. TSI ships the instrument with alkaline
batteries, but nickel-cadmium rechargeable
batteries may be used. Keep in mind that battery
life is a function of the velocity being measured: the
higher the velocity, the shorter the life. Table 2
shows typical battery life for both alkaline and
nickel-cadmium batteries at three velocities.
Table 2: Typical battery life* at three velocities
Air Velocity
alkaline
life
nickel-
cadmium life
(fpm) (m/s) (hrs) (hrs)
100 0.5 10 2-1/2
1000 5.0 6 1-3/4
2000 10.0 5 1-1/2
* At 20°C
Indice
Altri manuali Alnor Strumento di misura
Alnor
Alnor HM680 Manuale utente
Alnor
Alnor AirGard 405 Manuale utente
Alnor
Alnor AVM410 Manuale operativo
Alnor
Alnor Airflow Proood PH731 Manuale utente
Alnor
Alnor RVA+ Manuale utente
Alnor
Alnor 9850 Manuale utente
Alnor
Alnor Balometer ABT701 Manuale utente
Alnor
Alnor APM 150 Manuale utente
Alnor
Alnor 275 Manuale utente
Alnor
Alnor ALNOR AVM430 Manuale utente
