ALPA Exacto BA070 Manuale utente
Lingua originale: inglese REV. 1 - 10/20
Exacto
metrolog
y
ALPA_MICROMETER_EXACTO_IP65
1. Locking device
2. LCD display
3. Thimble (or ratchet
friction thimble)
4. Ratchet stop (or quick
drive)
5. ON/OFF···SET botton
6. ABS/INC···UNIT botton
7. Battery cap
DESCRIPTION
6
5
321 4
7
EN
Inch mode
Relative measuring
Absolute measuring
Battery voltage is low
Set the origin
Resolution 0,001 mm
Measuring force 5~10N
Consumption <=25μA
Working temperature 0 ~ 40°C
Storage temperature -20 ~ 60°C
Protection IP65
TECH DATA
in:
INC:
ABS:
Set:
in
-8.8.8.888
ABS INC Set
ALPA_MICROMETER_EXACTO_IP65
FEATURE
Press and Release
Press and hold (more than 1 sec.)
Two ways of pressing key are used in the following illustration:
EN
SET
UNIT
ON/OFF and SET
ABS/INC and UNIT
ON/OFF
ABS/INC
FEATURE
Power on/off
Absolute/Relative measuring mode conversion
Set the origin
Metric/Inch measuring mode conversion
ALPA_MICROMETER_EXACTO_IP65
Display “E 1” Measuring value over display range Reset the origin or convert to relative
measuring mode
Display “E 2” The origin is too great Reset the origin
Display “E 3” 1. The micrometer is disturbed
2. Something wrong with sensor
1. Replace the battery
2. Return the micrometer for repair
Measuring value is not correct 1. Measuring surface are dirty
2. The origin isn't correct
1. Clean measuring surfaces
2. Reset the origin
Display is confusing or dead Suffer to strong disturb Reset battery
No display
Display is blurring
Appears
Battery voltage < 1.45V Replace battery
FAILURE CAUSES REPAIRING
EN
MAINTENANCE
- Do not subject the gauge to blows or knocks
- Do not drop the gauge or apply excessive force to the gauge
- Do not disassemble the gauge
- Do not press the key with a pointed object
- Do not use or store the gauge under direct sunlight, or in an excessively
hot or cold environment
- Do not subject the gauge in strong magnetic elds and high voltage
environment
- Use soft cloth or cotton cleaning the gauge
- Do not use any organic solvent such as acetone etc.
- The spindle is designed so that it cannot be removed from the inner
sleeve
- Do not move it past the upper limit of the measuring range
- Remove the battery if the gauge not use for a long time
BATTERY CHANGE
Battery type SR44, 1.5V.
ALPA_MICROMETER_EXACTO_IP65
1. Dispositivo di bloccaggio
2. Display LCD
3. Tamburo di avanzamento
4. Nottolino di arresto
5. Tasto ON/OFF···SET
6. Tasto ABS/INC···UNIT
7. Tappo batteria
DESCRIZIONE
6
5
321 4
7
IT
Modalità Inch
Misurazione relativa
Misurazione assoluta
Indicatore batteria scarica
Impostazione origine
Risoluzione 0,001 mm
Forza di misura 5~10N
Consumo <=25μA
Temperatura di utilizzo 0 ~ 40°C
Temperatura di stoccaggio -20 ~ 60°C
Protezione IP65
DATI TECNICI
in:
INC:
ABS:
Set:
in
-8.8.8.888
ABS INC Set
ALPA_MICROMETER_EXACTO_IP65
FUNZIONAMENTO
Premere e Rilasciare
Tenere premuto (più di 1 sec.)
Ci sono 2 modalità di pressione dei tasti indicate in seguito:
Questo manuale è adatto per i seguenti modelli
51
Indice
Lingue:
Altri manuali ALPA Strumento di misura
ALPA
ALPA AA052 Manuale utente
ALPA
ALPA MEGAline Manuale utente
ALPA
ALPA AA082 Manuale utente
ALPA
ALPA LITEsurf Manuale utente
ALPA
ALPA MEGArod Manuale utente
ALPA
ALPA PRO67 Manuale utente
ALPA
ALPA MEGAline AA084 Manuale utente
ALPA
ALPA MEGAwhiz Manuale utente
ALPA
ALPA AA021 Manuale utente
ALPA
ALPA Exacto BB002 Istruzioni utente
