Amano TCX-22 Manuale utente

AMANO®

TCX-22

Electronic Time Clock

Operation Manual

Thank you…

for purchasing another fine product from

Amano Cincinnati, Inc.

Important

Note that the government standard for DST is subject to change. Your

clock is factory-set for correct DST based upon when it was

manufactured, but any revision to DST begin or end dates may require

updating the system-set DST calendar.

If you live in Arizona, Hawaii, parts of Indiana, or any other area that

does not use Daylight Saving Time, refer to this document’s DST

settings instruction for details regarding disabling the DST function.

Do not return this clock to the retailer. If you have any questions or need

assistance, please call us toll free at:

1-800-253-9836

Proprietary Notice

This document contains proprietary information and such information

may not be reproduced in whole or part without the written permission

from Amano Cincinnati, Inc., 140 Harrison Ave., Roseland, New Jersey,

07068.

Amano Cincinnati, Inc. reserves the right to make equipment changes

and improvements, which may not be reflected in this document.

Portions of this document may have been updated to include the latest

hardware or firmware version, if applicable.

We recommend that this document be read in its entirety before any

attempt is made to operate the equipment.

Need Ribbons, Keys and Accessories?

Visit

www.amano.com

Call - (800)-253-9836

Amano TCX-22 Operation Manual 1

Specifications

Power Requirements:

For Clock Input: AC16.5V, 60Hz, 0.6A (Max.)

For AC Adapter: AC100V ± 10%, 50/60Hz

AC120V ± 10%, 60Hz

AC230V ± 10%, 50/60Hz

Battery: 12V Sealed Rechargeable Lead-Acid Battery

NP1.2-12 12V 1.2Ah

Ambient Temperature: -10°C to 45°C (14°F to 113°F)

Ambient Humidity: 10% to 90% (non-condensing)

Dimensions: 6 7/8” (175 mm) wide x 8 1/4” (210 mm) high x

6 1/4” (159 mm) deep

Weight: Approximately 5.9 Kg (13 lbs.)

Environment: Indoor use only; dust-free environment. Keep

out of direct sunlight.

External View

Print Button

Analog Clock

Print Window

LCD Display

Printer Platen

and Margin

ustment

Cover Lock

2 Amano TCX-22 Operation Manual

Removing the Cover & Packing Material

1. Turn the key clockwise to unlock the

cover.

2. Lift the cover up, then pull towards you

to remove it.

3. Lift the printer block and remove the

spacer.

4. Remove the spacer between the Ribbon

Cartridge and the Printer

Carriage Tab.

5. Reinstall the cover of your unit.

Internal View

LCD Display

Program Buttons

Reset Button

Analog Clock

Ribbon Cartridge

Card Stopper

Adjustment Screw

Printer Platen

Battery Compartment

Amano TCX-22 Operation Manual 3

Power Options

The TCX-22 can be powered by either an AC Adapter or a 12 volt

Sealed Rechargeable battery. The Battery Power Switch on the base

enables you to turn the Battery Power ON or OFF. The battery is

equipped to maintain normal operations for 1 week and/or 5000 prints in

the event of an A/C power failure.

Installing the 12 Volt Battery

1. Remove the AC Adapter if equipped

and remove the cover.

2. Lay the unit down clock face up

3. Remove left battery bracket screws

4. Pull out the left battery bracket.

5. Carefully insert the battery with the

positive and negative clips facing

outwards and to the right.

6. Install the left battery bracket

7. Observing polarity, attach the “Red”

Positive female wire harness to the

“Red” (+) Positive male connector on

the Battery.

8. Attach the “Black” Negative female harness wire to the “Black” (-)

Negative connector located on the battery.

9. Set the Battery Power to the “Connected” position.

Note: Recharge the battery at least every two weeks or every 5000 prints. The

minimum charging time should be 12 hours and the switch should be

turned off when the unit is not in use.

Connecting the AC Adapter

1. Set the Battery Power Switch to the OFF position.

2. Verify that the AC outlet voltage falls in the range of 100-240 Volts

AC. Verify that the cord and plug are appropriate for your AC source.

3. Plug the connector end of the AC Adapter into the Power Connector

and the other end into a properly grounded 120 or 240 Volt outlet.

4 Amano TCX-22 Operation Manual

Make a Test Print

1. Make sure that there is power to the TCX-22 (Refer to Page 3).

2. Insert a piece of paper or time card into the TCX-22. The clock will

automatically print YEAR, MONTH, DATE and TIME with AM or PM.

3. If the imprint is satisfactory, the TCX-22 is ready for use.

4. If you wish to change the time and/or print style on the TCX-22, enter

into Program Mode for various print styles. The next page gives

instructions on programming the TCX-22 to fit your needs.

Adjusting the Margin

1. Unlock and remove the

cover. Note – suggest

unplugging the clock

before performing

margin adjustment.

2. Locate the Card Stopper

Adjustment Screw on the

right side of the clock,

below the printer platen.

3. Position a piece of paper or

time card as desired.

4. Loosen the screw to move

the Card Stopper forward or

back. Tighten the screw as

needed. (See top

illustration.) The print

margin can be adjusted to a

maximum of 7/8” (22 mm).

Illuminated Print Option

The TCX-22 is equipped with a feature that allows

the print area to illuminate. The switch is located

on the back panel. When connected to an AC

adapter the unit will stay illuminated. When used

with a battery, it illuminates for about 20 minutes

every time the LED switch is pressed.

Amano TCX-22 Operation Manual 5

Program Mode Guide

Unlock and remove the cover. Locate the PROGRAM, CHANGE and

ENTER buttons on top of the clock.

The PROGRAM button is used to enter and exit the Program Mode.

Press the PROGRAM button at any time to exit the Program Mode. If a

program step is in the process of being changed when this button is

pushed, the new information will not be saved.

The CHANGE button is used to change the information on the display.

When you are reviewing the main programming menu, use the CHANGE

button to advance to the next programming step. When you are revising

a programming step, use the CHANGE button to change the blinking

information.

The ENTER button is used to accept the information shown on the

display and save it in memory.

The RESET button is located on the right-side of the clock. Pressing this

button will clear any jams or errors.

Entering the Program Mode

1. Unlock and remove the cover.

2. Press and hold the PROGRAM button to access the Main

Programming Menu. The Main Programming Menu consists of the

Following

Menu Code Menu Function

P1 dA E Sets the date

P2 Cloc

Sets the clock time

P3 dLS Disable/Enable Daylight Saving Time

P4 Prn Sets the print style using Quick Print Set-Up Codes

P5 O hr Accesses Other Options Menu

6 Amano TCX-22 Operation Manual

3. When P1 dA Eflashes in the display, release the

PROGRAM button. To move to the next menu item,

press the CHANGE button.

Note: If no other button is pressed after five minutes, the clock will return to the

Normal Mode and the clock hands will reset.

Setting the Year, Month and Date

1. When the display flashes P1 dA E, press the ENTER

button.

2. Press the CHANGE button until the correct year

appears, then press the ENTER button.

3. Press the CHANGE button until the correct month

appears, then press the ENTER button.

4. Press the CHANGE button until the correct date

appears, then press the ENTER button.

5. When the display flashes the correct year, month and

date, press the ENTER button.

6. When the display flashes P1 dA E, press the CHANGE

button to move to Setting the Clock Time.

Setting the Clock Time

Note: Use a 24 hour and 60 minute format when setting the time. For example,

2:00 PM = 14:00.

1. Press the PROGRAM button for two seconds.

2. Press the CHANGE button until the display flashes

P2 CLoc, then press the ENTER button.

3. Press the CHANGE button until the correct hour

appears, then press the ENTER button.

4. Press the CHANGE button until the correct minute

appears, then press the ENTER button.

5. When the display flashes the correct time, press the

ENTER button.

6. When the display flashes P2 CLoc, press the

CHANGE button to move to the Daylight Saving

Time On/Off Setting.

Amano TCX-22 Operation Manual 7

Disabling/Enabling Daylight Saving Time (DST)

Note: When this setting is set to ON, the clock’s time will automatically change

for DST. When this setting is set to OFF, the clock’s time will not change

for DST. The dates to begin and end DST are set in the Other Options

Menu (See page 8).

1. When the display flashes P3 dL S , press the ENTER

button.

2. Press the CHANGE button to alternate between On

and Off.

3. When the display flashes the correct setting, press

the ENTER button.

4. When the display flashes P3 dL S , press the

CHANGE button to move to the Quick Set-Up Code

setting.

The Quick Set-Up Code Setting

Note: If you do not wish to use one of the Quick Set-Up Code settings, you may

set an alternate style on the following page.

1. When the display flashes P4 Prn , press the ENTER

button.

2. The display will flash the current setting. Press the

CHANGE button to scroll through each of the Quick

Set-Up Code Settings.

Code Print Style Print Direction

Pr-1 Day, 24Hr., 100th/Hr Right Side Print

Pr-2 Day, 12Hr., 60th/Hr. Right Side Print

Pr-3 Month, Date, 24Hr., 100th/Hr. Right Side Print

Pr-4 Month, Date, 12Hr., 60th/Hr. Right Side Print

Pr-5 2 Digit Year, Month, Date, 12Hr., 60th/Hr. Right Side Print

Pr-6 4 Digit Year, Month, Date, 12Hr., 60th/Hr. Right Side Print

Pr-7 4 Digit Year, Month, Date, 24Hr., 60th/Hr. Right Side Print

3. When the display flashes the correct setting, press the

ENTER button.

4. When the display flashes P4 Prn , press the CHANGE

button to move to the Other Options menu.

8 Amano TCX-22 Operation Manual

Accessing the Other Options Menu

1. When the display flashes P5 Oh r, press the ENTER

button.

2. The display will flash the first programming step in the

Other Options sub-menu. Press the CHANGE button

to advance through the menu selections.

Code

Menu Function

I1 Prn Set Print Style using Symbol or Print Style Codes

I2 LAn9 Sets the Language of the print out

I3 Prdr Sets the Print Direction (left or right hand)

I4 APr Disable, enable, or configure the Auto print option

I5 2Er0 Disable/enable Leading Zero in print out

I6 bdL Set the date that Daylight Saving Time begins

I7 EdL Set the date that Daylight Saving Time ends

I8 dIA9 Accesses the Diagnostic Routine

Setting Up Alternate Print Styles

Note: If you do not wish to use one of the Quick Set-Up Code settings, you may

select from the Alternate Print Style sub-menu.

1. When the display flashes11 Prn , press the ENTER

button.

2. Press the CHANGE button to move from Code setting

to Symbol setting. If you select Code, you must enter

a Print Style Code from Table 1 on the next page. If

you select Symbol, you can “build” a custom Print

Style using Tables 2 and 3 on pages 10 and 11.

3. When the display flashes the correct setting, press

the ENTER button.

Selecting a Print Code

Note: Refer to Table 1 on the next page for Print Style Codes.

1. When the display flashes Pr COdE, press the ENTER

button.

2. Press the CHANGE button until the desired number

appears in the first position. Press the ENTER button.

3. Press the CHANGE button until the desired number

appears in the second position. Press the ENTER

button.

Altri manuali per TCX-22

Indice

Lingue:

Altri manuali Amano Orologio

Amano

Amano MTX-30F Istruzioni operative originali

Amano

Amano PIX-3000x Series Manuale utente

Amano

Amano PIX-21 Manuale utente

Amano

Amano PIX-21 Manuale utente

Amano

Amano PR600 Series Manuale utente

Amano

Amano TS-3000i Manuale utente

Amano

Amano 3500 Series Manuale utente

Amano

Amano Time Partner TCX-11 Manuale utente

Amano

Amano PIX-75 Manuale utente

Amano

Amano BX-1600 Guida rapida

Amano

Amano MICRODER MR-7000 Series Manuale utente

Amano

Amano PIX-15 Manuale utente

Amano

Amano TCX-85 Manuale utente

Amano

Amano Amano TCX 21 Manuale utente

Amano

Amano BX 2000 Manuale utente

Amano

Amano 4700 Series Manuale utente

Amano

Amano PIX-3000x Series Manuale utente

Amano

Amano MJR-8500 SERIES Manuale utente

Amano

Amano EX-3500 Manuale utente

Amano

Amano CP-5000 Manuale utente

Amano

Amano PIX-55 Manuale utente

Amano

Amano MJR-8000 Series Guida alla risoluzione dei problemi

Amano

Amano EX3000N Manuale utente

Amano

Amano BX-1500 Manuale utente

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

La Crosse Technology

La Crosse Technology WS-8256-AL Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

La Crosse Technology

La Crosse Technology WT-3141b Manuale

La Crosse Technology

La Crosse Technology W86531 Manuale utente

Sharp

Sharp SPC900 Manuale utente

La Crosse Technology

La Crosse Technology 404-50447 Manuale utente

Datexx

Datexx DF0063 Manuale utente