American Standard R910 Flash Manuale utente

- 1 - M965908 (7/18)

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 140 years.

To ensure that your installation proceeds smoothly-please read

these instructions carefully before you begin.

Flash™

Deck Mount

Tub Systems

Rough Valve Kit

INSTALLATION

INSTRUCTIONS

R900

R910

ROUGHING-IN

FINISHED DECK VARIABILITY

ACCOMMODATES DECKING

MATERIAL (TILE, MARBLE,

CORIAN®...) TO 1" THICK

2. FINISHED DECK

3. FITTING MOUNTING SURFACE

4. ACRYLIC BATHS

DECK MOUNTING HOLES

ADJUSTABILITY, TO 1-1/2" THICK

1. DECK THICKNESS

TOTAL DECK THICKNESS

UP TO 2-1/2"

ADJUSTABILITY, TO 1-1/2" THICK

FINISHED

DECK

FITTING

MOUNTING

SURFACE

ACRYLIC

BATH

MOUNTING

1/2" COPPER

INLET SUPPLIES

1-3/8" D

MAX.

1-3/8" D MAX.

1-3/8" D

(2) 1-3/8" D

HOLES

(3) 1-3/8" D

HOLES

8" to 12" for Copper tubes

12" for Flex hoses

7-1/8"

1-1/2" D

8" to 12" for Copper tubes

12" for Flex hoses

2MOUNT SPOUT SHANK

SPOUT SHANK LOCK RING FLUSH WITH

TOP OF THREADS ON SPOUT SHANK

SPOUT SHANK

LOCK RING

SPOUT SHANK

FRICTION WASHER

SPOUT SHANK MOUNTING

NUT

1-1/2" MAX.

MOUNTING

SURFACE

PLUG

Certied to comply with ANSI A112.18.1

U.S. Patent No. D403,750

• Drill holes in mounting deck as shown on STEP 1. The maximum allowable deck thickness is 1-1/2".

• Unthread PLUG from SPOUT SHANK.

• Insert the SPOUT SHANK through the mounting deck from below. Assemble the SPOUT SHANK LOCK RING so it

is ush with the top of the threads on the SHANK.

• Tighten SPOUT SHANK MOUNTING NUT securely.

• Thread PLUG into SPOUT SHANK.

- 2 -

NOTE: For unﬁnished surface use larger VALVE LOCK RING.

NOTE: For ﬁnished surface use small VALVE LOCK RING.

Larger VALVE LOCK RING can be used on nished surface for Colony Pro, Quentin,

Estate, Fitzgerald, and Studio S.

• Insert the HOT and COLD VALVE BODIES through the mounting deck from below. The HOT VALVE BODY

is marked with a red label. Assemble the VALVE LOCK RINGS so they are ush with the top of the

VALVE BODIES.

• Tighten the VALVE BODY mounting nuts securely.

• Fasten the VALVE LOCK RINGS to the unnished surface with #8 at screws (Not provided)

• Thread HOSE CONNECTOR (1) onto VALVE BODY (3, 5). Thread HOSE CONNECTOR (2) onto TEE (4).

Tighten HOSE CONNECTOR (1) and (2) rmly.

Note: Hoses have different thread ends. Make sure to connect the ﬁne thread to the Hot/cold valve bodies.

• Insert HAND SHOWER SHANK (6) through mounting deck from top and secure it with MOUNTING NUT.

• Install HOSE and PLUG (7) from above deck.

MOUNT SIDE VALVE BODIES

M965908 (7/18)

SMALL

VALVE

LOCK RING

FITTING

MOUNTING

DECK

LARGE

VALVE

LOCK RING

SPOUT

SHANK

HOT

COLD

FRICTION WASHER

MOUNTING NUT

VALVE LOCK RING FLUSH WITH

TOP OF THREADS ON VALVE SHANK

VALVE

BODY

# 8 FLAT

SCREWS

FOR COPPER TUBE INSTALLATION (not supplied)

NOTE: Remove cartridge to protect from brazing process.

• Remove SLEEVES (1) from the SIDE VALVES and PLUG (5)

from spout shank.

• Remove CARTRIDGES from the Side Valves

(Follow instruction in Step 5 to remove Cartridges )

• Remove VALVE PIPE (2) if installing (R910) or

remove VALVE PLUG (3) if Installing (R900)

• Take INSERTS (4) out from SIDE VALVES

and TEE.

• Cut copper tubes as needed and braze joints.

- 3 -

MAKING CONNECTIONS

SERVICE — TO CHANGE THE DIRECTION OF HANDLE ROTATION

• Turn off the water supplies.

• Turn HANDLE to the off position and remove HANDLE.

• Unthread SCREW from CARTRIDGE.

• Remove the SLEEVE from the CARTRIDGE.

• Unscrew the VALVE LOCK NUT and remove.

(17 mm deep socket is required)

• Remove the CARTRIDGE.

• Remove the SPRING CLIP.

• Remove the STOP WASHER. Turn it 90˚ and replace.

• Replace the SPRING CLIP.

• Reverse the above steps to reassembly the components.

• If the spout drips, operate the handles several times

from the off to the on position. Do not force - the handles only turn 90˚

M965908 (7/18)

WATER SUPPLY

CONNECTIONS

WATER SUPPLY

CONNECTIONS

VALVE

LOCK NUT

SLEEVE

SCREW

VALVE

CARTRIDGE

SPRING

CLIP

STOP

WASHER

DEEP SOCKET

17 mm (11/16")

• Connect the water supply lines to the VALVE BODY.

For R910 installation, install HAND SHOWER HOSE (1) to the TEE.

• Insert HAND SHOWER HOSE (1) through HAND SHOWER SHANK (2) and

thread HAND SHOWER HOSE (1) into TEE (4).

• Place HOSE PLUG (3) into HAND SHOWER SHANK (2).

- 4 -

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1 (800) 442-1902

Weekdays 8:00 a.m. to 6:00 p.m. EST

IN CANADA 1-800-387-0369

(TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

IN MEXICO 01-800-839-1200

A911546-0070A

VALVE LOCK NUT

M906666-0070A

LARGE FIXATION NUT

M918464-0070A

SPINDLE

918555-0070A

SCREW

994053-0070A

VALVE CARTRIDGE

M962278-0070A

VALVE MOUNTING KIT

M970512-0070A

VALVE PIPING KIT (R910)

M970511-0070A

VALVE PIPING

PLUG (R900)

M906666-0070A

LARGE

FIXATION

NUT

M906699-0070A

SMALL

FIXATION

NUT

M970510-0070A

HAND SHOWER

HOLDER

(R910)

051343-0070A

HOSE KIT (R910)

A952849-0070A

CHECK VALVE

MODEL NUMBERS

R900 / R910

Flash™

Deck Mount

Tub Systems

Rough Valve Kit

M965908 (7/18)

Questo manuale è adatto per i seguenti modelli

Altri manuali American Standard Unità di controllo

American Standard

American Standard 6047.8 Series Manuale utente

American Standard

American Standard BORNEO Manuale utente

American Standard

American Standard SELECTRONIC 6590.525 Manuale utente

American Standard

American Standard R127 Manuale utente

American Standard

American Standard Ultima 6147SM Manuale utente

American Standard

American Standard BAYSPEK047A Istruzioni per il montaggio

American Standard

American Standard R129 Manuale utente

American Standard

American Standard SELECTRONIC 605XTMV1070 Manuale utente

American Standard

American Standard SELECTRONIC 606B.111 Manuale utente

American Standard

American Standard SELECTRONIC 6065.521 Manuale utente

American Standard

American Standard ACONT401AN21MA Manuale utente

American Standard

American Standard 50A65-475 Manuale utente

American Standard

American Standard Ultima Selectronic 6064.013 Manuale utente

American Standard

American Standard Ultima 6045.051 Manuale utente

American Standard

American Standard 7017 Series Manuale utente

American Standard

American Standard R110 Manuale utente

American Standard

American Standard AccuLink Platinum 1050 Manuale utente

American Standard

American Standard 6045.101 Manuale utente

American Standard

American Standard 6047.800 Manuale utente

American Standard

American Standard Ultima 6145SM Manuale utente

American Standard

American Standard SELECTRONIC 6067.111 Manuale utente

American Standard

American Standard SELECTRONIC 6066.111 Manuale utente

American Standard

American Standard R111 Manuale utente

American Standard

American Standard Selectronic 606B.X10 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente