AMX HPX-1600 Manuale utente

Installation Manual
Environment Accessories
HPX-1600
Retractable Connection Port
and HPX Modules
Last Revised:4/27/2012

AMX Limited Warranty and Disclaimer
This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which
include AMX Dealers, Distributors, VIP’s or other AMX authorized entity.
AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of
purchase, with the following exceptions:
• Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay compo-
nents are warranted for a period of one (1) year.
• Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year.
• AMX lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long
as the AMX lighting products are under warranty. AMX also guarantees the control of dimmable loads that are properly con-
nected to our lighting products. The dimming performance or quality there of is not guaranteed, impart due to the random combi-
nations of dimmers, lamps and ballasts or transformers.
• AMX software is warranted for a period of ninety (90) days.
• Batteries and incandescent lamps are not covered under the warranty.
• AMX AutoPatch Epica, Modula, Modula Series4, Modula CatPro Series and 8Y-3000 product models will be free of defects in
materials and manufacture at the time of sale and will remain in good working order for a period of three (3) years following the
date of the original sales invoice from AMX. The three-year warranty period will be extended to the life of the product (Limited
Lifetime Warranty) if the warranty card is filled out by the dealer and/or end user and returned to AMX so that AMX receives it
within thirty (30) days of the installation of equipment but no later than six (6) months from original AMX sales invoice date. The
life of the product extends until five (5) years after AMX ceases manufacturing the product model. The Limited Lifetime Warranty
applies to products in their original installation only. If a product is moved to a different installation, the Limited Lifetime Warranty
will no longer apply, and the product warranty will instead be the three (3) year Limited Warranty.
All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX
RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After
the 30-day period the RMA will be cancelled. Any shipments received not consistent with the RMA, or after the RMA is cancelled, will
be refused. AMX is not responsible for products returned without a valid RMA number.
AMX is not liable for any damages caused by its products or for the failure of its products to perform. This includes any lost profits, lost
savings, incidental damages, or consequential damages. AMX is not liable for any claim made by a third party or by an AMX Autho-
rized Partner for a third party.
This Limited Warranty does not apply to (a) any AMX product that has been modified, altered or repaired by an unauthorized agent or
improperly transported, stored, installed, used, or maintained; (b) damage caused by acts of nature, including flood, erosion, or earth-
quake; (c) damage caused by a sustained low or high voltage situation or by a low or high voltage disturbance, including brownouts,
sags, spikes, or power outages; or (d) damage caused by war, vandalism, theft, depletion, or obsolescence.
This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort claim (including
negligence and strict product liability), a contract claim, or any other claim. This limitation of liability cannot be waived or amended by
any person. This limitation of liability will be effective even if AMX or an authorized representative of AMX has been advised of the
possibility of any such damages. This limitation of liability, however, will not apply to claims for personal injury.
Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or exclusion of inci-
dental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not
apply. This Limited Warranty gives the owner specific legal rights. The owner may also have other rights that vary from state to state.
The owner is advised to consult applicable state laws for full determination of rights.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX MAKES NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX
EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT
MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. EXCEPT AS OTHERWISE LIMITED
BY APPLICABLE LAW, AMX RESERVES THE RIGHT TO MODIFY OR DISCONTINUE DESIGNS, SPECIFICATIONS, WARRAN-
TIES, PRICES, AND POLICIES WITHOUT NOTICE.

Table of Contents
i
HPX-1600 Retractable Connection Port
Table of Contents
HPX-1600 Hydraport ..........................................................................................1
Overview .................................................................................................................. 1
Common Application ................................................................................................ 1
Product Specifications ........................................................................................... 2
HPX-1600 Exploded View......................................................................................... 4
Installing the HPX-1600 ......................................................................................7
ATTENTION READ THIS FIRST!................................................................................. 7
Step 1 - Select an Installation Location ..................................................................... 7
Installation Location Notes.............................................................................................. 8
Step 2 - Cut the Hole In the Mounting Surface......................................................... 8
Step 3 - Prepare the Terminations .......................................................................... 10
Step 4 - Insert the Modules .................................................................................... 12
Step 5 - Install the Bottom Cover ........................................................................... 15
Step 6 - Install the Lift Spring Assemblies............................................................... 18
Step 7 - Install the System Into the Mounting Surface............................................ 20
Step 8 - Install the Retaining Ring........................................................................... 21
Step 9 - Install Power Cord (If Required) ................................................................ 23
Step 10 - Install Shields........................................................................................... 24
Step 11 - Secure Cables.......................................................................................... 25
HPX-P200-xx Power Outlet Module .................................................................27
Overview ................................................................................................................ 27
Product Specifications ........................................................................................... 27
Installing the HPX-P200-XX Power Outlet Module ................................................. 28
Disconnect the IEC C-14 Power Inlet Connector On the Hydraport Base Assembly ... 28
Step 1 - Connect the HPX-P200-xx to the HPX-1600 Power Inlet Assembly................. 29
Step 2 - Insert the Power Outlet Module Into the HPX-1600 Chassis ........................... 29
Step 3 - Install the 10 Amp Circuit Breaker (Included with HPX-PAK-XX Accessory Kit) 30
HPX-PA-HVI High Voltage Isolator ...................................................................31
Overview ................................................................................................................ 31
Product Specifications ........................................................................................... 31
Installation .............................................................................................................. 31
Tools Required .............................................................................................................. 31
Step 1 - Install Low-Voltage Secondary Circuit Modules ............................................... 32
Step 2 - Fold the High Voltage Isolator......................................................................... 32
Step 3 - Insert the High Voltage Isolator....................................................................... 32
Step 4 - Mark and Trim High Voltage Isolator............................................................... 33
Step 5 - Install AC Mains Power Outlets ....................................................................... 33

ii HPX-1600 Retractable Connection Port
Table of Contents

HPX-1600 Hydraport
1
HPX-1600 Retractable Connection Port
HPX-1600 Hydraport
Overview
The HPC-1600 HydraPort Retractable Connection Port (FG550-cc) is the first completely modular, retractable
cable connection system built to accommodate the diverse connection needs of conference and meeting room
visitors. This sleek, elegant, ergonomic design features a retractable base station that smoothly rises to expose
device connections and recedes back down and conceals the typical cable mess that can distract from the
business at hand (FIG. 1). All this while each cable stays connected.
Common Application
Boardrooms, conference rooms, meeting rooms or auditoriums where equipment is permanently installed in
the room and users must connect to that equipment from a conference table or lectern.
The HPX-1600 is designed to be mounted into a horizontal surface such as a conference room table or lectern
in order to provide connectivity for power, networking, Audio/Video and control.
Specific connectivity is accomplished by populating the HPX-1600 Base Assembly with various modules (see
the Product Specifications section on page 2 for a list of available modules).
FIG. 1 HPX-1600 Retractable Connection Port
HPX-1600 - raised HPX-1600 - lowered

HPX-1600 Hydraport
2HPX-1600 Retractable Connection Port
Product Specifications
HPX-1600 Specifications
Dimensions (HWD):
Max above mounting surface: 9.57" x 10.55" x 4.53" (243mm x 268mm x 115mm)
Max below mounting surface: 15.08" x 11.54" x 6.26" (383mm x 293mm x 159mm)
Min. mounting surface thickness: 19mm (.75in)
Max mounting surface thickness: 50mm (2.0in)
Weight:
Base Assembly only: 2 Kg (4.41 lbs)
Typical Installation: 3 Kg (6.61 lbs)
Models Available: • International, Black trim (FG550-BL)
• International, Silver trim (FG550-SL)
• North American, Black trim (FG550-01-BL)
• North American, Sliver trim (FG550-01-SL)
Enclosure Natural finish metal frame with plastic top and bottom covers moving ver-
tically in a plastic sleeve assembly.
• Matt black top cover and trim ring (FG550-BL, FG550-01-BL) or matt
silver top cover and trim ring (FG550-SL, FG550-01-SL).
• Matt black module face plates on all I/O modules.
Rear Connections • Included rear connection – IEC 320 C14 Power cord receptacle
(FG550-BL, FG550-SL), Included AC Power Cord (FG-550-01-BL,
FG550-01-SL).
• Rear connections for individual modules are routed through openings in
the unit’s bottom cover.
Compatibility: • HPX-P200-US, Hydraport Power Outlet Module – US (FG551-01)
• HPX-P200-UK, Hydraport Power Outlet Module – UK (FG551-11)
• HPX-P200-EU, Hydraport Power Outlet Module – EU (FG551-21)
• HPX-P200-AU, Hydraport Power Outlet Module – AU (FG551-31)
• HPX-AV100-CS+A, Hydraport Composite with Stereo Module
(FG552-10)
• HPX-AV100-RGB+A, Hydraport RGBHV with Stereo Module
(FG552-11)
• HPX-C5400-CS+A, Hydraport Composite + Stereo UPX CAT5 Kit with
HPX carrier (FG552-50-BL-K)
• HPX-C5400-VGA+A, Hydraport RGBHV + Stereo UPX CAT5 Kit with
HPX carrier (FG552-51-BL-K)
• HPX-C5400-CN+A, Hydraport Component + Stereo UPX CAT5 Kit with
HPX carrier (FG552-52-BL-K)
• HPX-N100-RJ45, Hydraport Single RJ45 Module (FG553-01)
• HPX-N102-RJ45, Hydraport Dual RJ45 Module (FG553-02)
• HPX-N100-USB, Hydraport Single USB Module (FG553-11)
• HPX-U100-BTN, Hydraport Single Button Module with LED (FG554-01)
• HPX-U400-MET-6N, Hydraport Metreau 6N Kit with HPX Carrier
(FG554-11-BL-K)
• HPX-U400-MET-13, Hydraport Metreau 13 Kit with HPX Carrier
(FG554-12-BL-K)
• HPX-U400-MET-7, Hydraport Metreau 7 Kit with HPX Carrier
(FG554-13-BL-K)
• HPX-U400-SP-08-AX, Hydraport Novara AxLink 8-button Module
(FG554-51-BL)
• HPX-U400-CP-1008, Hydraport Novara ControlPad 8-button Module
(FG554-71-BL)
• HPX-U200-MOD, Hydraport Modero Connection Module (FG554-81)

HPX-1600 Hydraport
3
HPX-1600 Retractable Connection Port
HPX-1600 Specifications (Cont.)
Compatibility (Cont.): • HPX-B050, Hydraport Blank Panel - 1/2 M Height (FG558-01)
• HPX-B100, Hydraport Blank Panel - 1 M Height (FG558-02)
• HPX-B200, Hydraport Blank Panel - 2 M Height (FG558-03)
• HPX-B050-L, Hydraport Custom Label Panel - 1/2 M Height (FG558-11)
• HPX-B100-L, Hydraport Custom Label Panel - 1 M Height (FG558-12)
• HPX-AC-SB, Hydraport Stop Block (FG559-01)
• HPX-AC-DA, Hydraport Decora Adapter Plate (FG559-11)
• HPX-AC-MB, Hydraport Accessory Mounting Bracket (FG559-21)
• HPX-PAK-US, Hydraport Power Accessory Kit w/ US power cord
(FG559-31)
• HPX-PAK-I, Hydraport Power Accessory Kit w/ no power cord
(FG559-32)
• HPX-AC-TK, Hydraport Installation Tool Kit (FG559-90)
Optional Accessories: HPX-AC-TK Hydraport Installation Tool Kit (FG559-90) see below.
HPX-AC-HSP Hydraport Spring Kit for Heavy Loads (FG559-42)
Certifications: UL 962A (N America versions only)
HPX-AC-TK Hydraport Installation Tool Kit (FG559-90)
Quantity Description
(1) HPX-AC-TMPLT 559-91 router template
(4) Mounting Strips
Note: The Mounting Strips are manufactured by 3M™.
The 3M part number is “17021P”.
(1) Router bit (Freud 12-128 or Whiteside 1072)
(1) Guide Bushing (Woodcraft 144693)
(1) Lock Nut (Woodcraft 144696)
(1) Installation Guide

HPX-1600 Hydraport
4HPX-1600 Retractable Connection Port
HPX-1600 Exploded View
FIG. 2 provides an exploded view of the HPX-1600 Hydraport System, with the main components referenced
in this document labelled. Use this diagram for reference while following the instructions provided in this
document.

HPX-1600 Hydraport
5
HPX-1600 Retractable Connection Port
FIG. 2 HPX-1600 Exploded View
Shield and (8)
Mounting Screws
Shield and (8)
Mounting Screws
Power Cord/Plug
Power Cord Bracket
Retaining Ring and
(4) Mounting Screws
Mounting Sleeve
Module Faceplates Module Faceplates
Spring Lift Assemblies
Bottom Cover
Top Cover
HPX-1600 Chassis
Aluminum Frame
Power Inlet Assembly PCB

HPX-1600 Hydraport
6HPX-1600 Retractable Connection Port
Indice
Altri manuali AMX Unità di controllo

AMX
AMX PLB-CF2 Manuale utente

AMX
AMX DG DVI MTP Manuale utente

AMX
AMX HPX-U100-BTN Manuale utente

AMX
AMX NetLinx NXM-MHS Manuale utente

AMX
AMX HPX-AV100-RGB+A Manuale utente

AMX
AMX HPX-N101-ETH-R Manuale utente

AMX
AMX AXB-DTMF Plus Manuale utente

AMX
AMX AXU-MSP8 Manuale utente

AMX
AMX HPX-AV102-RGB+A-R Manuale utente

AMX
AMX FG1010-720 Manuale utente
Manuali Unità di controllo popolari di altre marche

Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation
JS Automation MPC3034A Manuale utente

JAUDT
JAUDT SW GII 6406 Series Guida rapida

Spektrum
Spektrum Air Module System Manuale utente

BOC Edwards
BOC Edwards Q Series Manuale utente

























