Anritsu MS2690A Manuale utente

Document No.: M-W2914AE-9.0

ANRITSU CORPORATION

MS2690A/MS2691A/MS2692A

and MS2830A Signal Analyzer

Vector Signal Generator

Operation Manual

IQproducerTM

Ninth Edition

•For safety and warning information, please read this

manual before attempting to use the equipment.

•

Additional safety and warning information is provided

within the “MS2690A/MS2691A/MS2692A Signal

Analyzer Operation Manual (Mainframe Operation)”,

“MS2830A Signal Analyzer Operation Manual

(Mainframe Operation)”,

“MS2690A/MS2691A/MS2692A Option 020 Vector

Signal Generator (Operation)” and “MS2830A Vector

Signal Generator (Operation)” Please also refer to

either of these documents before using the

equipment.

•

Keep this manual with the equipment.

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings

of the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols

and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A and MS2830A Signal Analyzer

Vector Signal Generator

Operation Manual (IQproducerTM)

25 April 2007 (First Edition)

25 November 2014 (Ninth Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's

country of origin for re-

export from your

country.

Before re

exporting the product or manuals, please contact us to confirm

whet

her they are export-controlled items or not.

When you dispose of export

controlled items, the products/manuals need

to be broken/shredded so as not to be unlawfully used for military purpose.

Trademark and Registered Trademark

IQproducer

is a registered trademark of Anritsu Corporation.

Protection Against Computer Virus Infections

Prior to the software installation

Before installing this software or any other software recommended or

approved by Anritsu,

run

a virus scan on your computer, including

removable media (e.g. USB memory stick and CF memory card) you

want to connect to your computer.

When using this softwar

e and connecting with the measuring instrument

•Copying files and data

On your computer, do not save any copies other than the following:

•Files and data provided by Anritsu

•Files created by this software

•Files specified in this document

Before copying these files and/or data, run a virus

scan, including

removable media (e.g. USB memory stick and CF memory card).

•Connecting to network

Connect your computer to the network that provides adequate

protection against computer viruses.

Cautions on Proper Operation of Software

This software may not operate normally if any of the following operations

are performed

on your computer:

•Simultaneously

running any software other than that recommended or

approved by Anritsu

•Closing the lid (Laptop computer)

•Turning on the screen saver function

•Turning on the battery-power saving function (Laptop computer)

For how to turn off the functions, refer to the

operation manual

that came

with your computer.

About This Manual

Composition of Operation Manuals

The operation manuals for the MS2690A/MS2691A/MS2692A or

MS2830A Signal Analyzer are comprised as shown in the figure below.

Vector Signal Generator Operation Manual (IQproducerTM)

Vector Signal Generator Operation Manual (Standard Waveform Pattern)

Communication System Supporting IQproducerTM Operation Manual

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Main Frame Operation)

MS2690A/MS2691A/MS2692A and MS2830A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2830A Signal Analyzer

Operation Manual

(Main Frame Operation)Or

MS2690A/MS2691A/MS2692A

Signal Analyzer

Option 020: Vector Signal

Generator Operation Manual

(Operation)

MS2830A

Signal Analyzer Vector Signal

Generator Operation Manual

(Operation)

MS2690A/MS2691A/MS2692A

Signal Analyzer

Option 020: Vector Signal

Generator Operation Manual

(Remote Control)

MS2830A

Signal Analyzer Vector Signal

Generator Operation Manual

(Remote Control)

Signal Analyzer Operation Manual (Mainframe Operation)

Signal Analyzer Operation Manual (Mainframe Remote Control)

These manuals describe basic operating methods, maintenance

procedures, common functions, and common remote control of the signal

analyzer mainframe.

Vector Signal Generator Operation Manual (Operation)

This manual describes functions, operating methods, and so on of the

vector signal generator (option).

Vector Signal Generator Operation Manual (Remote Control)

This manual describes remote control of the vector signal generator

(option).

Vector Signal Generator Operation Manual (IQproducerTM) (This

manual)

This manual describes functions, operating methods, and so on of the

IQproducer, which is application software used with the vector signal

generator (option).

Vector Signal Generator Operation Manual (Standard Waveform

Pattern)

This manual describes details on the standard waveform pattern data

used with the vector signal generator (option).

III

Appendix Index

Table of Contents

About This Manual........................................ I

Chapter 1 Overview.................................... 1-1

1.1 Overview .................................................................... 1-2

1.2 Functions ................................................................... 1-3

Chapter 2 Installation/Uninstallation ........ 2-1

2.1 Operating Environment.............................................. 2-2

2.2 Installation/Uninstallation Procedure ......................... 2-3

Chapter 3 Basic Operations ...................... 3-1

3.1 Operations for Menu .................................................. 3-2

3.2 Operations for Dialog Box.......................................... 3-4

Chapter 4 Operations for Each Function . 4-1

4.1 Starting/Exiting IQproducerTM .................................... 4-4

4.2 Common Platform Screen ......................................... 4-6

4.3 CCDF Graph Display ................................................. 4-10

4.4 FFT Graph Display .................................................... 4-24

4.5 File Conversion on Convert Screen........................... 4-38

4.6 W-CDMA Downlink Waveform Pattern Generation

Function ..................................................................... 4-64

4.7 W-CDMA Uplink Waveform Pattern Generation

Function ..................................................................... 4-91

4.8 Help Screen ............................................................... 4-114

4.9 Time Domain Graph Display...................................... 4-115

4.10 Clipping Function ....................................................... 4-134

Chapter 5 Waveform Pattern Generation . 5-1

5.1 Generating Waveform Pattern ................................... 5-2

IV.

Appendix A Error Messages....................... A-1

Index .......................................................... Index-1

Chapter 1 Overview

1-1

Overview

This chapter provides an overview of the IQproducerTM for the

MS2690A/MS2691A/MS2692A or MS2830A Signal Analyzer Vector

Signal Generator option.

1.1 Overview .................................................................... 1-2

1.2 Functions ................................................................... 1-3

1.2.1 Signal generation application corresponding to

communications system ................................ 1-3

1.2.2 CCDF graph display function ........................ 1-3

1.2.3 FFT graph display function............................ 1-3

1.2.4 File conversion function................................. 1-3

1.2.5 Time domain graph display function.............. 1-4

1.2.6 Clipping function ............................................ 1-4

Chapter 1 Overview

1-2

1.1 Overview

The IQproducerTM is Windows application software used to generate a

modulated waveform pattern to be used by the

MS2690A/MS2691A/MS2692A or MS2830A Signal Analyzer Vector

Signal Generator option.

Note that purchase of a license key corresponding to the serial number of

your Vector Signal Generator option is required when actually using a

waveform file with the Vector Signal Generator option, a file generated

by the modulated waveform pattern generator IQproducerTM (hereinafter,

referred to as “signal generation application”) corresponding to each

communication system.

The IQproducerTM also enables the Complimentary Cumulative

Distribution Function (CCDF) results and Fast Fourier Transform (FFT)

results of a generated modulated waveform pattern to be displayed in a

graph. In addition, it can convert an ASCII-format waveform pattern

generated by your signal generation application tool to a binary-format

waveform pattern that can be used in the Vector Signal Generator option.

This operation manual describes the functions of the IQproducerTM,

except for the signal generation application.

Altri manuali per MS2690A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Anritsu Strumento di misura

Anritsu

Anritsu MT1810A Manuale utente

Anritsu

Anritsu MX269017A Manuale utente

Anritsu

Anritsu MS2830A Manuale utente

Anritsu

Anritsu VNA Master MS2024B Manuale utente

Anritsu

Anritsu Site Master S820D Manuale utente

Anritsu

Anritsu VectorStar ME7838D Manuale utente

Anritsu

Anritsu Spectrum Master MS2721B Manuale utente

Anritsu

Anritsu PIM Master MW82119A Manuale utente

Anritsu

Anritsu Microwave Site Master S820E Manuale utente

Anritsu

Anritsu MT8801C Manuale utente

Anritsu

Anritsu VectorStar ME7838A Manuale utente

Anritsu

Anritsu ShockLine MS46121A Series Manuale del proprietario

Anritsu

Anritsu VectorStar ME7848A Series Manuale utente

Anritsu

Anritsu Site Master S331L Manuale utente

Anritsu

Anritsu BTS Master Manuale utente

Anritsu

Anritsu ShockLine MS46522A Manuale utente

Anritsu

Anritsu VNA master Manuale utente

Anritsu

Anritsu ShockLine MS46322A Series Manuale utente

Anritsu

Anritsu VectorStar ME7838AX Manuale utente

Anritsu

Anritsu MS9740A Manuale utente

Anritsu

Anritsu MS462 Series Manuale utente

Anritsu

Anritsu MT8802A Manuale utente

Anritsu

Anritsu MP1763C Manuale utente

Anritsu

Anritsu Network Master Series Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente